# data[].attributes.body
1. I used a fast shutter speed, as it was sunny and I didn't want the photo to get overexposed.

2. I used a medium aperture, as I wanted to capture a decent amount of the background, however, I also wanted to dock to be the focal point.

3. I used framing to draw attention to the bridge. I did this by purposely placing it in the middle of the image.

4. I made the image a bit darker because it was originally brighter than I wanted.

# data[].attributes.body
1. I used a relatively fast shutter speed, because it was bright out that morning, and i didn't want the photo to get over-exposed.

2. I used a small aperture, because I wanted the whole photo to be in focus, driftwood, beach grass & all

3. I used the rule of thirds to first draw attention to the driftwood, then left the rest of the portrait to the vegetation. the wood isn't necessarily the focal point; it gives room for the rest of the photo to be appreciated, that being the serene grass of Crown Beach.

4. I significantly raised the brightness and saturation of the colors in photoshop to make the colors more visible, and pop out more in the photo. the colors you see would in actuality be a lot duller in person.

# data[].attributes.body
1. I used a pretty fast shutter speed because I wanted to take as many pictures of Ken as possible while he was climbing the ladder, only a few turned out nice.

2. in my picture, I used a relatively smaller aperture because I wanted a more dark, and mysterious picture. I still let some light get in to show my subject.

3. I used the rules of composition by using the viewpoint rule. I took this photo facing up toward Ken and it showed in detail how he was climbing up a ladder towards to light.

4. I edited my photo in Photoshop by adjusting the brightness and contrast. I wanted the picture to be less bright and a bit darker so the main focus was the light at the top and Ken.

# data[].attributes.headline
Didier Gutierrez-Barajas-Legends Of Rare Design 

# data[].attributes.subject
Didier Gutierrez-Barajas-Legends Of Rare Design 

# data[].attributes.body
1. I used a fast shutter speed, because it was around early in the morning, also didn't want the photo to look a little weird.

2. Small aperture because I wanted the whole photo to be the main focus for viewers to have an easy thing to grasp on.

3. I used framing because of the grass, rocks, and the shade. There is a combination between color and and grey black pebble rocks. But if you were to view this photo your first eye glance will be the amazing art piece.

4. I edited my photo in photo shop by adjusting the color balance between the rocks and art piece, and also there was a big Styrofoam log blacking the art piece so we photoshopped to to blend in with the grass.

# data[].attributes.body
1. I used a fast shutter speed such as 1/100 because it was sunny out and I didn't want the picture to be bright and, my subject was only lying down.

2. I used a low f-stop. This is because I only had one subject and, I didn't want to let much light into my photo.

3. For my rules of composition, I used viewpoint to mainly capture my main subject, give him the most attention in the photo, and ignore the cars in the background

4. I mainly raised the clarity and lighting in when I was editing. This was because in my original photo, it was very grainy and all unbalanced with the lighting.

# data[].attributes.body
1. I used a fast shutter speed to keep the image still and eliminate any unnecessary motion blur.

2. I used a large aperture because I really wanted the main subject of the photo to be in focus and to show the depth.

3. I used the rules of competition such as rule of thirds to draw attention to the subject and bring focus to the volleyball, especially by keeping it closer to the camera than everything else.

4. In photoshop the main changes I made were adjusting the exposure, the contrast, and a little bit of the coloring to make the photo pop because the original photo is a lot more dark and dull.

# data[].attributes.body
1. I used a fast shutter speed of 1/100 so I wouldn't catch movement in the background from the teachers.

2. I used a medium aperture of f/5.6 to have a clear image of the subject from a close distance and a semi-blurry background.

3. I used leading lines, framing, and focus to really make Thomas pop. The tree and building all point to Thomas, aswell as framing my photo to get rid of any lines not pointing to him, and making the background not the focus of the photograph.

4. In Photoshop, I made the all-around photo brighter using my knowledge of vibrance, especially Thomas' orange sweater. I made it brighter to make sure that the viewer knew for sure what the subject was.

# data[].attributes.body
1. I used a slowish shutter speed since Cruz is a little blurry, but the background is very clear.

2. I used a small aperture to help capture the whole background. I wanted to be able to capture the city and the graffiti with good quality in the photo.

3. The rules of composition I used in this photo is framing. A you can see in the photo there is like a big frame around Cruz bringing focus to him as the subject.

4. In photoshop I masked the city background such as color balance, brightness, exposure, vibrance and saturation to make it more darker to stand out because before it was very bright. Then I masked the graffiti and used brightness and color balance to make it more bright and stand out more.

# data[].attributes.body
1. For my image, I used a fast shutter speed as I wanted the subject to be seen clearly without anything blurred.

2. I used a small aperture as I wanted everything to be seen through the depth of field.

3. I used a lot of contrast in my image as I made the image of the subject in the mirror brighter than the one outside it. I also used framing to draw the viewer's attention to the subject inside the mirror.

4. My image to begin with was very dark, so in Photoshop I brightened the whole image. I also used the object selection tool to brighten the subject and the mirror to create contrast from the one outside it.

# data[].attributes.body
1. I used a fast shutter speed because I didn't want any motion blur in my picture. I want it to be a still photo.

