# data[].attributes.body
Painted long strands of hay looking things with a dark purple paint using a paint brush. Used some card stock and hot glue to put the hairs strands together then attach them to the back of the mask. Added hot glue to position the hair to some areas.

# data[].attributes.body
Added eyelashes and golden snakes using glue into their designated area. Paint blue dots using a paint brush. Added blue sand using glue and brush.

# data[].attributes.body
continued outline areas of the mask with black paint, using a paintbrush. Began adding red charms on the bloody part of the mask. Added sand in the eye, inside of the nose, and top head of skull with 3 different sand colors using a brush and glue.

# data[].attributes.body
Painted white on the horse eye then add pink streaks. Painted the dots on the alive side of the horse. Used black to outline areas of the skull. Painted black scales on the snake.

# data[].attributes.body
Painted pattern on snake and dotted its eyes. Started painting the eyeball

# data[].attributes.body
Mixed bunches of colors to paint my horse skull by using brushes and paint. I worked first on my horse side later my snake then my horn then again my skull side. I used water and paper towels to damp or remove some areas.

# data[].attributes.body
Painted the skull side of my horse mask with a paintbrush, using a bone like color. I wiped off some paint if it was too much, so it can appear textured.

# data[].attributes.body
Added a few peas with a hot glue gun. Removed some peas and glue residue by hand.

# data[].attributes.body
Continued adding peas on the back and more on the horn using a hot glue gun.

# data[].attributes.body
I began adding peas using hot glue to attach them in areas I want people to focus on my mask.

# data[].attributes.body
Sanded my mask then painted it white which was bad as I was a step ahead of the class.

# data[].attributes.body
Scalped my entire horse mask by using my hand to spread the material onto it which repetitively took out of a bowl

# data[].attributes.body
Continued applying newspaper with wheat paste in very small areas and let it dry

# data[].attributes.body
Continued to add news paper strips that were wet with wheat paste, onto the mask and below it. Used paper mash in some small areas that needed it then covered it with newspaper strips.

# data[].attributes.body
Kept applying paper that was wet with wheat paste while also removing some places and adding places with paper mash.

# data[].attributes.body
I continued to cover my whole mask with long strips of news paper. I unfolded the bottom piece of my snakehorn to prepare placing it in a hole at the middle of the head by cutting that hole using a razorblade. I worked on the snake horn from bottom to top by using paper mash and long strips of newspaper.

# data[].attributes.body
I continued covering the horse mask with long strips of paper plus the snakehorn and used paper mash to fill in any areas missing volume.

# data[].attributes.body
I began adding long and wide strips of newspaper and covered all the paper mash area with side strips on the head. Added paper mash on the horn to fix the proportions. I cut a wire piece with pliers and folded it then twisted and finally stabbed it into the snakes mouth. Which I covered it with a thin layer of newspaper.

# data[].attributes.body
Began working on the horse side by using the paper mash method which is putting scraps of news paper into wheat paste and then applying it to the mask. I cut a wire and made a new paper ball and inserted the wire into it and continued coating the eyeball with news paper.

# data[].attributes.body
Continued the paper mash method modifying and removing some areas. Helped the head of my snake to look more like a snake by adding paper on the center of each side. Worked a lot on the skull side rather than the horsr

# data[].attributes.body
Wrapped around my snake horn from the bottom like a spiral using paper mash.

# data[].attributes.body
Built more volume to my horse skull mask by adding strips of paper into wheat paste and then applied it to the mask to create more form.

# data[].attributes.body
Stripped and cut my paper into small pieces and drenched them into the wheat paste to create clumps of paper balls and bent them to however I wanted to shape the skull better.

# data[].attributes.body
More wheat paste and newspaper being applied to my mask. I decided to work on my horn so I grabbed wire, bent it in half, and twisted it. I rolled newspaper from the corner till halfway I placed my wire rod in and continued rolling my newspaper until it reached the end. I wrapped the newspaper with wheat paste all around the horn and bent it to shape. I added clumps of newspapers to begin making the swirls of the horn.

# data[].attributes.body
Continued adding news paper on the paper mache mask by using wheat paste. Added more volume in the process with news paper.

# data[].attributes.body
I got rid of some paper pieces that was not suppose to be part of the volume process until way later. I began stripping pieces of paper from a pack of news paper and rubbed every individual strip with wheat-paste and applied it to the horse skull.

