# data[].attributes.headline
nelson , dicky, hajit, leslie, cy, wen hui

# data[].attributes.subject
nelson , dicky, hajit, leslie, cy, wen hui

# data[].attributes.body
1) Which type of alarm zone should the fence be allocated? Explain.
Perimeter Zone.
An alarm is triggered when this zone is violated.

2) Which type of alarm should the bed room door be allocated? Explain.
Interior Zone.
Allow free movement within the protected area without initiating an alarm.

3) If the owner is at home, what arming mode should the owner use? Explain.
Arming home. Only special zones or perimeter will be activated.

4) If the owner is leaving the house, what arming mode should the owner use? Explain.
Arming away. All zones will be activated.

5) What type of sensors should be used for the main doors? Explain.
Magnetic Contact. To monitor the door status. When normally close or normally open.

: door and window sensor that functions using an internal reed switch in conjunction with a magnet.

: Easy use and enroll system

# data[].attributes.body
1) Perimeter Zone - alarm is triggered when it is violated even though in arming "HOME"

2) Interior zone - System will be armed in "HOME" mode when the user is at home to allow
free movement without triggering the interior alarm

3) Arming "HOME" Mode

4) Arming "Away" Mode

5) Magnetic wired Contact

# data[].attributes.body
1) Fence Alarm System (24h),fence-mounted intrusion detection system for perimeter fences. The fence detection cable uses accelerometers to detect fence vibrations generated by intrusion attempts made by cutting, climbing or lifting the fence
2) Door alarm sensor, The purpose of a door sensor is to trigger an alarm. These sensors help the first responders with an investigation by knowing points of entry or sensor activity
3) Arming home mode,  only  perimeter  or  special  zones will be activated.
4) Arming away, all zones will be activated
5) Door alarm sensor, The purpose of a door sensor is to trigger an alarm. These sensors help the first responders with an investigation by knowing points of entry or sensor activity

# data[].attributes.body
Allow free movement within the protected area without initiating an alarm.

# data[].attributes.body
1.      perimeter zone: Fence
Trigger when violated during arm.

2.      Interior zone :Bedroom back door
To be armed in the home mode.

3.      Arming home
assign as special zone or perimeter will be activated

4.      Arming away
All zone will be activated

5.      Wired door contact

# data[].attributes.body
1) The Fence would be using the Outdoor Intrusion Detection System.It is to protect the perimeter of the protected area and it is usually considered as the first layer of protection.
2) The bedroom door would be using the Indoor Intrusion Detection system.It is placed  indoors  in  residential  and  commercial  premises  to

detect any intruder. It consists of indoor sensors, controllers and an output actuator.
3)The owner should be using the "Arming Home" mode.This is used to arm the perimeter of the house as the owner is at home.It also allows

free movement

within the protected area

without initiating an

alarm.
4)The owner leaving the house should be using the "Arming Away" with an "Exit Delay" to ensure that the user gets out of the house before all the zones gets activated.
5) The main door should use a wired magnetic contact which is used to monitor the status of the door .Some status of the main door would be , Door Closed, Door Open, Door Forced Open and Door Left Open.

# data[].attributes.body
2)