2. I used a wide aperture because these pictures were taken during the night so I needed as much light to go into the lens as possible. I didn't want my picture to be dark.

3. I used depth to emphasize my subject. Also colour plays a part in emphasizing my subject as well as the composition between light and dark.

4. In photoshop I made changes to the exposure and vibrance. My original photos were dark and had no life to them. So I decided to play around in photoshops to make my photograph not only brighter in lightening but also more vibrant and had some feeling to it.

# data[].attributes.body
1. I used fast shutter speed because it was very bright and sunny out and I did not want the photo to get over exposed.

2. I used a larger aperture to create a sharer image and to help include the background.

3. I used the rule of thirds to emphasize my subject. I also used depth with the subject being in front of the garden area which helped to emphasize my subject.

4. I edited my photo in photoshop with multiple edits. Firstly, I made it black and white as I got inspiration from the artist I picked. I cropped the photo which helped the symmetry and balance in the photo. Lastly, I used brightness and contrast to emphasize the subject.

# data[].attributes.body
1. I used a fast shutter speed to capture the image quickly. Even though my original image was much darker I still was able to capture a very quick moment

2. I used a low f-stop to make sure the rider was in focus. I wanted the focus to be on the rider because he is my subject.

3. The rider is on the right 3rd of the image. So is the fox symbol. The markers are on the left 3rd of the image. The bottom berm is on the bottom 3rd of the image.

4. I made the photo much brighter and the colors pop more. The original image was dark and grey. I made it so that this new image is much bright and the grass in the back pops more.

# data[].attributes.body
1. I used a fast shutter speed, because I wanted to get a crisp photo

2. Small, I was outside

3. I used contrast through lighting.

4. I brightened the image up a smidge, and cropped it too.

# data[].attributes.body
1. I used a lower shutter speed to capture this image and i set it lower so less inteferance from the sun.

2. I used a shallower background to empahzise the blossom. (around F 3.0)

3. I used the viewpoint rule of composition so that it would give you the effect that you were up close with the cherry blossom.

4. In photoshop I made it brighter because it was hard to see the details.

# data[].attributes.body
1. I used a fast shutter speed as I did not want my photo to capture any motion and blurs. Also because it was pretty sunny outside.

2. I used a bigger aperture as I wanted not only for the shoes to be shown clearly but also wanted to capture the background such as the leaves and the blue house.

3. For rules pf composition, I used mainly viewpoint to draw attention to my subject. I used viewpoint by getting fairly close to the subject and taking the photo from a side angle to really be able to capture the entirety go the subject.

4. The major changes I made in photoshop was the exposure . In my photo I wanted the red on the shoes to really pop and stand out. I also wanted the green bushes to pop out . Was able to do this by making the exposure higher through the use of photoshop.

# data[].attributes.body
1. I used a really slow shutter speed because I wanted light to be my subject and a slow shutter speed makes light appear as dashes.

2. In this picture I used an aperture that wasn't too high or low. I wanted everything to be visible, but I was shooting from behind a fence, so I didnt want the fence to be too visible.

3. I definitely use a lot of leading lines. I used the car lights to point to the rest of the city but the lines themselves are also meant to be a focal point.

4. I edited my photo by turning up the saturation, turning down the brightness, and turning up the contrast. I chose these edits so that the lights would stand out more. I wanted the lights to look surreal so I had to make them really pop.

# data[].attributes.headline
Marianist Stairs - Brenda Fuentes-Juarez

# data[].attributes.subject
Marianist Stairs - Brenda Fuentes-Juarez

# data[].attributes.body
1. I used a faster shutter speed in order to keep the light from the window coming in and making Nathalee too light.

2. In this picture I used an aperature that was in between. I wanted everything to be visible but to not distract from my subject which is Nathalee.

3. I use viewpoint this picture represents Nathalee coming down the stairs.

4. I edited my picture by making the background such as the windows and posters more blurry. I didnt want these thigns to distract from Nathalee standing in the middle of the stairs.

# data[].attributes.body
!. I used a fast shutter speed catch the leaves moving.

2.I used a smaller aperture so I can get a great depth of field, with more of the image in focus.

3.The rule of composition I used is depth.I used depth to draw attention to the flower on the tree

4.The changesI made is by putting the pink color balance a little bit higher to make the color of the flower pop out more. I also moved the hue a little bit higher and saturation slightly lower.

# data[].attributes.body
1. I used a fast shutter speed because the sunset was very bright and I didnt want it to get over exposed.

2. I used a medium aperture, I wanted the people in the backround to look like shadows so thats why i used the medium aperture, to get more of the backround.

3. I used contrast to attract more focus to the bright oramge backround.

4. I made the Image darker to increase the lighting of the sunset and to make the people look like figures

# data[].attributes.body
1: I used a fast shutter speed because of the bright light outside

2: I used a small aperture to get a more blurred background

3: I used depth to put more emphasis on the individual blades of grass

4: I saturated the image more and took away some shadow so now the grass looks very colorful and the ground that the grass is in

# data[].attributes.body
1. I used a fast shutter speed because I wanted originally the photo to be extremely clear with no blur.