# data[].attributes.body
I plan to remove some pieces when I get back which are the eye outline, some parts of the ear, and much more as that is to be done later. How I did these pieces was by using newspapers and tape.

# data[].attributes.body
I continued adding volume to my mask by using newspapers and tapes.

# data[].attributes.body
I continued using leftover cardboard to add the skin of a horse on the top right. I taped down my mask. I barely started adding newspaper on my mask to build volume.

# data[].attributes.body
I attached my mask outline onto a cardboard and began cutting it with scissors. I did not get half way done.

# data[].attributes.body
I continued cutting my outline and refined the piece using scissors. I used the leftover cardboard I cut and created a horse ear.

# data[].attributes.body
Finally, I was able to get the outline of my mask through the projector and started snipping the piece with the newspaper while following the lines. I refined and removed pieces of the outline.

# data[].attributes.body
Ripped a bunch of newspapers into strips and applied wheat paste on them. Then, I covered the plastic mask with the strips until there were 15 layers.

# data[].attributes.body
I added flat pieces of clay in the shape of a single scale. I shaved the pieces using a loop tool. I dug in the middle to give it a unique shape compare to the ones I did before.

# data[].attributes.body
I added flat pieces of clay in a shape of a circle and shaved off the piece using a loop tool. I shaped the pieces where the top was round and the bottom was getting smaller on the side and there one be a small too. I used a sponge in between my process. I texturized further my ice cream using the needle part of the wooden tools. I added clay on the bottom part of my bowl so it would be able to sit properly on a table.

# data[].attributes.body
I touched up my icecream bowl a bit and went to work on the bottoms for my chocolates. I experimented in how they might be. I flatten out some clay and cut long strips of it. I used a card side to side and the cut the end at a 45 as I would connect them together. I pull them apart and flatten them further. Some came out wonky and broke easily.

After school I did the same process but with a thicker shape and I did not like it. So i was going to stay with the thinner pieces

# data[].attributes.body
I tried creating shark teeth or human teeth. They came out okay but I am unsure whether I will use them or not.

After school,

I created a ladybug, a lemon, and two small bugs. I first molded them to shape then let them harden a bit. I used a wooden tool to start getting rid of some pieces. I continued refining the pieces and then added details. For the ladybug I screw in holes and added lines. For the lemon I made its small hills on each end and added dots all over it. For the two bugs all I did was add lines and refined them and made hills.

# data[].attributes.body
I attempted to make a different type of gummy worm but I was not likely how it was turning out so I scrapped the idea out and worked on the drizzle part of my truffle. The long coil was of course breaking when I was attaching which I did not mind and managed to make the squiggly drizzle.

# data[].attributes.body
I created one eyeball using clay and getting rid of clay using the wooden tools. I first outlined then dug the the sides and smooth them out and lifted the iris. I know that eyes are not typically made this way but I wanted an eye that had volume.

I also created a heart shape chocolate with a lined design. I used wooden tools for this mainly using the exacto knife to crate the lines and smoothing out the piece.

# data[].attributes.body
I continued refining the bowl's rim and bowl by using a large loop tool and a small one. I got rid of some clay and add some when it was necessary. I noticed that my ice cream I made beforehand was too small for my bowl and so I had to restart. I was hesitant to the idea but I marched onward. I worked on the cone of the ice cream and took a different approach. I flattened out a piece of clay and cut the pieces to resemble the pattern of a cone. After that had hardened a bit, I added fresh clay onto the pieces and as I pulled it out it gave me a cone texture. This should have been effective but I did not let it dry enough and it came out uneven in some parts. My solution was to use the chocolate chip from my previous ice cream I made because it was square and it would make it easier to shape my cone pattern. I applied pressure to the flat piece and managed to get my cone. I cut the pieces into a triangle and cut some pieces off on the side.

# data[].attributes.body
Since I had experience now in creating ice creams I did the same process as before but other parts were handled more differently. Instead of using a circle measurement I simply use my fingers as reference in creating a circle. I hollowed out the ice cream base and added the sides of the ice cream. I began texturizing the piece using the needle part of my wooden tool and dug in. After some drying and rid of some clay and expanding, I began to add lines as I was reference from both really ice creams and toy ice creams to get some idea to how to properly texture which included videos too. I worked on the chocolate chip by making a clay piece into a square and after it had dried I began shave it on a 45 degree angle on the sides using the exacto knife part. I flatten out the bottom. After it seemed good enough I shaved in-between the chocolate chip to create layers of a chocolate chip bar. I continuing shaving the piece till it looked okay to me. I made whip cream although it looked good, I was not sure how I would add it to the other pieces that already worked well together. I worked a blueberry and I used the exacto knife to create a * outline and cut in those line and let it dry. I pulled the pieces up a bit and bent them downward. I tidy it up by making the pieces little hills. I would do this to the second blue berry.

