# data[].attributes.attachment_link.readable_text
Erosion is the geological process in which earthen materials are worn away and transported by natural forces such as wind or water. A similar process, weathering, breaks down or dissolves rock, but does not involve movement. Erosion is the opposite of deposition, the geological process in which earthen materials are deposited, or built up, on a landform. Most erosion is performed by liquid water, wind, or ice (usually in the form of a glacier). If the wind is dusty, or water or glacial ice is muddy, erosion is taking place. The brown color indicates that bits of rock and soil are suspended in the fluid (air or water) and being transported from one place to another. This transported material is called sediment.

Physical erosion describes the process of rocks changing their physical properties without changing their basic chemical composition. Physical erosion often causes rocks to get smaller or smoother. Rocks eroded through physical erosion often form clastic sediments. Clastic sediments are composed of fragments of older rocks that have been transported from their place of origin. Landslides and other forms of mass wasting are associated with physical weathering. These processes cause rocks to dislodge from hillsides and crumble as they tumble down a slope.

Plant growth can also contribute to physical erosion in a process called bioerosion. Plants break up earthen materials as they take root, and can create cracks and crevices in rocks they encounter. Ice and liquid water can also contribute to physical erosion as their movement forces rocks to crash together or crack apart. Some rocks shatter and crumble, while others are worn away. River rocks are often much smoother than rocks found elsewhere, for instance, because they have been eroded by constant contact with other river rocks.

Erosion by Water

Liquid water is the major agent of erosion on Earth. Rain, rivers, floods, lakes, and the ocean carry away bits of soil and sand and slowly wash away the sediment. Rainfall produces four types of soil erosion: splash erosion, sheet erosion, rill erosion, and gully erosion.

Splash erosion describes the impact of a falling raindrop, which can scatter tiny soil particles as far as 0.6 meters (two feet).

Sheet erosion describes erosion caused by runoff.

Rill erosion describes erosion that takes place as runoff develops into discrete streams (rills).

Finally, gully erosion is the stage in which soil particles are transported through large channels.

The Fish River Canyon, in southern Namibia, is the largest canyon in Africa and a product of valley erosion. Over millions of years, the Fish River wore away at the hard gneiss bedrock, carving a canyon about 160 kilometers (99 miles) in length, 27 kilometers (17 miles) wide, and 550 meters (1,084 feet) deep.

The battering force of ocean waves also erodes seaside cliffs. The action of erosion can create an array of coastal landscape features. For example, erosion can bore holes that form caves. When water breaks through the back of the cave, it can create an arch. The continual pounding of waves can cause the top of the arch to fall, leaving nothing but rock columns called sea stacks. The seven remaining sea stacks of Twelve Apostles Marine National Park, in Victoria, Australia, are among the most dramatic and well-known of these features of coastal erosion.

Erosion by Wind

Erosion by Ice

Ice, usually in the form of glaciers, can erode the earth and create dramatic landforms. In frigid areas and on some mountaintops, glaciers move slowly downhill and across the land. As they move, they transport everything in their path, from tiny grains of sand to huge boulders. Rocks carried by glaciers scrape against the ground below, eroding both the ground and the rocks. In this way, glaciers grind up rocks and scrape away the soil. Moving glaciers gouge out basins and form steep-sided mountain valleys. Eroded sediment called moraine is often visible on and around glaciers.

Several times in Earth's history, vast glaciers covered parts of the Northern Hemisphere. These glacial periods are known as ice ages. Ice Age glaciers carved much of the modern northern North American and European landscape. Ice Age glaciers scoured the ground to form what are now the Finger Lakes in the U.S. state of New York, for example. They carved fjords, deep inlets along the coast of Scandinavia. The snout of a glacier eroded Cape Cod Bay, Massachusetts, U.S., and formed the recognizable fishhook shape of Cape Cod itself.

Today, in places such as Greenland and Antarctica, glaciers continue to erode the earth. Ice sheets there can be more than a mile thick, making it difficult for scientists to measure the speed and patterns of erosion. However, ice sheets do erode remarkably quickly-as much as half a centimeter (0.2 inch) every year.

