# data[].attributes.headline
Think You're Cut Out for Doing Plumbing? Take This Quiz

# data[].attributes.subject
Think You're Cut Out for Doing Plumbing? Take This Quiz

# data[].attributes.attachment_link.readable_text
Everyone already have an image in their mind of how their dream bathroom will look like. But, no matter what kind of bathroom you might want to have, the cost of the project is one of the things you need to consider.

The average cost of bathroom fitting in the UK for a new suite in standard-sized room of around 9 square meters will range from £2,500 up to £7,000. Installation of a typical bathroom in a small room measuring 4 square meters or less can cost you £1,500 to £5,000 when using a reliable plumbing company.

Meanwhile, new luxury fitted bathrooms that measures more than 10 square meters will cost you a minimum of £4,000 and this can go as high as £15,000 or even more. Take note that these approximate costs don't include the extras required for the job just yet.

As far as new bathrooms are concerned, there are people who prefer complete bathroom renovation. There are also others who simply wish to install a shower cubicle in place of a bath or maybe only a bath panel will be fitted, a job that is comparatively smaller. Again, no matter what your idea of the perfect bathroom may be, everything will be your personal choice. However, at the end of the day, you would surely want to see a completed job you can proudly show off.

Newly fitted bathrooms come in a variety of sizes and shapes. But, all of them pretty much share similar fixtures expected to be found in any bathroom. The only difference lies in the finish and quality of the accessories used.

Factors That Affect the Costs of Bathroom Fitting

Here are some of the factors affecting the costs of fitting a bathroom in the UK:

The cost of a tap can be anywhere between £20 and £300 or higher.

Reconfiguration or structural work

This involves the need to build or knock through walls. Take note that changes in the structure, alterations to the shared drains, and changes in the use of a specific room such as transforming a box room into a bathroom will probably need a building warrant. If this is the case, the cost for warrant applications and drawings must also be taken into consideration.

Positional changes to sanitary wear

This kind of changes can result in alternations to drains or pipework.

Bigger rooms mean that more areas need to be covered or tiled although working in these rooms may be easier for the installers.

Just like any profession or specialization, more skills and greater experience will cost you more.

At the end of the day, it is easy to see that the price you can expect to pay when fitting a bathroom in the UK will depend on a variety of factors. So, before you hire any company, don't forget to consider these things so you can plan your budget accordingly and ensure that you don't end up breaking the bank.

source https://www.ketteringpiperightplumbing.co.uk/blog/how-much-does-a-bathroom-fitting-cost-uk/

Have you always wanted to have a wet room but you are unsure if this will suit your home?

Wet rooms have now become very in demand as they work to add great value to UK homes. But, how much would it cost you to install a wet room anyway?

Cost of Wet Room Installation

Wet rooms are rooms that are completely waterproofed. These are built and designed to prevent the escape of water that can cause damage. Considering this, it can take a lot of work to build a wet room on the underlying structure and complete waterproofing is necessary before finishing off with all the visible parts.

The numbers stated below represent basic installation works. The job includes wall tiles, a wash basin, shower unit, toilet, and others. You will discover that the price varies based on the finish and style you are after. The labour costs of wet rooms generally remain at a relatively smaller percentage of the overall cost since most of the job has something to do with waterproofing and preparation.

There are several things that you need to remember here. For one, these costs are only average costs and these don't include VAT yet. In addition, labour in the southeast and in London can increase by up to 20% so be sure to remember this, too.

Large-sized wet rooms - More than 7 days at over £12,000

Medium-sized wet rooms - 5 days at £,8000

Small-sized wet rooms - 4 days at £4,000

Factors That Affect the Cost of Wet Rooms in the UK

There are several factors that affect the cost of turning your bathroom into a wet room and this depends on the level of sophistication that you prefer.

Average Labour Rates

The labour rates have minor effects on the total costs of the project. An estimate of the cost proportion for typical wet rooms implies that the materials make up around 85% of the overall costs with the labour making up just the remaining 15%.

The typical costs of labour range from as low as £150 up to £250 daily for skilled bathroom fitters, plumbers, or specialist wet room installers.

The process of installation can take as long as one week for two persons. This doesn't involve the removal of the existing fixtures in the bathroom fitting. As expected, extras that go over and beyond an average basic wet room is going to cost more and take longer as well.

Starting from the planning stage, you need to decide on the supplier of the materials you will use. It will cost you more if the installer will do this since you will be paying for the time they will take. However, a specialist will know better what they are doing and you can trust them to buy the right items from the get-go.

source https://www.ketteringpiperightplumbing.co.uk/blog/how-much-does-a-wet-room-cost-in-the-uk/

Plumbing a new house is a complex job that involves more than simply fitting radiators and running pipes. An engineer is required in the different stages of the building process to address tasks that can range from testing the boiler to running the guttering.

