# data[].attributes.body
POWER MIG® 210 MP® multi-process welder is portable for MIG, stick, TIG, and flux-cored welding.

# data[].attributes.attachment_link.readable_text
Buy a POWER MIG 210 MP Multi-Process Welder and receive a $500 VISA gift card rebate.
View other Buy Red Save Green Rebates
Redeem Rebate

VERSATILE, RUGGED, SIMPLE TO USE.

The POWER MIG® 210 MP® power supply is a multi-process welder for the hobbyist, educator or small contractor who wants to do MIG welding and a lot more, including stick, TIG and flux-cored welding. The push-and-turn digital controls and color display screen make setup and operation intuitive and easy, while the all-metal wire drive and sturdy sheet-metal construction make it rugged and ready for any job in the home or small shop. The POWER MIG® 210 MP® power supply is the ideal MIG machine for the welding novice, with plenty of room to grow as you gain more experience.

ONE POWERFUL MACHINE

Take it Everywhere, Plug in Anywhere. ™

Lightweight and portable - just 40 lbs.!

Dual Voltage Inputs (120V or 230V) means you can plug into any common power supply

Ready. Set. Weld ®.

Intuitive push-and-turn digital controls make setup a breeze

Large color display guides you through the setup process

Advanced options and settings are simple to access

210 Amps: The power to tackle any job

MIG: Weld up to 5/16 in. mild or stainless steel or aluminum* up to 3/16 in.

Flux-Cored (Self- and Gas-shielded): Tackle the biggest jobs

DC Stick: Handles up to 5/32 in. stick electrodes

DC TIG: Enabled by Touch Start TIG® technology

*Spool gun required (sold separately).

Features

Lightweight and portable just 40 lbs.

Dual Voltage Inputs (120V or 230V) means You can plug into any common power supply.

Intuitive push-and-turn digital controls make setup a breeze

Large color display guides you through the setup process

Advanced options and settings are simple to access

# data[].attributes.attachment_link.keywords[]
power mig 210 mp| powermig 210 mp| soldadora mig| soldadura alambre tubular| soldadora con alimentador

# data[].attributes.attachment_link.description
Buy a POWER MIG 210 MP Multi-Process Welder and receive a $500 VISA gift card rebate. View other Buy Red Save Green Rebates Redeem Rebate VERSATILE, RUGGED, SIMPLE TO USE. The POWER MIG® 210 MP® power supply is a multi-process welder for the hobbyist, educator or small contractor who wants to do MIG welding and a lot more, including stick, TIG and flux-cored welding.

# data[].attributes.body
Versatile, Rugged, Simple to Use. The POWER MIG® 210 MP power supply is a multi-process welder for the hobbyist, educator or small contractor who wants to do MIG welding and a lot more, including stick, TIG and flux-cored welding. The push-and-turn digital controls and color display screen make setup and operation intuitive and easy, while the all-metal wire drive and sturdy sheet-metal construction make it rugged and ready for any job in the home or small shop. The POWER MIG 210 MP power supply is the ideal MIG machine for the welding novice, with plenty of room to grow as you gain more experience.

# data[].attributes.attachment_link.readable_text
Our Lincoln MIG 210 MP Review is a guide to help you know whether you should consider buying the welder.

Lincoln is a household name where welder manufacturing is a concern. The company has a catalog of welders to rival the best machine makers in the market.

Their power MIG welders are the most famous among the products they make. Metal Inert Gas welding channels current through the MIG electrode and the contact metal; the heat generated is enough to fuse the metal.

The Lincoln Power MIG 210 MP is a dual-voltage professional-grade power MIG welder with many great features.

This is the one we have tested out:

Lincoln MIG 210 MP Review

Check Price On Amazon

The Lincoln Power MIG 210 MP is a flexible mid and light industrial applications welder. Many professionals love the welder because it offers great flexibility.

High Amperage Welding Range

One of the best features of the 210 Mp multi-process welder is the amperage range, which is normally a good indicator of a welder's flexibility.

The Lincoln MIG 210 MP has an impressive input current range from 20A to 220A. It gives the welder great options.

Thanks to the range, you can have course and smooth welding arcs. The current control allows you to get deep penetrative welds for intricate jobs and shallow welds for simple jobs.