Other Forces of Erosion

Factors Impacting Erosion

Some of the natural factors impacting erosion in a landscape include climate, topography, vegetation, and tectonic activity. Climate is perhaps the most influential force impacting the effect of erosion on a landscape. Climate includes precipitation and wind. Climate also includes seasonal variability, which influences the likelihood of weathered sediments being transported during a weather event such as a snowmelt, breeze, or hurricane. Topography, the shape of surface features of an area, can contribute to how erosion impacts that area. The earthen floodplains of river valleys are much more prone to erosion than rocky flood channels, which may take centuries to erode. Soft rock like chalk will erode more quickly than hard rocks like granite.

Vegetation can slow the impact of erosion. Plant roots adhere to soil and rock particles, preventing their transport during rainfall or wind events. Trees, shrubs, and other plants can even limit the impact of mass wasting events such as landslides and other natural hazards such as hurricanes. Deserts, which generally lack thick vegetation, are often the most eroded landscapes on the planet.

Finally, tectonic activity shapes the landscape itself, and thus influences the way erosion impacts an area. Tectonic uplift, for example, causes one part of the landscape to rise higher than others. In a span of about 5 million years, tectonic uplift caused the Colorado River to cut deeper and deeper into the Colorado Plateau, land in what is now the U.S. state of Arizona. It eventually formed the Grand Canyon, which is more than 1,600 meters (one mile) deep and as much as 29 kilometers (18 miles) wide in some places.

Erosion and People
Deposition, Soils, and Sediments
Eroded sediments have profoundly influenced the development of civilizations around the world. Agricultural development is often reliant on the nutrient-rich soils created by the accumulation of eroded earth. When the velocity of wind or water slows, eroded sediment is deposited in a new location. The sediment builds up in a process called sedimentation and creates fertile land. River deltas are made almost entirely of sediment that has eroded from the banks and bed of a river.

The rich delta soils of the San Joaquin and Sacramento rivers in northern California, for example, have created one of the most agriculturally productive areas in the world. Loess is an agriculturally rich sediment made almost entirely of wind-blown, eroded sediment.

The Yellow River in central China gets its name from the yellow loess blown into and suspended in its water. The fertile lands around the Yellow River have been among China's most productive for thousands of years.

Erosion is a natural process, but human activity can make it happen more quickly. Human activity altering the vegetation of an area is perhaps the biggest human factor contributing to erosion. Trees and plants hold soil in place. When people cut down forests or plow up grasses for agriculture and development, the soil is more vulnerable to washing or blowing away. Landslides become more common. Water rushes over exposed soil rather than soaking into it, causing flooding.

The rise in temperature is also quickly melting glaciers. The slower, more massive form of glacial erosion is being supplanted by the cumulative impact of rill, gully, and valley erosion. In areas downstream from glacial snouts, rapidly melting glaciers are contributing to sea level rise. The rising sea erodes beaches more quickly.

Erosion control is the process of reducing erosion by wind and water. Farmers and engineers must regularly practice erosion control. Sometimes, engineers simply install structures to physically prevent soil from being transported. Gabions are huge wireframes that hold boulders in place, for instance. Gabions are often placed near cliffs. These cliffs, often near the coast, have homes, businesses, and highways near them. When erosion by water or wind threatens to tumble the boulders toward buildings and cars, gabions protect landowners and drivers by holding the rocks in place.

Living shorelines are another form of erosion control in wetland areas. Living shorelines are constructed by placing native plants, stone, sand, and even living organisms such as oysters along wetland coasts. These plants help anchor the soil to the area, preventing erosion. By securing the land, living shorelines establish a natural habitat. They protect coastlines from powerful storm surges as well as erosion.

# data[].attributes.attachment_link.description
Erosion is the geological process in which earthen materials are worn away and transported by natural forces such as wind or water.

# data[].attributes.attachment_link.title
Geological Society - Erosion and Transport

# data[].attributes.attachment_link.description
Erosion is the process by which soil and rock particles are worn away and moved elsewhere by gravity, or by a moving transport agent - wind, water or ice. Transport refers to the processes by which the sediment is moved along - for example, pebbles rolled along a river-bed or sea shore, sand grains whipped up by the wind, salts carried in solution.

# data[].attributes.attachment_link.title
Geological Society - Deposition of Sediment

# data[].attributes.attachment_link.description
Deposition is the laying down of sediment carried by wind, water, or ice. Sediment can be transported as pebbles, sand & mud, or as salts dissolved in water. Salts may later be deposited by organic activity (e.g. as sea-shells) or by evaporation.

