# data[].attributes.body
This bowl was created from a failed bowl. I took of the messed up part of the first bowl and there was a perfectly centered little piece of clay left so i took it and threw it into a small bowl.

# data[].attributes.body
I threw a medium size bowl and after throwing a began to pull corners out of the bowl making it a square bowl. I then took it further by pushing out the walls of the bowl inside all four corners giving the bowl a curvy lip.

# data[].attributes.body
With this bowl i threw a somewhat big sized bowl and after i was done throwing, i pushed in two sides of the lip to give it some character.

# data[].attributes.body
I threw this plate like any other plate and afterwards came with the wire cutters and made the plate flat on four sides with the corners still rounded. I cut the clay so the plate would be different from other regular plates.

# data[].attributes.body
My bottle is more simple that i plan to do different colors on when glazing. I finished this bottle pretty quickly and it turned out really well compared to my other attempts. Its around 10 inches tall and has the lip going outward a little at the top.

# data[].attributes.body
for the vase i wanted it wide and super big so thats what i did. Its a pretty big and heavy piece. I made it big for my room because i use my double bubbles to hold stuff which are to small so i made it big to store a lot more stuff. I trimmed the bottom to be the smallest point and it comes down at an angle. I also did an orientation in four spots around the vase making little indents to give it some character. The bottoms is nicely trimmed and its ready to go.

# data[].attributes.body
This planter was my first attempt and it turned out really well. It is pretty large as well so any side plant is perfect. I poked three holes into the planter as you can see from the other picture. The plate was the perfect size i wanted. I like the simple look with no orientation and i plan to do certain glaze patterns to the planter.

# data[].attributes.body
I threw 4 different bowls all pretty simple because i have a plan to glaze them really cool and they are all going to be presents for Christmas for family. every one is a basic bowl so i put just the pictures of them up on here. Each bowl is trimmed and ready to fire.

# data[].attributes.body
This is my chip and dip. I made this on the second try because the first one got cracks in it. I made a lip orientation on the plate to make it different from a normal chip dip. The cup in the center is a second try because the first one I did was too thin and it collapsed. I completed this one pretty quickly because I knew what to do after making mistakes with the first one. I am definitely the most proud of this piece so far.

# data[].attributes.body
This is one of the bowls I have made. I threw a normal bowl with a wide lip and thought it looked great. But I wasn't satisfied how basic it was so I decided to use my thumb and push out the clay all around the inside of the bowl. My thumb is what created the bumps on the outside so thats why I named it a thumb bowl. I completed this very quick and it was the first thing I threw on the wheel.

# data[].attributes.body
The lip bowl is similar to the thumb bowl. I decided to throw a smaller bowl which turned out pretty good. I wanted to do another orientation so I moved the one side of the lip a little outwards which you can see in the picture.

# data[].attributes.body
This piece i decided to go back to ceramics one and make a double bubble. I made the double bubble to work on my hand control when making a piece. This was my first try and it turned out really well. i decided to make little marks around the bottom half of the piece to make it different and i plan on doing creative stuff with glaze later on.

# data[].attributes.body
This was my first try at a Chip Dip. It didnt work out because it started to crack along different parts of the lip. The bowl was very difficult to do at first and in the picture that was my third try at the center bowl. The lip on the plate was also not vertical enough to where chips would probably fall out which i made sure to so in the second chip dip.