# data[].attributes.body
BabyTech started off when Dane and I decided to be partners. Mainly because Dane was sick one day and I don't have other friends so I didn't have a partner.

# data[].attributes.body
The statistics of our baby warmer are fairly good. Our baby's average temperature was 37.2 degrees Celcius, the time outside the healthy range was 101 minutes, and our design cost $80.

# data[].attributes.body
Our purpose in life is to design the best baby incubator possible. we will try to keep the costs low, have an average temperature close to 37 degrees celcius, and minimize the time spent outside of the healthy zone: 36.5 degrees celcius to 37.5 degrees celcius.

# data[].attributes.body
Our team realized that this criteria was essential to the growth of a baby. When building our incubator we decided that we wanted to keep this below 90 minutes. hile we were unable to achieve our goal, we made sure that the highest temperature our incubator achieved was only 37.6 degrees celcius, which is only 0.1 degrees warmer than the healthy range.

# data[].attributes.body
Our phase change materials worked to keep our baby warm because of the combination we used. Our incubator used two PCM B's and two PCM C's, which kept the babie's temperature warm. PCM A, though it was very cheap,

# data[].attributes.body
Though our group did not necissarily prioritize this criteria, we still knew how important it was to keep the baby's average temperatre as close to 37 degrees Celcius as possible, since this would also help minimize the time outside the healthy range.

# data[].attributes.body
In our project we decided to prioritize a low cost, and a good average temperature. whil doing this, we had to sacrifice our time spent outside the healthy range. considering this, we wanted to minimize the temperature that our incubator reached. we were able to sucessfully do this, and made sure that the incubator only reached 37.6 degrees celsius. this means that the entire time that the baby was outside the healthy zone, it was only 0.1 degrees outside of it.

# data[].attributes.body
The total cost of our baby incubator design was $80. This cost is very close to the optimal cost set by our director of $75, and over time, this cost will help people around the world be able to afford the care they need for their baby. We did not use any insulators for our design, which helped reduce the cost of it. With insulators, our design would have easily been over 100 dollars.