# data[].attributes.body
I made half a circle and created a swirl by using a wooden tool and would be my chocolate piece. I did the same process to make unicorn horn. I create one short pike and one long spike by pushing my side of the clay down while the rest was up and refining it using a wooden tool. I added lines in one of my gummy worms using a wooden tool and added more clay for the head. I made another gummy worm but may longer than the rest. I made a big chunky gummy worm using the wooden tools. All the things I have been thus far for my bowl including the ice cream bowl have been howled out beforehand. I made another chocolate piece that was oval shape and had a dent in the middle and managed to do this with my finger and a wooden tool for refinement.

# data[].attributes.body
I used my finger to create a long rectangle shape then rounding it the edges and bent it which made a gummy worm. I made a round half a cylinder and used a wooden tool to outline the piece diagonally. I dug a little bit deep and angled my piece at a 45 degree angle and scooped up and rounded each bump and made a marshmallow. I rolled out clay into a sphere then squished the piece and let it dry. I shaved the sides and the top and bottom using the exacto knife and made 4 sweet tarts. I cut a big chuck of clay into smaller parts and rounded them out. I cut them in half and corrected the piece by making it look like a circle on top but had a flat bottom which I used the exacto knife to do that part.

# data[].attributes.body
After working really hard in the weekend, I was able to create all the pieces required to put them all together. I did some last final touches by adding texture using my previous ice cream base and added drips of oozing ice cream on both sides. I slip and scored the ice cream onto the bowl. I refined the lines of the ice cream. I was imaging the set up for my topping and made a hole for the cone so it would be stable for it to stand. I only added slip on the surface of the ice cream to be the whipped cream and attached the cone first then the blueberries and the chocolate. I would come after school to readjust the chocolate chip and add more texture and shave off bits of pieces of the bowl altogether. I was basically almost done with my bowl but decided to store it away and begin working on another bowl.

# data[].attributes.body
I created a coil so I would add it on the top and bottom of the bowl. Of course the coil was uneven but I was not going to go through such a challenge and tried to work with it. I added a slip to the rim of my bowl after it had dried the day before a bit and I scored it. I smooth things out a bit and let it dry. After it dried a bit, I worked on adding a bottom to it which I made another coil before and slipped and scored it on.

# data[].attributes.body
I began working on a handmade bowl and my first attempt was not what I expected. With this failure I learned my mistakes and attempted again and it turned out better. I cut the rim of the bowl and let it dry. I did not want a typical bowl but instead a sundae bowl meant for ice creams. I pushed 5 places inward that made a star like shape.

# data[].attributes.body
I worked on the ears for the rabbit which I did not attach yet as one was shorter than the other. I made another fence pole but this time it was way longer and chunkier which I did not like so I shave off some pieces using a wooden tool. I continued working on the rabbit to keep defining its features. I tried to give both the clay fence poles some wooden texture by stripping some clay off. I attempted to create barbed wire but since making a coil really thin, its bound to crack and rip apart and I noticed how challenging it was.

# data[].attributes.body
I attempted in creating a rabbit. I got the basic shape of the body and attaching them together. I tried to be precise with my work so that both sides would be identical and this was done by outlining both sides simultaneously using a wooden tool that had a sharp end. I shaved off some pieces of clay when it began to harden.

# data[].attributes.body
During this time, I was continuing to texturize my ice cream using a needle that had not been washed and utilized the dried clay that was on it to give said texture. Meanwhile I worked on a different bowl idea that I would soon give up on the 12th. I grabbed a spiky ball I find on the ground to give a flat clay pieces some texture to resemble grass. I also worked on one fence pole.

# data[].attributes.body
I removed my beads as they were too small for my liking and made them bigger and only added two instead of three. I flattened my ice cream a bit more using a spoon. I removed some crumbs using a needle tool. I reattached using slip.

After school, I would be making a splat to resemble chocolate syrup and texturize the ice cream further.

