# data[].attributes.body
After observing and drawing my sketch, I think ...

# data[].attributes.body
After observing the video of the magic bottle I came to the conclusion that there could possibly be a magnet stuck to the bottom of the inside of the bottle and that there is either a magnet within the rope or that the particles the rope is made out of has magnetic material within it and therefore it sticks enough for you to be able to hold the bottle up with the string. You were able to pull the string out without much force, but it was strong enough to hold the bottle without any extra weight pulling it down.

# data[].attributes.body
My drawing accounts for the observation of the magic bottle because it demonstrates careful and logical observations of the movements while the magic trick was being performed. After viewing the video, I analyzed that it is possible that there are two hooks attached to inside the bottle. I believe the hook is facing down when the bottle is right side up. Then when the bottle is place upside down the rope side that has less frayed ends attach to the hook’s sharp end, which secures the rope. That is why the bottle can hang from the string. Prior to the rope detaching from the bottle I noticed that the bottle was not flipped upside down. Instead the hand was holding the bottom of the bottle through that motion the rope untucks from the hook. 

# data[].attributes.body
My picture shows the rope in the bottle wedged in with a ball. I added tape around the ball, because I know when the bottle was flipped upside down the ball wedged the string, but somehow a sticky substance around the ball would hold up stronger and longer.

If there’s a ball, maybe there is something soft glued on the bottom of the bottle so when the bottle is turned back upfront the ball falls and there’s no noise.

# data[].attributes.body
I thought maybe a small bouncing ball would be perfect...

# data[].attributes.body
As shows from my drawing, I realized after you placed the rope inside the bottle, you flipped it upside down and when you did that, rope was stuck in it. I predicted that ...

# data[].attributes.body
I think that when the bottle was flipped upside down, some heavy object...

# data[].attributes.body
I think that the explanation for the bottle trick is that there is a magnet glued at the bottom of the bottle and there’s a second magnet on the inside of the rope which is what causes for the rope to stick inside. The magnets are strong enough for the professor to be able to hold the rope upright and he just has to pull a little on the rope to make the magnets unstick allowing for the rope to come out. I came to this conclusion because I felt like one side of the rope looked different almost like it was straight which is why I think this end had the magnet.

# data[].attributes.body
I think that this trick is accomplished with hidden magnets in the rope and the bottle. If there were magnets with opposite forces in the bottom of the bottle and the end of the rope they would connect when the rope is placed in the bottle. This would allow the rope to not fall out and for the bottle o be held upside down. Even though he said the rope was ordinary the magnet could be small enough to not be noticeable in the video.

# data[].attributes.body
I believe there is something inside the bottle such as a piece of wood ,ball or other stuff that can put inside the bottle; and  after I put the ball into the bottom and flip it down, the rope will stuck and it can nor come out.

# data[].attributes.body
When we were provided with a closer view of the rope in the video I noticed the ends of the rope were more stretched out so the width was greater on the ends compared to the middle of the rope. Therefore I have concluded that in the bottle there must be a level of some sort that is broken in half and allows just enough room for the end of the rope to make it through. When the rope is pulled upon it becomes trapped in the middle. The thickness of the bottom of the rope stays between the middle space of the leveler. However, with just enough force the rope is let free and comes out of the bottle.

# data[].attributes.body
I think there is the squishy sand in the bottle, sort of like a liquid form of play dough. So when the bottle gets turned upside down, it morphs around the rope ( which is why the bottle was held up side down for such a long period of time) and this then causes the rope to be stuck in the bottle for a little bit of time before the sand falls back down into the bottom of the bottle. A way that I could check to see if I'm correct is to look inside the bottle. Two ways that my way of thinking demonstrated how science really works is that I observed the bottle and I listed all the materials that could possibly make the rope stuck in the bottle but also make it easy to come out.

# data[].attributes.body
There are two bottles in my drawing. They both have the same components but demonstrate how the pieces move while the trick is being performed. Both bottles have blades just bellow the neck of the bottle. The blades are position downward so when the rope goes in the bottle, it will just slide in, when the rope is pulled out, it will get caught on the blades. There are also wedged below the blades that will push the bladed out of the way when pushed out.

The bottle on the left shows what happens when the bottle is hanging from the rope. The blades are pushed in with a lever on the side of the bottle, so the rope will get caught on the blades.

The bottle on the left shows how the rope comes out of the bottle. First the rope is pushed deeper into the bottle to dislodge the blades from the rope, then the wedges are pushed up by a lever under the bottle to move the blades out of the way and to block the blades so the rope doesn’t get caught again.

Not all angles were shown in the video so that why I believe these levers were hidden from plain sight.

# data[].attributes.body
For this idea, I had thought of it similar to getting buried in the sand. When the sand gets compacted around you, it begins to be difficult to get out and acts almost like a solid. So, I believe that there was some object that was small and dense like sand that could act like a liquid when the string enters, but compressed the objects to act like a solid which would trap the string.

# data[].attributes.body
My drawing represents my observation from the Magic Bottle Video. I believe that there is a .... As shown in my drawing, when the bottle is right side up ....

# data[].attributes.body
3. Next, explain how your drawing accounts for your observations of the magic bottle.
When you show us the “ordinary piece of rope” I saw that it did not bend freely on your left hand like it did on your right. The end of the rope was sticking straight up. Implying that there is something inside of the rope that should not be there. I was thinking a magnet is there so that it could stick to another magnet that is already attached to the bottom of the Magic Bottle. This is why you push the rope all the way down to the bottom of the bottle. Since the magnet is attached to the bottom that is the reason why your bottle is blacked out. So, we cannot see what is inside of it, the magnet. I suggested there is a magnet because a rope and a plastic bottle do not need a big magnet to hold them together. Their weight is relatively light. As well as it will not take a lot of force to pull it off. Hence why it seems effortless when you pull it back out.

# data[].attributes.body
I believe that there is nothing inside of the bottle. I think that when the bottle gets turned upside down that the rope curves around the inside of the bottle and creates a knot in the neck of the bottle which prevents the rope from coming out. When the rope is loosened then the knot comes undone, making the rope come out.

# data[].attributes.body
At first, I was amazed by the impressive magic trick; however, magic is unreal. Magic are tricks that have an explanation. For this trick, I believed that there had to be something inside the bottle to stop the rope from completely falling off...

# data[].attributes.body
I believe that there is a ... that keeps the rope in place. When the bottle was turned upside-down, this ...

# data[].attributes.body
I think my drawing accounts for my observations because I think there could possibly be another bottle within the magic bottle causing the rope to stay inside then be released.

# data[].attributes.body
Explanation: I think there is a nail that helps the loop on the side of the actual rope get stuck. I think this because I know magic is just changing your area of focus so I tried to pay attention to small details and saw the small loop. I think there is a small nail because that is the only thing I could think of that would grip it enough to be be able to after let it unhook.

# data[].attributes.body
My drawing accounts for my observation because I believe that there is an object in the bottle ...

# data[].attributes.body
The Magic bottle.

There is a small ball inside the bottle that gets stuck between the bottle neck and the rope.

# data[].attributes.body
The ball is causing enough friction...

# data[].attributes.body
There is something that is wedging the extra space the string cannot cover in the bottle. I will say a ball since it is a obvious choice. The bottle is flipped upside down to set the ball as the wedge and then it keeps the string in the bottle. Undoing the trick would be just to pulling the string out slowly so the ball will not come out with the string immediately.

# data[].attributes.body
I believe that there is a small ball inside the bottle that keeps the string  "stuck"...