# data[].attributes.body
Yes because there is four sides on a square

# data[].attributes.body
I agree because a square has 4 sides and any number can be divided or multiplyed by 4

# data[].attributes.body
Always because a square has 4 sides and any number in the 4 timestable  can be multiplied or divided

# data[].attributes.body
Always, because the multiple of the 4 times table and the square’s side is 4, so it has to come.

# data[].attributes.body
Jemy is correct

# data[].attributes.body
I agree with Johnny because there are four sides on the shape Johnny is correct

# data[].attributes.body
I agree with Johnny because there are four sides on a shape so therefore Johnny is correct.

# data[].attributes.body
Ruta is correct.

# data[].attributes.body
I agree with Johny because a square only has 4 sides

# data[].attributes.body
I agree because a square has only four sides so that’s my answer.

# data[].attributes.body
I agree with Johnny because a square has 4 si

# data[].attributes.body
It’s in the 4x and 2x

# data[].attributes.body
I agree with Jenish because that answer everyone is saying the same answer.

# data[].attributes.body
I agree with Johnny because there are 4 sides on a square.

# data[].attributes.body
I agree because there are four sides on a square so this means Johnny is correct

# data[].attributes.body
I agree with Rutthik.

# data[].attributes.body
I think Johnny is correct because a square has 4 sides.

# data[].attributes.body
I agree because each square have 4 sides

# data[].attributes.body
JeremiahWaffle

I think Johnny is right because a square does have four sides

# data[].attributes.body
I think Jonny is right for a prematior has to be measured checked and see how many centemeters are there.For example a box and a large ruler I need to measure all of them sides then once I found it I have to add them together once I have done that I have measured the box

# data[].attributes.body
I say Sometimes because......

# data[].attributes.body
I agree because if you know your 4x tables and the square has 4 sides on it.

# data[].attributes.body
In i learned that 5 and over move up 1, 4 and under move down. In columethod I learned that if 1 number is smaller then the other example if the 1s can’t Mach the 10s you will go to the 100s. In bus method you have to move the number in to it, 6 into 18 3 times but if you can’t do it you have to exchange.

# data[].attributes.body
Always because one square has only 4 sides.

# data[].attributes.body
Always because if there are 4 sides it’s going to be in the fours times tables because if there are 2 sides the perimeter is going to be 8 and 4times two is 8.

# data[].attributes.body
I agree because a square has 4 sides and if you time a number by 4 the answer is in the 4 TimesTables. You must use your basic knowledge

# data[].attributes.body
I agree with jonny because a sq

# data[].attributes.body
I agree with Johnny because a square has 4 sides and multi pulls of 4 can be divided by 4 by Kara Leane Jane Evans.......................................!

# data[].attributes.body
I agree because a square has 4 sides and multiples of 4 can be dived 4.

# data[].attributes.body
In rounding I learned that 5 and over round u

# data[].attributes.body
I learned in rounding if it is 5 and over go 1 up 4 and under keep it still in

# data[].attributes.body
Well, I agree because a square has 4 sides and if you time any number by 4 the answer is in the four times table

# data[].attributes.body
I agree

# data[].attributes.body
I agree with Johnny. By Kara.

# data[].attributes.body
In math, rounding I learnd that 5 and over round up 4 and under keep still

# data[].attributes.body
I agree because 4 can go in any num

# data[].attributes.body
Sometimes because all the sides can be 4cm but sometimes it will be 1cm+ so it can be higher than 4cm so the answer is sometimes it will all be 4cm.

# data[].attributes.body
Johnny is right because a square has 4 sides and if it is 27 divide by 4 it won’t have an equal side.

# data[].attributes.body
I agree with johnny

# data[].attributes.body
I agree because if you

# data[].attributes.body
I agree because if You know r is in the four times tables and the anwser will be 1

# data[].attributes.body
I agree because if you do

# data[].attributes.body
Johnny is right beacause a square has 4 sides so it 4+4+4+4 is=16 and a rhombus has 4 sides AND A RECTANGLE

# data[].attributes.body
Johnny Johnny says yes but I do not agree with him because if the perimeater is not even it can not be the same perimeater.

# data[].attributes.body
i agree because a square has 4 sides and if you times it it will be in the 4 times tables for e.g each side 4 cm and you times it by 4. 4 times 4 is 16 and 16 is in the 4 times tables.

# data[].attributes.body
In rounding, I learned that if it is under 5 move down but 5 and over move it by one. In columethod if you

# data[].attributes.body
I agree because if you have a square and the sides are 4cm and 4 times 4 is 16 so the whole distance around the shape is16

# data[].attributes.body
I agree because if you know your 4x tables th

# data[].attributes.body
I agree because a square has 4 sides

# data[].attributes.body
Always because a square has 4 side

# data[].attributes.body
I agree because a square has 4 sides and if you times it, it will be in the 4 TimesTables for e.g each side 4 cm and you times it by 4. 4 times 4 is 16 and 16 is in the 4 TimesTables.

# data[].attributes.body
I agree because a square has four sides for an example 8cm would be your perimeter if there is two on each side so the sum would be two times four.

# data[].attributes.body
Always because a square has four sides and it needs to be in the four timestable

# data[].attributes.body
I think always because a square has 4 sides so the perimeter of a square should be 4

# data[].attributes.body
Always because a square has four sides and it has to be timesed by four

# data[].attributes.body
Always because a square has 4 sides and any 4 times table can be divided by 4

# data[].attributes.body
Always because a square has 4 side.

# data[].attributes.body
Always because a square has 4 sides and every 4 times tables will go evenly into a 4 sided shape.

# data[].attributes.body
Jathoori
Always because a square has four sides so any 4 times table number can be divided and multiplied by 4

# data[].attributes.body
Always because a square has 4 sides and so the sides so it has to be in 4 times tables

# data[].attributes.body
Always because a square has four equal sides so you would a multiple of four because a square has four equal sides.

# data[].attributes.body
Zainab
Always because a square has 4,equal sides so a number in the 4 times table can be divided by 4 and can be multiplied by 4

# data[].attributes.body
Always because if you see a square it has 4 sides and you will need to times the number .It should be in the 4 times table

# data[].attributes.body
Always because a square has 4 sides and a side of a square should be times by 4 so the perimeter will be in the 4 times table

# data[].attributes.body
Always because a square has four sides so the the sides should be
times by 4 so the answer of the perimeter is in the 4 times tables.

# data[].attributes.body
Always because a square has 4 equal sides and you can divide every 4 time table by 4.

# data[].attributes.body
Always because there are four sides in a square and every side is equal which means it will be in the 4 times tables so the answer will always be in the four times tables in the perimeter of a square.