# data[].attributes.body
Continued working on my ice cream by creating textures and rounding it using a needle and a spoon. I used a perfect circle measurement tool to help create the shape. I used a triangle measurement tool to help create my cone and chocolate. I made small spheres to decorate the ice cream. I shaved some pieces off the chocolate piece using the other end of my needle tool. I attached lone clay stripes to make my cone look like a cone although it does not I will continue working on it.

# data[].attributes.body
Continuing to add minors and removing clay. Refining areas of my hand.

# data[].attributes.body
Continue doing my minors using a needle tool. I removed and applied clay. I let it dry. I worked on it during lunch and after school. I continued working on my minors and removing and apply clay just as I did during the period.

# data[].attributes.body
I focused on apply clay to redo my proportions of my hand. I cut my fingers where I would bend them and add clay. I reshaped my hand using a ribbon tool. I added support to my hand so my fingers would not fall down.

# data[].attributes.body
I applied clay to the lid part of my bottom part of my hand because I had been shaving it and made my hand uneven. I added bridges and they were not thick. I did not want to redo that step as I had already sealed my hand so I put up with my mistake and pushed forward.

# data[].attributes.body
I continued adding and removing clay to parts of my hand. I kept refining my hand mainly in the back. I added small pieces of clay to my nails.

# data[].attributes.body
I continued hollowing out my hand and worked on the top part of my hand using small ribbon tools. I applied clay inside if I took too much clay away as it would make my hand easier to create an indent when applying pressure.

# data[].attributes.body
I used the wire tool to cut my hand in half and hollowed out the bottom part first using many different sizes of loop tools. I used a needle tool to create 3 holes in the thumb as instructed.

# data[].attributes.body
Worked on the majors for the middle finger, ring finger and thumb using a needle tool.

# data[].attributes.body
Continued to apply clay to the palm. Reshape the hand using the loop tool. Fixed the nails by adding clay and refining it. Worked on the minors of my pinky finger which I forgot that was suppose to be last.

# data[].attributes.body
Applied clay to the mainly the palm.

# data[].attributes.body
I continued adding clay to adjust my proportions but I also noticed that my palm was too elongated so I had to remove some clay near the bottom to improve the look of it. I redid the valleys near the top of my fingers as they were too deep, advice given from Stout, using a small ribbon tool.

# data[].attributes.body
Used a small ribbon tool to create my valleys. I tried adjusting the proportions of my hand by adding clay.

# data[].attributes.body
Worked on hand sculpture during class, lunch and a bit after and at home.

I focused on refining each nail using a metal tool and applying clay to add proportions. Worked on the valleys using a ribbon tool.

# data[].attributes.body
Worked on proportions. Added clay on parts needed. Worked on nails using a metal tool.

# data[].attributes.body
Fixed my finger proportions by adding clay near the bottom and refined the nails. I used a ribbon tool to shave it more into shape.

# data[].attributes.body
Refined my fingernails a bit more by using a metal tool and a felt knife while also reapplying clay for any mistakes made. I used a felt knife or create the webbing of my fingers.

# data[].attributes.body
I used a metal tool to refine and shape my fingernails. I used a knife to create a good outline on the sides of my finger nail. I used a ribbon tool to readjust and get rid of clay on hand.

# data[].attributes.body
After school, I used a metal round tool and a knife to continue doing the rest of my fingers which includes the index and thumb finger on clay.

# data[].attributes.body
I used a ribbon tool to refine and apply bits of clay on my hand. I used a knife to make a mark of my finger nail and I did to my pinky, ring, and middle finger. I also used a metal round tool to refine it too.

# data[].attributes.body
I came trying to attempt creating fingernails but it was not looking right so I kept applying and reapplying clay. I used a knife to create fingernails.

# data[].attributes.body
I bent my thumb forward and kept refining my piece using a ribbon tool and applying small pieces of clay to my finger tips.

# data[].attributes.body
Made my fingers smaller to match my fingers using a ribbon tool and used a mini sponge to smooth things out.

# data[].attributes.body
Even more refining using a ribbon tool.

# data[].attributes.body
More refinement using a ribbon tool.

# data[].attributes.body
I used a ribbon tool to continue rounding my fingers and refining each part of my hand.

# data[].attributes.body
Flatten out a piece of clay that was slatted. Then, I used a pencil to carve out my hand. I cut the outline using a knife. I began shaving it using a medium ribbon tool.