# data[].attributes.body
12.06.20

# data[].attributes.body
The finished look!
Tidied up and stray hairs and fixed with hairspray with a firm hold. 04.06.20

# data[].attributes.body
I decided to go for something soft and chic. I took a bit of hair at the crown of the head and back combed them pinned at the back. I then took two sections of hair from the front of the head at the left side, leaving bits of hair to frame the face. I start to twist the two sections. Every time I bring the bottom section up to twist I pick up extra hair lifting it all up. I make sure this twist is at the level of the pinned hair at the back. When I ge to the right side again I leave a bit of hair to frame the face and hold the twist with a bobble. I then gently pull the twist to soften the look, and pint the twist where I want it to be behind the head. I then bring the rest of the twist round and tuck it under the twist I’ve just secured. For the hair I left I made soft curls with a curling wand. 04.06.20

# data[].attributes.body
Before picture. 04.06.20

# data[].attributes.headline
Long Graduation with Forward Graduation Pt 3

# data[].attributes.subject
Long Graduation with Forward Graduation Pt 3

# data[].attributes.body
The finished look. Blow dried the hair using a smoothing technique then finished using straighteners. 03.06.20

# data[].attributes.headline
Long graduation with forward graduation Pt 2

# data[].attributes.subject
Long graduation with forward graduation Pt 2

# data[].attributes.body
When setting my guideline I got a small section of hair from the front of the head from the middle parting, making sure I took a piece of hair from each side. When working on the left I swooped the hair forward turning my finger up, find my guideline and cut. I do this until hair falls from my hand. I do the same on the right side but swoop the hair with my fingers pointing down. When I am finished I checked my balance. This is my forward graduation finished.
I then begin on my profile. I take a thin bit of hair on either side of the parting starting from the front of the rad, using my original guideline I cut at 180 degree, I continue this until I reach the crown of the head. Now I section up the sides of the head and begin to work in orange segments for the long graduation. Starting from the middle I bring up the hair at 135 degree angle from the head. Before cutting I turn my hand straight then cut. I work around the back in these segments walking around the head as I go. For the sides I use the same technique. But I leave a bit of length at the bottom so I don’t cut into my forward graduation. I cross check by lifting sections up at the same angle I cut but section across the head. 03.06.20

# data[].attributes.headline
Long Graduation with Forward Graduation Pt 1

# data[].attributes.subject
Long Graduation with Forward Graduation Pt 1

# data[].attributes.body
Before the cut. 03.06.20

# data[].attributes.body
After letting the pin curls cool, I then did a little hair spray then started to release the curls. I brushed them out to style. For the Victory Rolls I got a section of hair from the side parting, to the crown then down towards the ear. I back combed the section until it stood up on its own. Then smoother the hair with a brush. Then using two fingers curled the hair in. So you couldn’t see through the roll I smoothed the roll down and the back of the head and secured with clips. I did the same on each side, then finished with hair spray. 14.05.20

# data[].attributes.body
I sectioned the hair and flat pin curled. I did one row clockwise, one row anti clockwise moving up the head for movement. At the front I have done to pin curls standing to frame the face. I did not have pin curl clips at home so had to make do with what I had! 14.05.20

# data[].attributes.body
Before styling.14.05.20

# data[].attributes.body
Left the bleach to develop for 30 mins as stated in the manufacturers instructions. During this time I checked on the colour to make sure the desired results had been made. Then washed out thoroughly, carefully taking the foils out then conditioned. Smooth blow dry and straighteners. Cut was not apart of the service. 04.05.20

# data[].attributes.body
Started on the middle section from the back moving forward, then the side from the bottom, working up to the top. Section a cm of hair each time, then halved it, then wove the hair to be bleached. Using a pin comb I folded my foil over the pin and placed it right under the root. Applied the bleach a couple of millimetres from the root and worked my way down. Used the pin comb to fold the foil up, on the sides and a little bend at the top to prevent product leakage. Never flattened the foil as peroxide expands and could result in the product leaking. 04.05.20

# data[].attributes.body
T-section and what I used. 20 volume (6% peroxide) and bleach powder. Used 1 part powder to 2 part peroxide as specified in the manufacturers instructions. Gloves and apron worn throughout service. Hair had a depth of 5 (medium brown) so used 20 vol to lift 2 levels. 04.05.20

# data[].attributes.body
Before image of T-section foils. 4.05.20

# data[].attributes.body
Took a section of hair on top of the head, no longer than my finger. Tied the rest of the hair in a side pony tail. I separated the the hair into three sections and curled each of them using curling tongs. Secured each curl and left to cool. Whilst cooling I made the pony tail into a bun. When releasing the curls I combed the wave shape holding down with my fingers. Each wave was pinned to secure. When I was happy with the shape I hair-sprayed and removed the clips.
26.04.20

# data[].attributes.body
Used conditioner to act as dye. Gloves and apron worn as PPE. Sectioned using ‘hot cross bun’ and worked through each section in diagonal layers. Thin enough to see through to make sure there was full coverage. Separated the hair using the tail end of the application brush, made sure not to overload the brush with product during application. 22.04.20

# data[].attributes.body
Finished result! Smoothing blow dry and dressed with straighteners (35 minutes). 01.04.20

# data[].attributes.body
One length cut put in (23 minutes)then 180 degree long graduation (20 minutes). Cross checked (seen in this photo). Uniform worn during service and followed health and safety throughout. 01.04.20

# data[].attributes.body
Before image of cut and blow dry. 01.04.20

# data[].attributes.body
Full head of permanent colour using Koleston Perfect and 4%/13 vol peroxide. 1 part to 1 part. 11.02.20

# data[].attributes.body
One length cut (above shoulder), blow dry and style with straighteners. 04.02.20

# data[].attributes.body
One length cut on naturally curly hair. 10.02.20

# data[].attributes.body
Wash, one length cut and blow dry. Before and after. 21.01.20

# data[].attributes.body
Wash, blow dry and style using curling wand. 03.12.19

# data[].attributes.body
Wash, penetrating conditioning treatment and smoothing blow dry. 19.11.19