# data[].attributes.attachment_link.title
Geological Society - Erosion and Transport

# data[].attributes.attachment_link.description
Erosion is the process by which soil and rock particles are worn away and moved elsewhere by gravity, or by a moving transport agent - wind, water or ice. Transport refers to the processes by which the sediment is moved along - for example, pebbles rolled along a river-bed or sea shore, sand grains whipped up by the wind, salts carried in solution.

# data[].attributes.body
Weathering

# data[].attributes.attachment_link.readable_text
Weathering describes the breaking down or dissolving of rocks and minerals on the surface of the Earth. Water, ice, acids, salts, plants, animals, and changes in temperature are all agents of weathering.

Subjects

Earth Science, Geology, Geography, Physical Geography

Weathering describes the breaking down or dissolving of rocks and minerals on the surface of the Earth. Water, ice, acids, salts, plants, animals, and changes in temperature are all agents of weathering. Once a rock has been broken down, a process called erosion transports the bits of rock and mineral away. No rock on Earth is hard enough to resist the forces of weathering and erosion. Together, these processes carved landmarks such as the Grand Canyon, in the U.S. state of Arizona. This massive canyon is 446 kilometers (277 miles) long, as much as 29 kilometers (18 miles) wide, and 1,600 meters (1 mile) deep. Weathering and erosion constantly change the rocky landscape of Earth. Weathering wears away exposed surfaces over time. The length of exposure often contributes to how vulnerable a rock is to weathering. Rocks, such as lavas, that are quickly buried beneath other rocks are less vulnerable to weathering and erosion than rocks that are exposed to agents such as wind and water. As it smoothes rough, sharp rock surfaces, weathering is often the first step in the production of soils. Tiny bits of weathered minerals mix with plants, animal remains, fungi, bacteria, and other organisms. A single type of weathered rock often produces infertile soil, while weathered materials from a collection of rocks is richer in mineral diversity and contributes to more fertile soil. Soils types associated with a mixture of weathered rock include glacial till, loess, and alluvial sediments. Weathering is often divided into the processes of mechanical weathering and chemical weathering. Biological weathering, in which living or once-living organisms contribute to weathering, can be a part of both processes. Mechanical Weathering Mechanical weathering, also called physical weathering and disaggregation, causes rocks to crumble. Water, in either liquid or solid form, is often a key agent of mechanical weathering. For instance, liquid water can seep into cracks and crevices in rock. If temperatures drop low enough, the water will freeze. When water freezes, it expands. The ice then works as a wedge. It slowly widens the cracks and splits the rock. When ice melts, liquid water performs the act of erosion by carrying away the tiny rock fragments lost in the split. This specific process (the freeze-thaw cycle) is called frost weathering or cryofracturing. Temperature changes can also contribute to mechanical weathering in a process called thermal stress. Changes in temperature cause rock to expand (with heat) and contract (with cold). As this happens over and over again, the structure of the rock weakens. Over time, it crumbles. Rocky desert landscapes are particularly vulnerable to thermal stress. The outer layer of desert rocks undergo repeated stress as the temperature changes from day to night. Eventually, outer layers flake off in thin sheets, a process called exfoliation. Exfoliation contributes to the formation of bornhardts, one of the most dramatic features in landscapes formed by weathering and erosion. Bornhardts are tall, domed, isolated rocks often found in tropical areas. Sugarloaf Mountain, an iconic landmark in Rio de Janeiro, Brazil, is a bornhardt. Changes in pressure can also contribute to exfoliation due to weathering. In a process called unloading, overlying materials are removed. The underlying rocks, released from overlying pressure, can then expand. As the rock surface expands, it becomes vulnerable to fracturing in a process called sheeting. Another type of mechanical weathering occurs when clay or other materials near rock absorb water. Clay, more porous than rock, can swell with water, weathering the surrounding, harder rock. Salt also works to weather rock in a process called haloclasty. Saltwater sometimes gets into the cracks and pores of rock. If the saltwater evaporates, salt crystals are left behind. As the crystals grow, they put pressure on the rock, slowly breaking it apart. Honeycomb weathering is associated with haloclasty. As its name implies, honeycomb weathering describes rock formations with hundreds or even thousands of pits formed by the growth of salt crystals. Honeycomb weathering is common in