# data[].attributes.body
1. First, write the equation in slope intercept form if it isn't.

2. Now, using the slope-intercept form, ploy the y intercept in your graph.

3. Now using plot the slope starting from the y-intercept.

4. Draw a line to connect all of the points in the graph.

# data[].attributes.body
1. Write the equation in slope intercept form

2. Plot the y intercept

3. graph your point

4. Draw a line through your point

# data[].attributes.body
1. First turn the equation into slope intercept form

2. Then graph the y-intercept

3. then the slope

4. later connect your poinst to form a straight line

# data[].attributes.body
1. Write the equation in slope intercept form.

2. Look for the y-intercept

3. Graph

# data[].attributes.body
1. makes sure the equation is in slope intercept form

2.. plot the Y intercept

3. Graph the slope in graph.

4. Draw a line of best fit

# data[].attributes.body
1. Write the equation in slope-intercept form

2. look the Y intercept

3. Plot the Point

4. connect the dots

# data[].attributes.body
1.First turn your equation into slope intercept form.

2.plot your y intercept

3. graph your slope and plot your points in the graph.

4. draw a line through your points plotted or a line of best fit.

# data[].attributes.body
1, put the equations in slope intercept form

2, graph the y intercept

3, plot the slope as rise over run

4, connect the points (line of best fit

# data[].attributes.body
1. Make sure the equation is in slope intercept form if not turn the equation into one.

2. Graph or Plot the Y-Intercept in the Graph.

3.Graph the slope plotting the points in the graph.

4. Draw line of best fit by connecting all the points with a Line.

# data[].attributes.body
1. First write it in slope intercept form.

2. Plot the Y-intercept in the graph.

3. Graph the slope.

4. Draw the line of best fit.

# data[].attributes.body
write the equation in slope intercept for

look for the y intercept

graph

# data[].attributes.body
Write the equation in slope intercept form

Graph y intercept

Graph x intercept

Connect the dots

# data[].attributes.body
1.Write an equation on slope intercept form.

2. Look for the y intercept

3. Graph the y intercept and then graph the slope

4. The last step is to join the dots with a line.

# data[].attributes.body
The steps to graph slope intercept form is:

1. Write the equation in slope intercept form.

2. plot the y intercept first.

3. do rise over run.

4. draw the line.

# data[].attributes.body
The steps to graph a linear equations are to write the equation in slope intercept form, look for the y-intercept, graph the y-intercept and then graph the slope. The last step is to join the dots with a line.

# data[].attributes.body
1.Write an equation on slope intercept form.

2. Graph/Find the y intercept

3.Graph the slope

4.Connect the dots.

# data[].attributes.body
To graph a linear equation you must write the equation in slope intercept form then look for the y-intercept and graph the slope. After ploting the y-intercept and the slope you must check the inequaliitie sign if its less than or greater than the line is dotted and if the sign is less than or equal or greater than or equal the line is solid.

# data[].attributes.body
1. Rewrite the equation in slope intercept form.

2. Find the y-intercept and graph it.

3. Graph the slope.

4. Connect the dots to form a line.

# data[].attributes.body
1. Write the equation into slope intercept form.

2. Look for the y-intercept and graph it.

3. Graph the slope.

4. Connect the points to form a line.

# data[].attributes.body
Rewrite the equation on slope intercept form

look for the y intercept and graph it

graph the slope given

connect the points to create a line.

# data[].attributes.body
First I have to write the equation on slope intercept form

Then When I am done with that step I have to [plot the y intercept on the graph

After I have to graph my line

# data[].attributes.body
you wrie equation slope intercet.

then y intercept finded.

graph the slope

then you put the 2 together and you

# data[].attributes.body
Check to see that the equation is in slope intercept form and then

1. Place the y intercept in the y axis.

2.  Now take the slope And do rise over run

3. Connect the dots to make a line

# data[].attributes.body
-first you write the equation in slope-intercept form.

-then you look for the y-intercept and you graph it.

-then you graph the slope.

-then you connect the two dots to make a line.

# data[].attributes.body
First I have to write the equation on slope intercept form

then after that i need to graph tyne y intercept in a graph

When I am done with that have to graph the slope

# data[].attributes.body
Make sure the equation is in slope intercept if not make it into slope intercept form.

Graph the y intercept

Graph the slope

# data[].attributes.body
1. Write the equation in slope Intercept form.

2. Graph the y-intercept.

3. Then follow the slope (rise/run).

4. Draw the line.

# data[].attributes.body
1. Rewrite the equation as slope intercept form

2. Graph the y intercept

3. Graph the slope

4. Connect the dots to make a line.

# data[].attributes.body
1. Write the equation in slope intercept form.

2. Graph the Y-intercept

3. Graph the slope

4. Connect the points with a line

# data[].attributes.body
Step 1: Turn the equation in slope intercept form.

Step 2: Graph the y-intercept.

Step 3: Look at the slope and plot it in.

Step 4: Follow the points to connect them together using the rise over run strategy.