Cost to Plumb a New House

It is a pricey and complicated job to plumb a new house. The average cost of installation of plumbing in a new house in the UK with one en-suite and one main bathroom is as follows:

£13,000 for a 2-bedroom home

£15,000 for a 3-bedroom home

£17,000 for a 4-bedroom home

The above quotes include the labour for general and bathroom installation of new pipework all over the property and having it connected to the mains service where required including sewerage, drainage, and water.

Your choice of fittings, fixtures, and pipes will have an effect on the price and also your property's style and size and your location.

Factors That Affect Plumbing Cost

Every property and every job is unique and different yet there are specific factor that can affect all the quotes and costs for plumbing installation in general. The cost for plumbing installation will be higher for bigger jobs and larger properties. However, there are still many other variables that affect the prices of plumbing works. These include the following:

The costs of plumbing installation will be higher for properties and existing plumbing systems that are in poor condition.

If the property's plumbing is difficult to access, this will increase the cost and this will include those to make good any affected area after the completion of the job.

Plumbing installation costs in new homes will vary all over the UK and cities like London tend to have more expensive new plumbing installation costs.

Need for waste or drainage pipework

Installation or replacement of drainage and waste pipes can further increase the overall costs of plumbing work.

Quality of new fittings and fixtures

The cost of replacing plumbing will be higher if you specify more expensive fittings and fixtures.

Other Considerations for Plumbing Installation Costs

The following are additional costs you might need to pay during plumbing of your new house:

The total cost will factor in any prep work that the plumber needs to do prior to starting the job or before the arrival of your chosen tradesperson.

It is more expensive to hide pipework than to just surface mount it and leave it exposed. Expect to pay more if you want to have your pipework concealed.

Costs for plumbing may also include finishing any necessary painting or tiling.

If there is a need for your tradesperson to dispose of and remove any waste, this will also be included in the total cost of plumbing installation.

There are several factors considered for plumbing cost for a new house in the UK. Being familiar with these will help you set your budget accordingly.

source https://www.ketteringpiperightplumbing.co.uk/blog/how-much-does-plumbing-cost-for-a-new-house-uk/

Do you need some plumbing work done in your home? If yes, you probably want to know how much plumbers charge per day.

Location and Its Effects on Plumber Costs and Rates

The daily and hourly rates of plumbers and plumbing companies can vary considerably depending on the location. For example, daily rates in Central London are often the most expensive in the whole UK. On the other hand, in more rural places such as Scotland and Wales, you can expect that the daily rates of plumbers are much lower. Do remember that boiler services & heating engineers charge different rates entirely.

Day Rates of Plumbers

The day rates of plumbers depend on how complex the plumbing job is and the number of days of work is being offered. The day rate charges of plumbers are often exclusive of the materials used.

For instance, there are commercial site workers that charge £100 per £120 per day for some jobs such as second fixes. However, it is likely for their workload to be guaranteed for several months or even permanent in some instances.

One off day rates for plumbing are probably closer to the £250 range. A job quote that will likely bring in one to two weeks work is going to be closer to a range of £150 to £200 per day. This is the common range that most day rates for plumbing fall into.

You can expect that there will also be plumbers that will have higher daily rates than others e.g emergency plumbers. It can be because of huge workload because of recommendations, location, or simply because they are efficient and they can finish more work that average plumbers during average working days.

Hourly Rates of Plumbers

If you just need a job that will just take one to two hours or a quick-fix, you will get a fixed price depending on the hourly rate of the plumber.

You can expect to pay £25 to £40 without including the materials. This means that if a job will take 3 hours, you should be ready to pay £75 to £120 on top of the parts required for fixing your problem.

For smaller jobs that will only take one hour, the charge starts at £40 per hour or higher. For jobs that will take 2 to 5 hours to finish, it is likely that you will be paying anywhere near £25 to £30 per hour.

Now, these figures may seem a bit expensive. However, don't forget that they will only charge for time-on site. The plumbers will need to consider the time to quote the job, fuel, travel, wear and tear on the vehicle, and others. All of these costs will quickly add up. This means that by the time they have picked up the materials for the job and complete the work, it is not likely that they will still have enough time to fit another job to their working day.