coastal areas, where sea sprays constantly force rocks to interact with salts. Haloclasty is not limited to coastal landscapes. Salt upwelling, the geologic process in which underground salt domes expand, can contribute to weathering of the overlying rock. Structures in the ancient city of Petra, Jordan, were made unstable and often collapsed due to salt upwelling from the ground below. Plants and animals can be agents of mechanical weathering. The seed of a tree may sprout in soil that has collected in a cracked rock. As the roots grow, they widen the cracks, eventually breaking the rock into pieces. Over time, trees can break apart even large rocks. Even small plants, such as mosses, can enlarge tiny cracks as they grow. Animals that tunnel underground, such as moles and prairie dogs, also work to break apart rock and soil. Other animals dig and trample rock aboveground, causing rock to slowly crumble. Chemical Weathering Chemical weathering changes the molecular structure of rocks and soil. For instance, carbon dioxide from the air or soil sometimes combines with water in a process called carbonation. This produces a weak acid, called carbonic acid, that can dissolve rock. Carbonic acid is especially effective at dissolving limestone. When carbonic acid seeps through limestone underground, it can open up huge cracks or hollow out vast networks of caves. Carlsbad Caverns National Park, in the U.S. state of New Mexico, includes more than 119 limestone caves created by weathering and erosion. The largest is called the Big Room. With an area of about 33,210 square meters (357,469 square feet), the Big Room is the size of six football fields. Sometimes, chemical weathering dissolves large portions of limestone or other rock on the surface of the Earth to form a landscape called karst. In these areas, the surface rock is pockmarked with holes, sinkholes, and caves. One of the world's most spectacular examples of karst is Shilin, or the Stone Forest, near Kunming, China. Hundreds of slender, sharp towers of weathered limestone rise from the landscape. Another type of chemical weathering works on rocks that contain iron. These rocks turn to rust in a process called oxidation. Rust is a compound created by the interaction of oxygen and iron in the presence of water. As rust expands, it weakens rock and helps break it apart. Hydration is a form of chemical weathering in which the chemical bonds of the mineral are changed as it interacts with water. One instance of hydration occurs as the mineral anhydrite reacts with groundwater. The water transforms anhydrite into gypsum, one of the most common minerals on Earth. Another familiar form of chemical weathering is hydrolysis. In the process of hydrolysis, a new solution (a mixture of two or more substances) is formed as chemicals in rock interact with water. In many rocks, for example, sodium minerals interact with water to form a saltwater solution. Hydration and hydrolysis contribute to flared slopes, another dramatic example of a landscape formed by weathering and erosion. Flared slopes are concave rock formations sometimes nicknamed "wave rocks." Their c-shape is largely a result of subsurface weathering, in which hydration and hydrolysis wear away rocks beneath the landscape's surface. Living or once-living organisms can also be agents of chemical weathering. The decaying remains of plants and some fungi form carbonic acid, which can weaken and dissolve rock. Some bacteria can weather rock in order to access nutrients such as magnesium or potassium. Clay minerals, including quartz, are among the most common byproducts of chemical weathering. Clays make up about 40% of the chemicals in all sedimentary rocks on Earth. Weathering and People Weathering is a natural process, but human activities can speed it up. For example, certain kinds of air pollution increase the rate of weathering. Burning coal, natural gas, and petroleum releases chemicals such as nitrogen oxide and sulfur dioxide into the atmosphere. When these chemicals combine with sunlight and moisture, they change into acids. They then fall back to Earth as acid rain. Acid rain rapidly weathers limestone, marble, and other kinds of stone. The effects of acid rain can often be seen on gravestones, making names and other inscriptions impossible to read. Acid rain has also damaged many historic buildings and monuments. For example, at 71 meters (233 feet) tall, the Leshan Giant Buddha at Mount Emei, China is the world's largest statue of the Buddha. It was carved 1,300 years ago and sat unharmed for centuries. An innovative drainage system mitigates the natural process of erosion. But in recent years, acid rain has turned the statue's nose black and made some of its hair crumble and fall.

Media Credits

The audio, illustrations, photos, and videos are credited beneath the media asset, except for promotional images, which generally link to another page that contains the media credit. The Rights Holder for media is the person or group credited.