You can use many welding tips ranging from 6010 to 7018. You can use the welder for various tasks because of the input current range.

MP Multi-Process Welder

The Lincoln Power MIG 210 MP is a versatile machine. It has many machine processes that make it ideal for casual and experienced welders. It has four welding processes:

Flux Corded Welder: You can use flux corded wire to weld with the machine. You feed the wire electrode into the welding machine.

Stick Welding: Using flux-covered stick electrodes, you can lay the weld onto a metal surface. The recommended voltage is 27V, 175A.

MIG Welding: In metal inert gas welding, current passes via the power MIG electrode and the contact metal. It is great for welding aluminum.

TIG Welding: The welder is compatible with DC TIG welding. You use a non-consumable electrode (DC TIG weld aluminum) and shielding gas to prevent oxidation. The TIG torch heats the electrode.

The all-in-one welder is ideal for most jobs.

Accessories Available

The Lincoln MIG 210 MP has all the accessories you need to get up and run. These accessories are all-inclusive with your purchase. So, what do you get out of the box?

The manufacturer takes the inconvenience of having to source all these parts yourself. Note that the foot pedal doesn't come with your purchase.

Lightweight and Portable Welder

The Lincoln MIG 210 MP packs a lot of excellent features in a tiny and compact form factor. It has a small profile, which is ideal for transport.

The welder weighs 40lbs or 18.14kg. It is relatively light compared to any other multi-purpose welder.

The welder's dimensions are 14in×10.75in×19in. The compact design makes it ideal for portage because you can store it easily.

Due to its lightweight and portable nature, the welder is ideal for workers who lack a fixed workstation. You can easily move it about.

There is a carrying handle on top of the case. It adds to the transport ergonomics of the machine. The welder is ideal if you lack a job site.

Intuitive UI and Welding Settings

Power MIG welders are popular because they are easy to use, and the MIG 210 MP is no exception. The welder is appropriate for professionals and beginning welders.

The controls are easy to learn, thanks to the simple layout. The presentation is simple and ideal for new welders, who will quickly get acquainted with the machine's workings.

The welder has a sizable LED screen. It displays the necessary readings such as the machine process, voltage, amperage, etc. It makes reading these units easy and quick.

The knob adjustment mechanism allows users to enter their inputs fast and easily. It makes for a decent user experience. The UI's design allows you to have an easy time as you can focus on welding rather than settings.

Dual Voltage Welding Capability

The power Lincoln 210 MP has dual voltage capability. You can run it off two input voltage: the 120 low voltage and the 230 high voltage options.

You can use a common power supply, as most range from 110V to 240V.

The welder uses DC options. Dual voltage inputs provide great flexibility over the welding processes. It also lets you get the best out of the different machine processes.

The welder takes away the hustle of having to step down voltage from your main power source. It is ideal, especially for workers who travel to different locations for their jobs.

You get the 120V and 230V cables with your purchase. The welder allows you to use most DC power outlets without a step-down machine.

An ideal welder should be flexible and have multiple use cases. It is the case with the Lincoln MIG 210 MP.

The welder can handle mid-duty tasks easily. It is useful for general repairs around your home. You can use it for repair, welding, and maintenance tasks like reinforcing joints.

The machine easily handles general fabrication tasks. It makes it the ultimate welder for DIYers and casuals as it can weld mild or stainless steel.

Professionals will love the machine. It makes light work of general carbon fiber welds great for automotive repair shops. Distilleries will also get used out of the welder because of their processes and amperage range.

Long Warranty (Three years)

Any piece of hardware equipment should have a decent warranty. The Lincoln MIG 210 MP offers buyers a great warranty that lasts three years from the date of purchase.

The machines rarely have factory defects. The warranty is there for those rare occasions where some parts may be faulty.

The warranty covers the main unit and its accessories. You have the assurance of service if you get defective parts.

Check Price On Amazon

What Should You Look For In A Lincoln Welder?

Lincoln makes many welders suitable for different jobs. Some general-purpose welders can handle a broad number of tasks.

Multiple welders get tailored to a professional welder. How do you know what you should consider? Here are some pointers:

A good welder should have more than one machine process. Machine process refers to the different welds you can perform with a machine.

