# data[].attributes.body
Instead of recording photographic images, they use a light sensitive microchip that is called a "charge-coupled device" which converts what the lens sees into digital format the camera can read.

# data[].attributes.body
Light enters into the lens and then into the prism translating it from light to digital.

# data[].attributes.body
- A record of how long the camera has been rolling.
- SanDisk Extreme PRO SD UHS.
- You want to reset the timecode because you can get a more precise time.

# data[].attributes.body
kelvin is the measurement of color.
Its important to customize your white balance in each room because each room has different lighting. Cool and Warm lighting are the most common tones of light.

# data[].attributes.body
CMOS stands for 'complementary metal-oxide semiconductor. ' A CMOS sensor will convert the charge from a pixel to a voltage at the spot where the pixels are created.

# data[].attributes.body
1.A fluid head tripod has a fluid system that provides resistances for tilt and pan.

2. A ball head is meant for photography and has a less smooth pan and tilt since it isn't using liquid.

3.robert Miller created a fluid tripod for motion pictures aka movies so it would be a more smooth pan and tilt for shots

# data[].attributes.body
1.The timecode is a time set in the top left corner that tells you how much time you've been recording.

2.so you know how long you've been recording

3. Sandisk extreme PRO SD UHS-I is the one they use

# data[].attributes.body
CCD), measures light with a half-inch (about 1 cm) panel of 300,000 to 500,000 tiny light-sensitive diodes called photosites.

# data[].attributes.body
a camcorder "sees" the world through lenses. In a film camera, the lenses serve to focus the light from a scene onto film treated with chemicals that have a controlled reaction to light.

# data[].attributes.body
1.kelvin shows the temperature of the shot you are taking and the higher the number the warmer the shot.
2. It's important to customize your whitebalence so your shots look as natural in the scene your in.
3. The higher the number the warmer or reder shot will be and the lower your number the colder or bluer it'll be it will be

# data[].attributes.body
1. Makes it easy to move cam without a lot of noise
2.there is a ball
3.Robert Eric Miller, an Australian engineer from Sydney, invented the fluid head for motion

# data[].attributes.body
1.the camera uses a ccd pr cmos sensor that converts optical images into digital images
2. A ccd is a charged-coupled device which is light detector
3. CMOS stands for Complementar Metal Oxide Semiconductor which is a pixel detector aka light sensor

# data[].attributes.body
Kelvin changes color to adjust for the temperature or lights

different lights are used in different places so then you would have to adjust the camera white balance for it

you could get warmer which looks red an then you can get cooler which looks more blue

# data[].attributes.body
1. Kelvin is the color temperature of the camera. For example, 6500K is more warm than 3000K.
2.Because some rooms can have different types of lighting that reflect different colors.
3. Higher Kelvin temperature means warmer colors, lower kelvin means colder.

# data[].attributes.body
-use electronic sensors in the back of the camera to capture the light.
-Charge Coupled Device is a highly sensitive photon detector.
-battery-powered and stores the hard drive's configuration and other information.

# data[].attributes.body
It is the number at which the camera is formatted to. If you record for 2 hours and 5 seconds, that will be your timecode as well.
2. It makes it a lot easier to keep track of your timing and footage you have so far.
3. Typically they use SDHC

# data[].attributes.body
1 It has a system that helps provide options for resistance and gives freedom with your movement.
2. It is a ball meant for photography since there is less panning and movement.
3. It was created by Robert Eric Miller, who is a Australian engineer. They invented it for easier motion.