# data[].attributes.body
I then recorded and ticked off everything I had completed.

# data[].attributes.body
I placed 3 hoppers into her enclosure making sure they were dusted in the calcium powder. I then locked the enclosure back up and put the equipment away that I had used.

# data[].attributes.body
I placed the bowl back into the enclosure and filled it back up. I then collected the equipment I needed to then feed her.

# data[].attributes.body
I then placed Penny back into her enclosure and removed the water dish so that I could wash it outand  refil it with fresh water.

# data[].attributes.body
I placed Penny onto the scales and then recorded her weight. Her weight was 85g. It had gone up 5g from the last time that I had weighed her.

# data[].attributes.body
After checking over the enclosure I then removed Penny so I could check her weight.

# data[].attributes.body
The first thing I did before monitoring Penny was wash my hands. I then went over to her enclosure and spot cleaned it.

# data[].attributes.body
Once I'd provided the food I then locked the enclosure back up and filled out the log book making sure I ticked off everything I completed.

# data[].attributes.body
I then used the tweezers to remove 3 of the hoppers from the plastic container and place them since the calcium powders that's provided in the enclosure inside a small bowl. I made sure that all 3 of the hoppers were lightly dusted in a layer of the calcium powder.

# data[].attributes.body
The equipment I needed was the live food of Hoppers and tweezers.

# data[].attributes.body
Once I had recorded what her weight was I then placed her back into the enclosure and wiped down the scales. I then collected the equipment I needed to feed her.

# data[].attributes.body
positiveI then removed Penny from her enclosure so that I could weigh her. Her weight seemed to be the same as it was and there was no difference since last time I monitored her. This is a positive thing as her weight is staying constant throughout the weeks. Her weight was 80g.

# data[].attributes.body
After providing the Gecko wish fresh water, I then sprayed the moss at the front of the vivarium so that it was damp.

# data[].attributes.body
I then removed the water dish and cleaned it out. Once cleaned out I then placed it back inside of the enclosure and filled it back up.

# data[].attributes.body
The next thing I did was check over the enclosure to see if there was any left over food from the last time the Gecko was fed. There was one mealworm left inside the enclosure.
I also spot cleaned the enclosure.

# data[].attributes.body
The first thing I did was was my hands and make sure I had the correct uniform on.

# data[].attributes.body
Once everything was completed I then filled out the log book making sure I ticked off everything I had done.

# data[].attributes.body
I then double checked to make sure that the enclosure was clean and I also sprayed the moss which is along the front of the enclosure in the right hand side so that it was a damp area for the Gecko.

# data[].attributes.body
Once I'd finished observing Penny I then removed the water bowl from the enclosure so I was able to wash it out. I then placed the bowl back into the enclosure and then re filled it with fresh water.

# data[].attributes.body
After I'd placed the hoppers into the enclosure I then observed Penny for 5-10 minutes to see if she was interested or ate any of the food. In the time I was watching her she consumed one hopper.

# data[].attributes.body
Once i had recorded her weight I then collected the equipment I needed to feed her which was the live food of hoppers and tweezers. I removed the bowl which contained the calcium powder and placed it onto the table. I then used the tweezers to remove the hoppers and place them into the bowl so that they would get dusted in the calcium powder. I provided Penny with 3 hoppers.

# data[].attributes.body
After spot cleaning the enclosure I then removed Penny and weighed her. Penny's weight was 80g. I then sprayed and wiped the scales and placed her back into the enclosure.

# data[].attributes.body
After checking if there was any food left over I then spot checked the housing and removed any feaces as it's unhygienic and could cause the Gecko to get ill.

# data[].attributes.body
The next thing I did was check the enclosure to see if there was any food left over from the last feed, which there wasn't. This is a good thing as it shows the Gecko is consuming the food that's provided.

# data[].attributes.body
Before health checking and feeding Penny the first thing I did was wash my hands and put on the correct uniform and tie my hair up out of the way.

# data[].attributes.body
I then locked the enclosure back up and put the live food back into the fridge.

# data[].attributes.body
Once I'd provided the Gecko with the food I then washed out the water bowl, cleaned it and placed it back into the enclosure and then filled it back up.

# data[].attributes.body
After checking over the enclosure I then removed 2 hoppers from the tub and placed them inside the bowl inside the enclosure that has calcium power in it and made sure that the hoppers were dusted
in it.

# data[].attributes.body
I then checked over the enclosure looking for any feaces that would need to be removed and also checking if any food has been left since the last feed. There was 1 mealworm left from the last time she was fed.

# data[].attributes.body
Before feeding the Gecko I removed it from its enclosure and weighed it. I made a note of it's weight and then placed her back into the enclosure.

# data[].attributes.body
After washing my hands I then collected the equipment that I needed which was the live food of hoppers.

# data[].attributes.body
The first thing I did was  wash my hands and made sure that I was wearing the correct uniform.