# data[].attributes.body
This 3D printing project was my first using autocad to design something. It was more fun than i expected , feels really happy when the led light starts to shine.
during the days , i had met quite a few problem , some of them is expected some of it are not.such as i was quite surprice that the time taken to print the led holder was so long and so many people was using the printer, so i had to wake up really early those days to made sure i am the first one reach there so i can print my project.
this suitation tells me that i had really need to plan carfully before hand to have a back up plan when things does go as what i think it should be. over all i felt this design thinking is really really help full , this new skill can make all lot of project easier , we can just print the staff we need and dont have to waste our time. Hope thats more of such event in coming days.

# data[].attributes.body
This was my first experience with 3D printing, and a challenging one at that. I experienced many difficulties going through this assignment due to lack of information, reference material and also time. However, thanks to some of my classmates, I was able to overcome these difficulties. The journey was a long and hard fought one - was the outcome expected or worthwhile? I have yet to find out. Nevertheless, this was a learning experience and I was happy to have gained a few new skills.

# data[].attributes.body
3D was something i always wanted to try. It just seemed so amazing that technoloy now allows us to print things in 3D. From printing car parts and even printing house parts. This project really opened my eyes to the new upcomig technologies that are available for us to use

# data[].attributes.body
All my life I was only thought to use a flat canvas to project my ideas and thoughts, as well as to "bring forth" my emotions and feelings into the said form. The 2D canvas was just as so; a flat window to a world that is seemingly unreachable and untouchable.

Now, when I learned how to used the 3D Designing software, my canvas is now more able to carry forth my ideas into place. It has done what I could never do on a 2D canvas; to realise it. It has brought me a step closer to being able to express myself in a more precise (no pun intended) and a more lively way.

Apart from the artistic point of view, I also learnt some technical skills in being able to use the 3D printing machine; the machine uses multiple layers to design our "idea". And hence "ideas" that have a over-hanging structure will have a prinited support attached to it, and it needs to be carved or filed appropriately to fit and tailor to the design we so specifcally want.

Overall, I find that learning how to print out my own 3D design was a truly learning experience; it not only taught me technical and mathematical skills, it has also allowed me to better realise my "ideas" in a form. I genuinly hope that there would be more of such assignments or workshops that requires the use of the 3D Printing.

# data[].attributes.body
After taking on this Design Thinking task, it has been an eye-opening experience for me. I found out that the 3D machines isnt really advance at the moment and constantly made mistakes during printing, rendering the entire product useless. However, I also understood the importance of giving the exact measurements of the product to ensure a proper fitting of the battery and LED. Lastly, I also realised that I should have really started printing my design early since the printers are always in use. In a nutshell, I understood the importance of finishing a task early as well as doing it precisely.

# data[].attributes.body
This is the first time that I have gotten an opportunity to print a 3D model. There were a lot of trial and error, especially when creating the 3D model on AutoCad. As the 3D printing takes a lot of time, I have learnt that it is always best to try and print it early as it may take more than one time to make the 3D model turn out the way we wanted it to be. Overall, a very interesting project to work on.

# data[].attributes.body
Having not done any 3D printing prior to this assignment, I have learnt a great set of skills that allow me to turn my virtual 3D model into an actual physical object.

First thing to note is that there is only so much the 3D printer can handle. For your model to be printed properly, it has to be able to stick fixedly onto the Print Bed when printing from start to finish. If part of your model elevates at a certain angle above the Print Bed, support structures have to be printed with it to prevent your model from collapsing during printing. The 3D printer prints layer by layer, hence, you have to think ahead when designing your model if you want to make sure that your product turns out exactly what you want it to be.

All in all, this assignment taught me how to think outside the box, troubleshoot problems and had made me learn how to use computer programs that can be useful future projects.

# data[].attributes.body
This design thinking has really got my brain thinking. 3D printing is especially an eye opener as i have learnt a lot from it. I also learnt first hand how hard problems can get as there are too many variation that may happen. 3D printing is a good example has sometimes the battery hole is too small or too big, the led light fall off unexpectedly. All this requires not only accurate measurement but also multiple checks to ensure that the product is successful. If there is 1 thing that i would take away from this is that always expect the unexpected as life is not kind to us as to let everything flow as we wanted.