As for simpler jobs such as fixing taps or repairing a toilet that constantly overflows, the cost of materials will be minimal. But, if you will fit a basin or toilet, about £100 or more will be added to the overall cost.

source https://www.ketteringpiperightplumbing.co.uk/blog/how-much-should-a-plumber-charge-per-day/

Are there random bubbling noises that seem to pop out of nowhere every time you turn on your central heating system? Does it feel like you lose heat whenever your boiler is working hard? The most probable cause is the presence of air bubbles in the system. When this happens, you should bleed your boiler before things get worse to the point that you will need heating repair or worse, a replacement.
Bleed Your Boiler If There are Bubbles
The presence of air bubbles in the heating unit is actually common. The air may stay from the last time that the boiler was topped off. Poorly fitted ducts or leaks are also other causes. No matter what the reason might be, you need to bleed your boiler to be sure that your radiator will work efficiently and prevent oxidization of the ducts. There will also be a change in your electricity bill once you have completed the maintenance of your unit. It may be that you need a boiler replacement.
Steps for Bleeding Your Boiler
You will need a few pieces of supplies if you will try draining your boiler by yourself. Some of the materials you need include radiator bleed-key or a screwdriver, a towel, and a tray for collecting liquid. Here are the steps you need to follow to bleed your boiler safely and prevent damages to your system.

1. Set the radiator to the highest heat setting and make sure the boiler starts circulating water. Let the boiler remain in that setting for a minimum of 15 minutes.

2. Turn central heating unit off to stop the water or airflow from being pumped all over the unit. Wait for about 10 minutes to let your boiler cool down first.

3. Use the valve to turn off the radiator closest to your heating boiler. Don't forget to put the towel and tray so that you won't be dealing with a mess you need to clean up later on.

4. Turn left until the water comes out instead of air with the use of a bleed key or screwdriver.

5. Now is the time to close off the bleed valve.

6. Do the same process again with each of the radiators. Once you are done bleeding each radiator, you can now turn on your boiler again.

7. Check the stats this time. The water pressure must be anywhere between 1.5 to 2 bars.

When Should You Bleed Your Boiler?
It is actually quite easy to tell if your boiler needs bleeding since the upper section is going to remain a lot cooler compared to the bottom section. There are even severe cases when the entire radiator remains cold even if the heating system has been turned on. It happens as the result of the trapped air displacing the hot water that typically heats up the radiator.

The air will then get released once the boiler is bled. The hot water is going to freely flow once the air has been released.

Make sure to bleed your boiler whenever needed to ensure that your unit functions properly at all times.

source https://www.ketteringpiperightplumbing.co.uk/blog/how-to-bleed-a-boiler-uk/

Plumbing is an essential step in installing a new toilet in the bathroom. While there are many reasons why you want to get a new toilet installed, what matters here is the fact that plumbing is something that you can never skip.

The own waste outlet of the toilet is the start of any toilet waste system while the soil stack is the main pipe. The stack is a vertical pipe with a length of 3 to 4 inches. This pipe drops into the sewer and this is connected to a pipe measuring 2 inches rising through the roof to offer venting.

Three basic fittings are required for connecting the new toilet to the existing stack. The first fitting holds down and seals the toilet. The second one directs the flow of water to the stack while the third one is what ties the new toilet to the stack.

Here are the steps to do plumbing for a toilet:

1. Identify the location of the new toilet's hole. Use a tape measure to measure from the walls. The hole must be 12 inches for most models starting from one of the side walls and the back wall.

2. Use a reciprocating saw for cutting out the hole. The hole must have a diameter of 3 inches to have enough room for the 3-inch waste pipes for most toilets. However, the toilet waste line must have a diameter of 4 inches depending on your toilet model as well as the distance between the soil stack and the toilet. When unsure, it is best to consult a plumber.

3. For installing a toilet flange, push the pipe through floor and set the plastic or metal ring on the subfloor. The upper ring must be flush with the finished floor's surface. Bolt or screw the flange into the subfloor.

4. A PVC closet bend must be dry fitted onto the flange pipe extending through the floor. This closet bend is the 90-degree wide-sweep elbow used for installing toilets.

5. Measure the distance between the soil sack and closet bend's stack and use tape measure and spirit level to form a mark on the stack to create a slope on the connected waste pipe going to the stack of ¼ inch per foot. For instance, if there is a 6-feet distance between the stack and the bend, the mark must be 1 ½ inches below the upper portion of the bend outlet.

6. Use a handsaw for cutting through the stack following the mark. The sanitary fee should now be inserted and the inlet should face the toilet. There is a sweep inlet in a sanitary tee instead of a straight one. This sweep must face downwards.

7. Using the handsaw again, cut the length of the 3-inch PVC pipe equivalent to the distance between the tee inlet and bend outlet with additional 2 inches. This must be dry fitted between the tee and the bend.