Producer

National Geographic Society

other

Last Updated

October 19, 2023

For information on user permissions, please read our Terms of Service. If you have questions about how to cite anything on our website in your project or classroom presentation, please contact your teacher. They will best know the preferred format. When you reach out to them, you will need the page title, URL, and the date you accessed the resource.

Media

If a media asset is downloadable, a download button appears in the corner of the media viewer. If no button appears, you cannot download or save the media.

Text

Text on this page is printable and can be used according to our Terms of Service.

Interactives

Any interactives on this page can only be played while you are visiting our website. You cannot download interactives.

# data[].attributes.attachment_link.description
Weathering describes the breaking down or dissolving of rocks and minerals on the surface of the Earth. Water, ice, acids, salts, plants, animals, and changes in temperature are all agents of weathering.

# data[].attributes.body
Weathering

# data[].attributes.attachment_link.readable_text
Weathering

Weathering is the breakdown of rocks at the Earth's surface, by the action of rainwater, extremes of temperature, and biological activity. It does not involve the removal of rock material.

There are three types of weathering, physical, chemical and biological.

# data[].attributes.attachment_link.description
Weathering Weathering is the breakdown of rocks at the Earth's surface, by the action of rainwater, extremes of temperature, and biological activity. It does not involve the removal of rock material. There are three types of weathering, physical, chemical and biological.

# data[].attributes.body
Plate tectonics/Volcanic Uplift

# data[].attributes.attachment_link.readable_text
There are a few handfuls of major plates and dozens of smaller, or minor, plates. Six of the majors are named for the continents embedded within them, such as the North American, African, and Antarctic plates. Though smaller in size, the minors are no less important when it comes to shaping the Earth. The tiny Juan de Fuca plate is largely responsible for the volcanoes that dot the Pacific Northwest of the United States.

The plates make up Earth's outer shell, called the lithosphere. (This includes the crust and uppermost part of the mantle.) Churning currents in the molten rocks below propel them along like a jumble of conveyor belts in disrepair. Most geologic activity stems from the interplay where the plates meet or divide.

The movement of the plates creates three types of tectonic boundaries: convergent, where plates move into one another; divergent, where plates move apart; and transform, where plates move sideways in relation to each other.

They move at a rate of one to two inches (three to five centimeters) per year.

Convergent Boundaries

Where plates serving landmasses collide, the crust crumples and buckles into mountain ranges. India and Asia crashed about 55 million years ago, slowly giving rise to the Himalaya, the highest mountain system on Earth. As the mash-up continues, the mountains get higher. Mount Everest, the highest point on Earth, may be a tiny bit taller tomorrow than it is today.

These convergent boundaries also occur where a plate of ocean dives, in a process called subduction, under a landmass. As the overlying plate lifts up, it also forms mountain ranges. In addition, the diving plate melts and is often spewed out in volcanic eruptions such as those that formed some of the mountains in the Andes of South America.

At ocean-ocean convergences, one plate usually dives beneath the other, forming deep trenches like the Mariana Trench in the North Pacific Ocean, the deepest point on Earth. These types of collisions can also lead to underwater volcanoes that eventually build up into island arcs like Japan.

At divergent boundaries in the oceans, magma from deep in the Earth's mantle rises toward the surface and pushes apart two or more plates. Mountains and volcanoes rise along the seam. The process renews the ocean floor and widens the giant basins. A single mid-ocean ridge system connects the world's oceans, making the ridge the longest mountain range in the world.

On land, giant troughs such as the Great Rift Valley in Africa form where plates are tugged apart. If the plates there continue to diverge, millions of years from now eastern Africa will split from the continent to form a new landmass. A mid-ocean ridge would then mark the boundary between the plates.

The San Andreas Fault in California is an example of a transform boundary, where two plates grind past each other along what are called strike-slip faults. These boundaries don't produce spectacular features like mountains or oceans, but the halting motion often triggers large earthquakes, such as the 1906 one that devastated San Francisco.

# data[].attributes.attachment_link.description
There are a few handfuls of major plates and dozens of smaller, or minor, plates. Six of the majors are named for the continents embedded within them, such as the North American, African, and Antarctic plates. Though smaller in size, the minors are no less important when it comes to shaping the Earth.