# data[].attributes.body
1. write the equation in slope-intercept form

2. plot the y-intercept

3. follow the slope

4. connect the points

# data[].attributes.body
1. Make sure the equation is in slope intercept

2. identify the y intercept, graph it.

3. identify the slope

4. Use rise over run in the slope to graph the line starting with the y-intercept.

# data[].attributes.body
b

# data[].attributes.body
1. Make sure the equation is in slope-intercept form.

2. Plot the y-intercept

3. Make the slop into a fraction

4. Make the line bigger by using rise over run

# data[].attributes.body
The steps to solve a linear equations are:

1.First you make sure the equation is in slope-interecept form

2. Look for the y-interecpt and plot it

3. Find the slope and plot it.

4. Connect the dots

# data[].attributes.body
1 Make sure your equation is in slope-intercept form

2 Graph y intercept

3 graph the slope

4 continue graphing your dots following the slope

5 connect the dots

# data[].attributes.body
1- You write the equation given in slope- intercept form.

2- Find and graph the y-intercept.

3- Plot the slope

4- At the end, connect the points

# data[].attributes.body
1. Write the Equation in slope intercept from

2. Plot the point which is the y intercept (for example if the y intercept is 5 the the point plotted should be 0,5)

3. plot the slope

4. connect the points

# data[].attributes.body
1. First turn the equation into slope intercept form

2. Then graph the y-intercept

3. Use the slope as rise over run

4. Connect all the dots

# data[].attributes.body
The First Main steps to graph a linear equation are to change the equation that is given into a slope Intercept form in this case (y = mx + b). m = is your slope and b = is your y-intercept. Now, That you have that knowledge you can plot the Y-intercept in the graph, in this case as an example -2. When you changed the equation, it has a Slope Intercept which is in the form rise/run. In this case, let's use 4/5 You have to go Up 4 and 5 to the right, depending if it's negative and positive. When you are done, and you have completed must of the graph, With a ruler connect all of the points that you labeled that are part of the line.

# data[].attributes.body
1. write equation in slope intercept form

2. find and plot y-intercept

3. find the slope and plot it

4. connect all dots

# data[].attributes.body
1. You need to write the equation in slope-intercept form.
2. Find Y intercept and plot it.
3. Find the slope and graph it.
4.Connect all the dots.

# data[].attributes.body
Write the equation in slope intercept form

# data[].attributes.body
1. Write the equation in slope-intercept form.

2. Then graph the y-intercept, by plotting the points.

3. Then follow the slope in order to create other points.

4. At the end connect all of the points.

# data[].attributes.body
1. Write the equation in slope-intercept

2. Look for Y-intercept and plot it

3. move point on the slope

4. connect dots and make a line

# data[].attributes.body
1. Write the equation in slope-intercept form

2. Find the y-intercept and plot it

4. find the slope of the intercept and plot it

5. connect all the points in the coordinate plane and plot the point

# data[].attributes.body
1. Write the equation in slope-intercept form

2. Look for the y- intercept and plot it in the coordinate plane.

3. Find the slope and plot the point

4. Connect the points to form a line.

# data[].attributes.body
1 make sure it is in slope intercept form

2 then you graph the y intercept

3 find the slope and graph it

# data[].attributes.body
1. You need to write the equation in slope intercept form.
2.

# data[].attributes.body
1. write the equation in slope-intercept form

2. plot the y-intercept

3. plot the slope

4. connect the points

# data[].attributes.body
1. Write the equation in slope-intercept form if it isn't already written like that.

2. Plot the y-intercept.

3. Then plot the slope.

4. Connect the dots.

# data[].attributes.body
1. First you need to write it in slope-intercept form.

2. Second graph the y-intercept

3. Plot the slope and then connect the points.

# data[].attributes.body
1. Write the equation in slope intercept

2. Then plot the y-intercept

3. Then plot slope

4. Then connect the points together to make a line

# data[].attributes.body
1. The first step is to be sure that it is in slope-intercept form

2. plot the y-intercept

3. Then you need keep plotting the points using you slope.

4. then connect the points together.

# data[].attributes.body
1. First make sure the equation is written in slope-intercept form

2. put a point in the y-intercept.

3. move the point base on the slope.

4. connect the dots to make a line.

# data[].attributes.body
1. First you need to be able to tell if the equation is written in slope-intercept form, if it isn't, make sure you turn it into it.

2. Once you have this done, you can go a plot a point on the y-intercept

3. Then you can keep on ploting points by using your slope.

When you connect those points, they SHOULD ALWAYS give you a line if you plotted them correctly.

# data[].attributes.body
1. First make sure that the equation is written in slope-intercept form; if not, then change it to slope intercept.

2. then, graph the y-intercept.

3. Next, follow the slope.

4. connect the points with a line

# data[].attributes.body
1. First turn the equation into slope intercept form.

2. The graph the y-intercept.

3. The grapgh the slope.

4. At the end connect your point to form a straight line.

# data[].attributes.body
Could you please list the steps to graph a linear equation?