# data[].attributes.headline
Shutter speed is the length of time when the sensor inside the camera is exposed to light

# data[].attributes.subject
Shutter speed is the length of time when the sensor inside the camera is exposed to light

# data[].attributes.headline
ISO is the level of sensitivity of your camera light. The lower the ISO number, the less sensitive it is to the light, while a higher ISO number increases the sensitivity of your camera. The part of the camera that can change sensitivity is called an “image sensor". It is the most important part of the camera and it is responsible for collecting light and changing it into an image. With increased sensitivity, your camera sensor can capture images in low-light environments without having to use a flash. But higher sensitivity the more “noise” is added to the pictures.

# data[].attributes.subject
ISO is the level of sensitivity of your camera light. The lower the ISO number, the less sensitive it is to the light, while a higher ISO number increases the sensitivity of your camera. The part of the camera that can change sensitivity is called an “image sensor". It is the most important part of the camera and it is responsible for collecting light and changing it into an image. With increased sensitivity, your camera sensor can capture images in low-light environments without having to use a flash. But higher sensitivity the more “noise” is added to the pictures.

# data[].attributes.headline
RAW- Files they are processed directly from the cameras sensor, they are not compressed and they are very high quality.

# data[].attributes.subject
RAW- Files they are processed directly from the cameras sensor, they are not compressed and they are very high quality.

# data[].attributes.headline
TIFF-Is a lossless file format, its saved in layers so there is no loss in quality when printed

# data[].attributes.subject
TIFF-Is a lossless file format, its saved in layers so there is no loss in quality when printed

# data[].attributes.headline
JPEG- Joint Photographic Experts Research Group. Default for most digital cameras and you can select the level of quality (S,M,L)

# data[].attributes.subject
JPEG- Joint Photographic Experts Research Group. Default for most digital cameras and you can select the level of quality (S,M,L)

# data[].attributes.body
An aperture is a hole or an opening through which light travels.The aperture and focal length of an optical system determine the con.

# data[].attributes.body
Are tiny squares of colour, the word pixels stands for picture information. they align on a grid which is called rasterized. You can only change pixels in three way:
Colour
Size
Amount

# data[].attributes.headline
The cameras lowest ISO setting results in the least amount of noise, with noise increasing as the ISO value is raised. High levels of noise dulls down the quality of an image.

# data[].attributes.subject
The cameras lowest ISO setting results in the least amount of noise, with noise increasing as the ISO value is raised. High levels of noise dulls down the quality of an image.

# data[].attributes.body
ISO:
The ISO is used to measure the cameras sensitivity, the higher the ISO the brighter the image. and the brighter the image the more noise.
the lower the ISO the darker the image and the higher the image quality.

Aperture:
an aperture is a hole which light travels.  the bigger the hole the more light can travel through making the exposure higher and the image brighter, the smaller the aperture the less light coming through therefor lowering the exposure consequently making the image darker.

Shutter Speed:
The duration of an exposure, how long the camera is exposed to light is controlled by the shutter speed. the longer the shutter is opened, the more it has been exposed to light therefore the image is brighter. on the other hand, the lower the shutter speed, the less time it has been exposed to light therefore the darker the light.

# data[].attributes.headline
Projection is the technique used to enlarge an image using light and a magnifying tecniques

# data[].attributes.subject
Projection is the technique used to enlarge an image using light and a magnifying tecniques

# data[].attributes.headline
These images are before and after the brightness and contrast have been changed to enhance the photos. Most of the images that I chose to edit where better after they were edited however I noticed the quality of some of the over exposed images went down significantly after they were edited. The expose is the amount of time the camera is visible to light. The longer the image is exposed to light is dependent on the shutter speed. The shutter speed is the aperture in the camera which lets light in, the longer the aperture is open the more light gets in therefore the brighter the image. The brightness of the image can also be controlled by the ISO. The ISO is the cameras sensitivity to light, the higher the ISO the brighter the image. If all of these camera elements are controlled using the exposure triangle, the overall image will be of good quality before its has been edited.

# data[].attributes.subject
These images are before and after the brightness and contrast have been changed to enhance the photos. Most of the images that I chose to edit where better after they were edited however I noticed the quality of some of the over exposed images went down significantly after they were edited. The expose is the amount of time the camera is visible to light. The longer the image is exposed to light is dependent on the shutter speed. The shutter speed is the aperture in the camera which lets light in, the longer the aperture is open the more light gets in therefore the brighter the image. The brightness of the image can also be controlled by the ISO. The ISO is the cameras sensitivity to light, the higher the ISO the brighter the image. If all of these camera elements are controlled using the exposure triangle, the overall image will be of good quality before its has been edited.

# data[].attributes.body
Light drawings are drawings using light to create effects similar to drawing. what ever the light touches is shown on the camera. This is due to the high shutter speed of 10 seconds and ISO of 100.  Here are some of my most successful attempts of light drawings.

# data[].attributes.body
file>open>image

# data[].attributes.body
Exposure is controlled by shutter speed, aperture, and ISO speed. "Stops" let you change and swap these to produce your desired image. A stop is a doubling and halving of the images light intake. the more light in the atmosphere the less amount of stops needed

# data[].attributes.body
Metering is how your camera determines what the correct shutter speed ISO and aperture should be, depending on the amount of light that goes into the camera.

Bracketing is the process of taking one lighter and one darker image this is done to insure at least one good image is taken, ideal for when you cant see the photo your taking.

# data[].attributes.headline
Focus is the able to manipulate the camera in order to make the image appear clear and precise, so texture is detectable.

# data[].attributes.subject
Focus is the able to manipulate the camera in order to make the image appear clear and precise, so texture is detectable.

# data[].attributes.body
This is my most successful image taken from the Brett Weston inspired studio shoot the images were taken in black and white which adds to the feel of the image. I like the textures and tones of this image, it looks delicate more like petals than a vegetable. I chose this image as my most successful image because of the grey tonal range and textures identified by the precise use of focus and zoom you can start to see the cells through the thin layers and the angle makes the image look more artistic. ISO 100, F/14, 1/6 Sec. From taking this photograph, I learnt to simplify my compositions and how to apply the rule of thirds to improve my image.

# data[].attributes.body
This image is my least successful attempt at using focus and lighting effectively to create a aesthetically pleasing image based on Brett Weston's photography. I think this image is unsuccessful because I haven't used the lighting effectively to enhance my image therefore it hasn't