# data[].attributes.body
Creating the LED holder using 123D design is definitely something new and interesting for me. The process is quite tedious as our scales and measurements have to be accurate. Also, being able to use the 3D printing is really exciting as we are able to see our creation comes to life.

# data[].attributes.body
After the whole experience of making this 3D model. I reaslied that I should plan my time wisely and effectively. As usually doing it the first time would not be successful.This 3D model has also expanded my creativity of coming up with interesting designs, how to make use of shapes and combining them to make them into exciting objects.

# data[].attributes.body
Creating an object using 123Design is definitely a new thing for me. I did have fun creating the object. However I did experience some failure which is the battery hole was too big for the battery .To be honest, I did not plan before creating the object as I did it last minute. Overall, it was a good and memorable experience. :)

# data[].attributes.body
3D printing has taught me about how one has to plan well before and after the completion of the project. You have to measure the dimensions properly, or you can have something that won't fit. You also have to do things early, or you might mess up and be stuck waiting for people to finish printing theirs before yours.

# data[].attributes.body
I was already interested in 3D printing before the project. So when I had the chance to 3D print while at the same time counting as a grade was very convenient. Having already played with other 3D software like Google Sketchup, 123D was a comparably simple to use software. Since 3D printing is relatively new, the machines rather slow as a result trying to guess and check the appropriate size from my design was rather hard to do. Also, the chances of failure was a major inconvenience when trying to meet the dateline. In all, for me, I really enjoyed doing the design and seeing the product after hours of waiting even if it was a failure or a success but hopefully ,in the future, the waiting times are shorter.

# data[].attributes.body
This 3D printing assignment was a very interesting yet stressful assignment. It was the first time I used the 123D design software, it was complicating at first but the end design was beautiful. It was stressful as my design had to reprint a second time due to the wrong sizes of the LED hole and battery hole. However, at the second attempt, I managed to print out my 3D object successfully. Overall, it was a great learning experience even though there were challenges faced.

# data[].attributes.body
Learning how to use 3D printing is very fun and interesting even though it was quite irritating at times when the shapes could not merge. The printing of LED holder had problems too, especially having to reprint it many times due the wrong measurements of the LED hole and unable to print round shapes if no support is used.

# data[].attributes.body
The 3D printing assignment was tedious but exciting. As i am able to create a design using 123D and watch my model become a reality. It allows us to personalize our designs and give it unique features which is different from others. However, there will be problems such as the fitting if led and battery(which wouldn't fit) and also the availability of the 3D Printer.
In conclusion, this is a very interesting and good learning experience.

# data[].attributes.body
One of the most annoying project I have ever done.Firstly,have to wake up super early to print.Secondly,the dimension of the battery and LED light were not really accurate.It was really irritating but in the end we all made it one way or another.The most important thing that I learnt from this project is that even though we did last minute work,it still worked out fine.Moral of the story,it is never too late to achieve your goal when you put in maximum effort.

# data[].attributes.body
3D printing is hard at first but overall it's a good experience as I got to learn the basics of designing a 3D object. This also activates my creativity thinking. Also, this skill can be used, perhaps in near future.

# data[].attributes.body
elaboratedWell the experience on 3D printing was fun and amazing as its new and the possibilities are amazing however 3d printing can be imperfect and requires alot of planning.Overall 10/10 for 3D and 7/10 for autocad as that is just dry.

# data[].attributes.body
The 123D design has been very interesting as it was my first time doing 3d printing. The limited number of printer, constant breakdown and long printing time has also taught me to start and plan early and to manage my time well.

# data[].attributes.body
The 123d programme was very fun to experiment with. However, the programme had certain features that made the designing process incredibly annoying, such as how one controls the camera.
The 3d printing process was a good, but tedious learning process, as I had to coordinate with other classmates to print our models together, but the 3d printers were in constant use by students in multiple courses which resulted in very long wait times

# data[].attributes.body
3D printing was fun but tedious at the same time. It allowed me to create things that look interesting but with limitations such as the size and how some parts of the objects required support. I had to reprint my LED holder multiple times due to issues such as the LED light hole and battery hole not being of the correct size. However the experience was nonetheless memorable and fun.

