# data[].attributes.body
plug -6 to the x and then add 4 to the y

# data[].attributes.body
To solve the expression First we need to asignd the coresponding number (-8)-6^2/(3)4 then put it in the calculator and solve it for the right answer.

# data[].attributes.headline
plug in -6 &4 multiply -8x-6 multiply 3x4 then didvide 

# data[].attributes.subject
plug in -6 &4 multiply -8x-6 multiply 3x4 then didvide 

# data[].attributes.body
First write down the problem.(or read it) Then you rewrite them down the correct way as it explains it. Then you just put it down on the calculator and it gives you the right answes.

# data[].attributes.body
change x for -6 and y-

# data[].attributes.body
plug -6 to x and then put 4 to y

# data[].attributes.body
I would drop down some info and the variables I need to plug in put them in parenthesis and put them in the calculater, and finally click enter to get my answer

# data[].attributes.body
Plug in the numbers into the variables and type in the equation into the calculator

# data[].attributes.body
you would apply -6 where x is and apply 4 where y is. then you would times -6*-6 equals 36 then times it by -8 equals-288 .After that do the bottom and do 3 times 4 and get 12. then divide -288 by 12 equals -24 that is your ansewer.

# data[].attributes.body
1. change X for -6 and Y-4
and then put all numbers together and pug in the calculator

# data[].attributes.body
first i would substitute -6 for x and 4 for y then type it in my calculator and my answer would pop up

# data[].attributes.body
put -6 to x and then put 4 to y

# data[].attributes.body
I would plug in the numbers where they need to go and then solve the answer

# data[].attributes.body
i would write down the equation down with the negative 8 and for the x i would replace as the negative 6 but i will put in parenthesis then write the rest of the equation then when i write the 3 i will replace  the y for the 4 and after i put the 4 i would solve the entire equation.

# data[].attributes.body
I would plug in -6 and 4 then multiply -8*-6 then multiply 3*4 after you multiply both of those you divide to get -8/3

# data[].attributes.body
i would add the numbers after i would multiply after i get the answer ill multiply 3 and -6 and when i get the answer to that ill divide 48 over -18 and sas there you go

# data[].attributes.body
you would put -8 and change x to -6  and put 2 as an exponent and then put 3 and change y to 4 then you solve it

# data[].attributes.body
i would write down the equation down with the negative 8 and for the x i would replace as the negative 6 but i will put in parenthesis then write the rest of the equation then when i write the 3 i will replace the y for the 4 and after i put the 4 i would solve the entire equation.

# data[].attributes.body
first change the x an y for -6 and 4 then put all the numbers together and plug in the calculator

# data[].attributes.body
1. plug the numbers in with corresponding variables -8(-6)^2/3(4) and you will get the answer.

# data[].attributes.body
first i would plug in the numbers then multiply -8*-6 and then ill get 48 and then ill multiply 3*-6 and get -18 and  now you need to divide 48 over -18 and you will get -8/3.

# data[].attributes.body
first i will plug the  assign number to each letter than it will be -8(-6)^2/3(4) than press enter it will be -384.

# data[].attributes.body
First i would Plug in the numbers then multiply -8*-6 and thwn ill get 48 and then ill mutiply 3*-6 and get -18 and now u need to divide 48 over -18 and you will get -8/3.