Most premium welders (multi-process welders) accommodate MIG welding, DC TIG, flux corded welding, and stick welding.

You can have a TIG machine only or a TIG process and stick welder for budget options. TIG welders are good for most tasks. MIG is great for welding aluminum.

Having a welder with different machine processes gives you flexibility. Multi-process welders are suitable for everybody.

Amperage range matters as it determines the machine's flexibility. A high amperage range allows you to use different rod sizes.

It is important, especially when dealing with diverse welding tasks. Some require a thick, less viscous molt than others.

A decent amperage range is great for professional welders as it allows them to meet most job requirements.

Some welders can go as high as 300A. They are suitable for welding shallow and deep material thickness joints.

Dual voltage support allows you to connect your welder to different power input sources. Most power input sources are either 110V or 220V. Dual voltage support allows you to use either, provided you have the right power cord.

Having dual support means you don't have to step the voltage up or down. You also don't have to worry about triggering the breakers as you weld.

It is a premium feature for welders. Some machines support both AC and DC power input sources. It makes the machine versatile and usable in any situation.

AC TIG welding also opens the machine to a broader range of aluminum welding rods. You have the option to use specialized rod types for particular machine welding jobs.

DC welding is convenient, especially if you need to do welding off the grid.

The user interface dictates the user experience. Some welders are clunky and old-fashioned. The interfaces reduce the appeal, making them difficult to learn and use.

Modern welders have simple knob inputs and LCD or LED screens. These screens output vital information that you MIGht need as you work.

Some welders indicate the machine process on the main display. A good UI makes the setup process easy.

Always check your machine's warranty before buying. A new welder will set you back a few thousand dollars. You must therefore ensure that the investment is secure by checking the warranty.

The warranty should cover the parts too. Read through the fine print to avoid spending extra to replace faulty parts. The warranty should cover the repair work hours on the parts.

Service is an important aspect to consider when buying a welder. You should avoid buying discontinued models as they are often out of service. You will not find parts of old models, making repairs impossible.

Check the model's service parts with the manufacturer before buying a welder. Newer models are always a safe option.

8. Jobsite or Portable Welder?

Welders come in different sizes and weights. Some welders are bulky and large. Such welders are suitable for people with a fixed workstation. The welders are not portable.

Other welders are compact and light. Some welders come with a handle and a set of rolling wheels. These welders are ideal for people who travel with their welders. They are suited for DIYers.

Cooling is an important consideration that you shouldn't overlook. Welders generate a lot of heat when they are in use. They, therefore, need decent cooling mechanisms to stay functional.

It would help if you bought a welder with large cooling vents to allow for sufficient aeration. Check whether the fans are large enough to channel heat out of the machine.

Auxiliary parts can be hard to find. It is why many manufacturers bundle them in with the main unit.

Aside from the foot pedal and spool gun, most accessories get included with your purchase. Ensure that you get the parts when you buy the machine. Note that some models MIGht exclude the TIG torch.

Buy a machine from a manufacturer with a warranty or a guarantee on the accessories.

11. Wire feed speed range (for flux core welders)

It applies to flux core welders. The corded wire size range and speed determine how fast the welder works.

A flux core welder with a high feed speed is ideal because it is faster. Some flux core models allow you to adjust the feed speed.

A MIG welder requires maintenance just like any other machinery. Failing to maintain your MIG welder will cause it to fall into disrepair. It also shortens the lifespan of the welder. How do you maintain the machine?

Keep the MIG welding terminals clean to guarantee great and consistent weld performance. Dirty terminals produce low-quality, amateurish-looking welds, which are undesirable.

Because the terminals typically come loose over long weld sessions, TIGhten them every 50 hours of use. Cover the terminals once they are cool if you do not plan on using the welding machine.

Do not store the terminals in a dump environment as they will stop working properly. It leads to poor welding quality.

The air filter traps dust and foreign particles and prevents them from being sucked into the pump. These filters accumulate dust if you run them in a dirty environment.

When the filter is too dirty, some particles MIGht get sucked in. Remove the filter and clean it thoroughly at least once every eight hours.

Do not neglect to check the oil level in your welder. Examine the levels and top them up frequently to prevent heating issues.