# data[].attributes.body
123D design is a very irritating application to me, especially navigating the direction or angle of the object. I have learnt to be flexible with the measurements, as what is printed may not be exactly how you might want it to be. The 3D printers may be fascinating, but I still dislike the waiting time and the strong competition of us using the 3D printers.

# data[].attributes.body
3D printing is actually a very interesting technology development and with the help of various programs like the one I used, 123D design. It helps me create any types of design and with no limitations. However learning how to use the program was slightly tedious.....
It has been a very interesting and creative learning process.

# data[].attributes.body
This practice is very beneficial as I now know its uses and am sure that I would need this skill in the future. It is also my first time using 3D printing and I enjoyed it.

# data[].attributes.body
Doing this 3D assignment has allowed me to learn about 123D Autodesk. I learnt that there is a workshop for the printing and making of things we want to make. I had difficulty fitting the LED light and the battery into my design as I could not get my measurements right at first.(including covers)

# data[].attributes.body
The making of the LED holder exposed me to a 3D printer that I have never thought it existed and the 123Design program that helps me to make a 3D shape . The experience with the 123D program and the 3D printing helped me to understand that it is important to start making the LED holder early instead of only doing it when the deadline is near as there are factors like how the 3D printing is not a guaranteed success and the dimensions of the design is not a definite right. I had a lot of failures with the LED holder and thus , allowing me to understand the meaning of "failures makes success"

# data[].attributes.body
Learning how to do 3D printing was interesting and it taught me how to use design apps as well. 3D printing is not always very straight forward, as there will be problems along the way.

# data[].attributes.body
Using 3D printing is awesome. I have learned how to print good 3D shapes. I love the learning of new things and want many more such experience. Willingness is always the matter for anyone, but not me.

# data[].attributes.body
Making of the 3D LED holder is an interesting project as it allows me to know more about 3D printing and its limitations such as one of my design failed because when it starts to print. The molten material drips on to a hole as a result covering the LED hole.

# data[].attributes.body
To be honest, 3D printing is a bother but it is quite worthwhile and fun. I only heard of 3D printing but this is my first time doing it. Having to create new ideas using only several shapes was quite challenging as you had to plan everything including to make sure that the battery does not drop out and LED will light up. It was more of a trial and error thing.

# data[].attributes.body
123D design is a very annoying programme to begin with. I had troubles at first but as weeks go by I learnt more. I also learnt that you have to do things early because every time I want to print my LED light, it's always busy.

# data[].attributes.body
Creating this LED holder was interesting because this is my first time using the 123D design software and printing something out from a 3D printing. The first time I printed my design, the battery and LED won't fit and it was frustrating and there's always a queue to print so it was quite time consuming.

# data[].attributes.body
My learning experience for me to use 123D design it is very interesting, where I got the chance to print a 3D model from what I have drawn. It has set me thinking about the possibility of future 3D printing design can be beyond our imagination. It simply amazed me and I really fascinated from it.

# data[].attributes.body
Getting the opportunity to use 123D design and printing out objects in 3D was a first for me and I must say that I was very excited initially but then it died down after awhile after I realized we had to spend so much time and effort in printing such simple objects.... till the point where the printer broke down:p but it was fun nonetheless!!

# data[].attributes.body
Learning to use 123D design was an interesting experience and being able to create 3d models of objects was fun. I enjoyed thinking of and making the design for my LED light. However, when it came down to the actual printing it was a frustrating process for me. The printers were always busy and when I did get to print, it printed something with different measurements...
Overall it was a good learning experience.

# data[].attributes.body
Creating the LED holder was cool, and learning how 3D printers work was good. I want to attend more workshops by makers academy already.

# data[].attributes.body
Creating the LED holder has introduced me to 123D Design, and it's always interesting and enriching to learn to use new programs.