# data[].attributes.body
ALL ON ETHERNET

# data[].attributes.headline
Ethernet/IP (Ethernet Industrial Protocol) is a network communication standard capable of handling large amounts of data at speeds of 10 Mbps or 100 Mbps, and at up to 1500 bytes per packet. The specification uses an open protocol at the application layer

# data[].attributes.subject
Ethernet/IP (Ethernet Industrial Protocol) is a network communication standard capable of handling large amounts of data at speeds of 10 Mbps or 100 Mbps, and at up to 1500 bytes per packet. The specification uses an open protocol at the application layer

# data[].attributes.headline
The Internet Message Access Protocol (IMAP) is a mail protocol used for accessing email on a remote web server from a local client. IMAP and POP3 are the two most commonly used Internet mail protocols for retrieving emails. Both protocols are supported by all modern email clients and web servers.

# data[].attributes.subject
The Internet Message Access Protocol (IMAP) is a mail protocol used for accessing email on a remote web server from a local client. IMAP and POP3 are the two most commonly used Internet mail protocols for retrieving emails. Both protocols are supported by all modern email clients and web servers.

# data[].attributes.body
MLG wifi
Wireless networking - which is often just known as Wi-Fi - is a way of getting broadband internet without wires.

Wi-Fi allows you to connect several computers at once, anywhere in the house - or if you have a laptop, to even use your computer in the garden. You don’t need to install extra phone lines or cables.
Wi-Fi creates a network in your home or office – a little zone where computers can get broadband internet. It uses radio waves, just like TV or mobile phones. You may sometimes hear this zone referred to as a WLAN (Wireless Local Area Network).

A device called a wireless transmitter receives information from the internet via your broadband connection. The transmitter converts the information into a radio signal and sends it.

You could think of the transmitter as a mini radio station, broadcasting signals sent from the internet. The ‘audience’ for these transmissions is the computer (or computers, as more than one can connect at the same time) which receives the radio signal via something called a wireless adapter.

The whole process, meanwhile, works in reverse, with the computer sending information to the wireless transmitter. It then converts them and sends them via your broadband connection.
To use Wi-Fi you will need certain equipment:

A wireless transmitter, also known as a Wireless Access Point (WAP)

A Wi-Fi adapter on every computer that will use Wi-Fi

You may find that you already have a Wi-Fi network, as many ISPs (internet service providers) are setting up new customers with Wi-Fi from the outset.

If not, you could call your ISP and ask to upgrade. They might even upgrade you for free - and send you some or all of the equipment. If not, you might consider checking whether other ISPs are offering Wi-Fi to new customers.

In any case, you can buy the equipment yourself and set up your own Wi-Fi network using your existing broadband connection.

Many ISPs will supply you with a router, modem and wireless transmitter combined in one device, which it calls ‘the router’. To make your Wi-Fi set-up as simple as possible, you should consider using a similar device.

The router plugs directly into a phone socket and doesn’t need a computer to run it, so you don’t have to set up your computer next to the router.

Computers – mainly laptops – increasingly have built-in Wi-Fi receivers. If not, the simplest method of installing a receiver is a dongle - a little device that plugs into a USB port and transmits between your PC and wireless router.

# data[].attributes.headline
Wi-Fi or WiFi (/ˈwaɪ faɪ/)[1] is a technology that allows electronic devices to connect to a wireless LAN (WLAN) network, mainly using the 2.4 gigahertz (12 cm) UHF and 5 gigahertz (6 cm) SHF ISM radio bands. A WLAN is usually password protected, but may be open, which allows any device within its range to access the resources of the WLAN network.The Wi-Fi Alliance defines Wi-Fi as any "wireless local area network" (WLAN) product based on the Institute of Electrical and Electronics Engineers' (IEEE) 802.11 standards.[2] However, the term "Wi-Fi" is used in general English as a synonym for "WLAN" since most modern WLANs are based on these standards. "Wi-Fi" is a trademark of the Wi-Fi Alliance. The "Wi-Fi Certified" trademark can only be used by Wi-Fi products that successfully complete Wi-Fi Alliance interoperability certification testing.