8. Use dry fitting to disassemble all the assembled parts and assemble them again using PVC cement when you are finally sure that all parts fit. The waste line should be glued in last and double-check the slope before doing so.

source https://www.ketteringpiperightplumbing.co.uk/blog/how-to-do-plumbing-for-a-toilet-uk/

Info by Kettering Piperight Plumbing:

The boiler is the very heart of the central heating system of your beloved home. This is why having a new boiler installed tends to be a complicated and expensive process. One of the first steps you need to take before you get all too excited to buy a new boiler is to know how much it will take you to install one.

How Much Will It Cost You to Install a New Boiler?

Hiring a heating engineer for installing your new boiler has an average cost of about £2,000 to £3,000 and this price depends on the quality of your chosen boiler, its ease of installation, your location, and your chosen optional extras.

Prices of New Boilers

Here is a quick overview of cost estimates for hiring a professional tradesman to install your new boiler together with additional features:

£2,100 for boilers with thermostat completed in 1 day

£2,500 for boilers with thermostat and 10 TRVs or Thermostat Radiator Valves completed in 1 day

£3,000 for boilers with thermostat, system flush, and 10 TRVs completed in 2 days

£3,500 for boilers with thermostat, new cylinder tank, system flush, and 10 TRVs completed in 2 to 3 days

Average Cost of New Boiler Installation

The average labour cost for new boiler installation is approximately £500 for straightforward jobs that would include simple replacement of the existing boiler with the new model and the use of the existing water and gas pipework.

However, the cost to replace the central heating system that includes the boiler plus controls or thermostat, on top of s plus new pipe for gas supply, and rerouting radiator water pipes can easily cost you £3,000. Most local heating contractors usually provide schemes for monthly payments of the new boiler or finance packages to let you spread over the payments for a few years to soften the blow and make it easier on your budget.

Installation Prices for Different Boiler Types

The fitting or installation cost to install new boilers is approximately £1,000 for all types of boilers. Below is a quick overview of the installation costs of different types of boilers:

£1,100 to install new oil fired boilers

£1,050 to install new system boilers

£900 to install new gas boilers

Labour Timeframes and Costs

Gas safe engineers often charge anywhere from £150 up to £200 per day in labour. But, the job of having a new boiler fitted shouldn't take much longer than one day unless there are plenty of pipeworks to be done or there is a need to move the boiler. It is also important to remember that the job can take one more day if the whole system will be power flushed depending on how many radiators are there and how badly the system required flushing.

Most boiler specialists often work in pairs to complete the job faster and for safety and health reasons as well. In cases like these, you may need to spend £250 to £30 a day for labour.

source https://www.ketteringpiperightplumbing.co.uk/blog/what-does-a-new-boiler-cost-to-install/

Both plumbing companies and self-employed emergency plumbers in the UK need specialist insurance protection. The insurance policy of plumbers must provide the basic foundation of all essential covers including public liability insurance together with other options for cover to provide the required comprehensive protection.

Plumbing companies must get employer's liability insurance. It is considered a legal requirement in almost all situations with the only exception having family members as employees.

Coverage of Public Liability Insurance for Plumbers

While it is not legally required to have a public liability insurance, this is still worthy to have for many good reasons. This will cover all financial liabilities that may occur as a result of your job. For instance, if there is a pipe leak after your work and the building incurs damage, the policy is going to pay customer with the set compensation amount.

Similarly, if any member of the public suffers from injury because of the plumber's work, the plumber's insurance policy will cover all compensation payments and legal costs that will arise.

Plumbers must be requested to present their public liability cover before the contract is awarded to them.

Coverage of Employer's Liability Insurance for Plumbing Companies

Employer's liability insurance is different from public liability insurance as this one is a legal requirement according to the Employers' Liability or Compulsory Insurance Act 1969 for plumbing companies with one employee or more.

Based on the law, it is the responsibility of all employers to ensure the safety and health of their employees while doing their job. If an employee suffers from injuries while working or falls ill because of the job, they may sue the employer and receive compensation. This obligatory insurance cover is meant to cover the costs of successful compensation claims.

The law requires employees to have an employer's liability cover of a minimum of £5 million although many policies actually offer coverage of at least £10m. It is possible to increase the amount as needed. The law also requires employers to present in the workplace a certificate of employers' liability insurance. The company may be required to pay a fine worth £2,500 if it doesn't have the right cover.

Having the necessary insurance doesn't change the obligation of the employer to look after the safety and health needs of the workforce. The provider of employer's liability insurance may refuse paying a claim or might file a case against the employer for compensation payments that it makes if it is proven that the employer ignored its responsibilities in relation to this.

source https://www.ketteringpiperightplumbing.co.uk/blog/what-insurance-does-a-plumbing-company-need-in-the-uk/

# data[].attributes.attachment_link.description
Everyone already have an image in their mind of how their dream bathroom will look like. But, no matter what kind of bathroom you might want to have, the cost of the project is one of the things you need to consider.