2. I used a small aperture because it's such a small photo I wanted the entire photo to be in focus so you could see the landscape.

3. I used leading lines and framing for my photo. The original photo was framed in between 2 poles that is what the two dark lines are they led up to the focus of the photo aka the crow.

4. I darkened the photo, accented certain colors, made it a bit grainy, added a blue silhouette around the crow.

# data[].attributes.body
1. I used a fast shutter speed because I wanted to capture the photo itself instead of in motion.

2. In my picture, I used a large aperture to capture the whole image and the leading lines leading the eye to the center of the focus.

3. I used the rules of composition by having the locker poster lead to Brenda and Natalie's faces which play the role of leading lines.

4. In Photoshop I blurred the background because I didn't want that to take the main point of the image away. I wanted the leading line to show.

# data[].attributes.body
1. I used a low shutter speed since there wasn't much sun out.

2. I used a low aperture because I wanted my subject to stay as the key focal point, which is Andrea.

3. I used leading lines to catch the person's eye and lead them to a focal point.

4. Some changes I made to the picture were taking away all the leaves on the floor and taking the pipe out that was in the back.

# data[].attributes.body
1. I used a fast shutter speed because my hand was quite shaky during my photoshoot.

2. I used a larger aperture because I wanted to focus only the flower.

3. For rules of composition, I shot this picture at an overhead viewpoint to avoid distracting background elements.

4. In photoshop, I darkened the background and brightened the flower. I also centered the image.

# data[].attributes.body
1. I used a faster shutter speed so that the photo wouldn’t be too bright because it was very sunny outside.  Because of this, the photo is less exposed and more dark.

2. I used a large aperture because I wanted there to be different depths of field.  This caused many of the leaves and background fence in the photo to be blurry, whereas some leaves and the red berry were clear and in focus.

3. I used the framing technique by positioning the camera so that the red berry would be framed by the leaves.  I also liked how the other berries in the photo were green and the one focal point of the photo (the red berry) was red, which provided a nice color contrast and made the subject stand out.

4. The photo was initially more dull, so I increased the saturation and the brightness so that the photo would be less dark and more bright.  I also put a mask on the red berry and increased its saturation, so it would stand out more and be more vibrant.

# data[].attributes.attachment_link.title
PNG Poisonous Berry. Nicole McClure .png

# data[].attributes.body
1/ i used a fast shutter speed due to the sun. i also used a fast shutter speed because i didn't want us overexposed .

2/ i used a lower aperture because i wanted the background to be more dark. there was still light in the main focus on the flower.

3/ i used viewpoint for my rules of compositions so you can get a closer look of the flower.

4/ the changes i made in photoshop was making the flower more bright then the rest of the background and to male it look more detailed

# data[].attributes.body
1. I used fast shutter speed to capture the flower without any motion from the wind.

2. I used a low aperture to capture the outdoor light, without over saturating the picture while still capturing the colors I the image.

3. I used exclusion to make sure that the flower was the focal point of the picture. I also made sure to cut out the tangent line.

4. I slightly enhance the colors of the picot but nothing else besides that.

# data[].attributes.body
1) I used a faster shutter speed because of the sunlight and so that the photo would not be overexposed.

2) I used a larger aperture with a smaller number to capture the whole view of outside my window.

3) I used to rules of composition by making sure the tree was more to the side but still a big part of the photo which can show the rule of symmetrical balance.

4) In photoshop I made the photo itself darker and brightened the red parts on the tree to make them stand out more. I made the leaves darker to also help the red stand out more.

# data[].attributes.body
1. I used fast shutter speed to capture San Francisco still and not detect any motion that may have been made from me moving the camera

2. I used a low aperture because I took the picture in daylight (it looks dark because of photoshop edits) and I wanted everything in focus.

3. I used leading lines to draw attention to my subject because the puddles in the mud and the bay lead toward the focal point of San Francisco.

4. In photoshop I changed the saturation and hue of the photo to made the photo more vibrant and have a darker aura with a dark blueish purple background, this made it seem like the photo was taken at night but really it was taken in the light of day.

# data[].attributes.body
1. I used a fast shutter speed because I didn't want anything except the subject to be highlighted.

2. I used a small aperture because there isn't really a defined fore, middle, or background.

3. I used contrast to clearly highlight the subject. I also used the framing created by the window that moves the focus to the flowers.

4. In photoshop, I made the image more colorful to better reflect the contrast between the dreary inside and the bright outside

# data[].attributes.body
1. I decided to use a fast shutter speed. This was to minimize the blur of the photo and the blur of water movement and the wind that was blowing at the time.

2. I used a medium aperture. This was an evening photo, so I wanted to keep the lighting to a slight minimum, but lenient enough to allow some color to pop.

3. I used framing to draw attention to the river, the tree in this image being a border that makes the viewer turn to the middle of the photo to notice the water and its vibrancy.

4. I changed the hues and saturation of mostly the blue and cyan colors as that is what would allow for a more attention calling feel to the water. Brightness and contrast would allow for some more pop but also clear separation between the items around the subject (I.e the grass and tree).