# data[].attributes.subject
Wi-Fi or WiFi (/ˈwaɪ faɪ/)[1] is a technology that allows electronic devices to connect to a wireless LAN (WLAN) network, mainly using the 2.4 gigahertz (12 cm) UHF and 5 gigahertz (6 cm) SHF ISM radio bands. A WLAN is usually password protected, but may be open, which allows any device within its range to access the resources of the WLAN network.The Wi-Fi Alliance defines Wi-Fi as any "wireless local area network" (WLAN) product based on the Institute of Electrical and Electronics Engineers' (IEEE) 802.11 standards.[2] However, the term "Wi-Fi" is used in general English as a synonym for "WLAN" since most modern WLANs are based on these standards. "Wi-Fi" is a trademark of the Wi-Fi Alliance. The "Wi-Fi Certified" trademark can only be used by Wi-Fi products that successfully complete Wi-Fi Alliance interoperability certification testing.

# data[].attributes.headline
IMAP (Internet Message Access Protocol) is a standard email protocol that stores email messages on a mail server, but allows the end user to view and manipulate the messages as though they were stored locally on the end user's computing device(s). This allows users to organize messages into folders, have multiple client applications know which messages have been read, flag messages for urgency or follow-up and save draft messages on the server.

# data[].attributes.subject
IMAP (Internet Message Access Protocol) is a standard email protocol that stores email messages on a mail server, but allows the end user to view and manipulate the messages as though they were stored locally on the end user's computing device(s). This allows users to organize messages into folders, have multiple client applications know which messages have been read, flag messages for urgency or follow-up and save draft messages on the server.

# data[].attributes.headline
 bailey clarke        Internet Protocol: Internet Protocol; plural noun: Internet Protocolsa set of rules governing the format of data sent over the Internet or other network

# data[].attributes.subject
 bailey clarke        Internet Protocol: Internet Protocol; plural noun: Internet Protocolsa set of rules governing the format of data sent over the Internet or other network

# data[].attributes.body
The Transmission Control Protocol is one of the main protocols of the Internet protocol suite. It originated in the initial network implementation in which it complemented the Internet Protocol. Therefore, the entire suite is commonly referred to as TCP/IP. TCP provides reliable, ordered, and error-checked delivery of a stream of octets between applications running on hosts communicating by an IP network. Major Internet applications such as the World Wide Web, email, remote administration and file transfer rely on TCP. Applications that do not require reliable data stream service may use the User Datagram Protocol, which provides a connectionless datagram service that emphasizes reduced latency over reliability.

# data[].attributes.body
this is how email works by transporting data to a different device

# data[].attributes.body
POP3 (Post Office Protocol 3) is the most recent version of a standard protocol for receiving e-mail. POP3 is a client/server protocol in which e-mail is received and held for you by your Internet server

# data[].attributes.body
HTTP = HyperTextTransferProtocol
HTTPS = HyperTextTransferProtocolSecure

# data[].attributes.headline
Post Office Protocol version 3 (POP3) is a standard mail protocol used to receive emails from a remote server to a local email client. POP3 allows you to download email messages on your local computer and read them even when you are offline.

# data[].attributes.subject
Post Office Protocol version 3 (POP3) is a standard mail protocol used to receive emails from a remote server to a local email client. POP3 allows you to download email messages on your local computer and read them even when you are offline.

# data[].attributes.body
olly

# data[].attributes.body
The Hypertext Transfer Protocol is an application protocol for distributed, collaborative, hypermedia information systems. HTTP is the foundation of data communication for the World Wide Web. Hypertext is structured text that uses logical links between nodes containing text. HTTP is the protocol to exchange or transfer hypertext.

# data[].attributes.body
Default Gateway

# data[].attributes.body
Simple Mail Transfer Protocol (SMTP) is an Internet standard for electronic mail (email) transmission. First defined by RFC 821 in 1982, it was last updated in 2008 with the Extended SMTP additions by RFC 5321—which is the protocol in widespread use today. SMTPby default uses TCP port 25. Although electronic mail servers and other mail transfer agents use SMTP to send and receive mail messages, user-level client mail applications typically use SMTP only for sending messages to a mail server for relaying. For retrieving messages, client applications usually use either POP3 or IMAP.