Oil the moving parts to reduce wear and tear. Oil the fans at least once every 100 hours of machine use to keep them spinning.

Do not use your welder for long periods without checking the fuel filters. To keep the welding machine functioning smoothly, you must replace the filters regularly.

If the filters are not clean, impurities such as rust and sediment will enter the injection system. Unclogging the filter is necessary to keep the injection system clean and prevent breakdowns.

Check the filter periodically to keep your welder running.

You should replace the battery connections after at least 100 hours of machine use. The connectors will wear out after a long use period and need replacement.

Always double-check that the connections are secure. Loose couplings can cause the welder to shut down or not turn on at all during operation.

Replace old batteries when they run out. Clean the terminals to prevent dirt and debris from settling on the electrodes.

6. Cooling System Maintenance

Whichever welder you choose, you must have the cooling system clean. Clogged cooling systems induce overheating. The electrical components of the welder will get ruined by excessive heat.

There may be too much dirt around the cooling systems if the welder turns off randomly while you're using it.

Use the right power input cables with your welder. Using the wiring cables, MIG channel excess heat into the welder and trigger the breakers.

Run your welder in a well-aerated and cool environment to prevent overheating.

We hope that our Lincoln MIG 210 MP Review has been of help to you. Lincoln has created a great MIG welder with the 210 MP. It is easy to set up and use, even for beginners.

The 210 MP produces good welds with little splatter, making it a perfect choice for home projects or light industrial work. If you are in the market for a new MIG welder, the Lincoln 210 MP should be at the top of your list.

# data[].attributes.attachment_link.title
Lincoln MIG 210 MP Review- Is It Worth It? - Welding Magazine

# data[].attributes.attachment_link.description
Our Lincoln MIG 210 MP Review is a guide to help you know whether you should consider buying the welder. Lincoln is a household name where welder manufacturing is a concern. The company has a catalog of welders to rival the best machine makers in the market.

# data[].attributes.body
Ranked 1st in the category of best multi-process Welders in 2022

# data[].attributes.attachment_link.provider_name
WeldingPros - Welding Career Guide, How To and Gear Reviews

# data[].attributes.attachment_link.readable_text
There might be affiliate links in this post. Buying through them can earn us a small commission at no cost to you. This covers our wages and keeps our resources free to use.

Last Updated on:

Wouldn't it be great if you could buy one welder that can do all types of welding? You might have heard that Lincoln 210 mp is a MIG welder that fits the description.
Well, it almost is...
This Lincoln machine is certainly the best MIG/TIG/Stick welder for home use on the market today.

It has great features and a super easy-to-use display. But it also has some minor but important drawbacks.

What is Lincoln Power MIG 210 and What is Best For?

It is a portable 4-in-1 welder that has the ability to perform the functions of a MIG, TIG, stick, or flux-cored welder. Depending on the task at hand, you only need to connect the appropriate torch and ground clamp. You then adjust the controls for a welding process that you wish to use on a digital display. Then check your gas connection and you're ready to start welding!

PowerMIG 210 is a multi-purpose welder that can be used for MIG, Stick, Flux, and TIG which makes it more affordable and convenient to own. It is better to own one welder for multiple welding types than to own multiple welders.

Ideal for use in a home workshop, small scale welding, educator or small contractor, and hobbyists. It is useful for light industrial applications, Auto-body work, farm applications, repairs, and maintenance.

It is portable thanks owning to its lightweight and generator compatibility

Intuitive, easy to use digital interface automatically recommends settings for specific welding job types, wire, and material thickness

Features & Specifications Of Lincoln 210 MP

The unit measures 19x10x8x14 inches and weighs just under 40lbs. Its lightweight and compact proportions make it highly portable. The heavy-duty handle at the top makes it easy to lift and move. It features two voltage inputs 120V and 230V.

That means any readily available power supply will provide adequate power to the unit, making it equally valuable to professionals and home users.

The easy to use push-turn digital control mechanism is simple to understand, user-friendly, and reduces setup and use time dramatically. For this reason alone, it has been called the most user-friendly welder in its class. It also has Lincoln's proprietary "Ready, Set, Weld" feature which makes the brand so popular with beginning welders.

A large, easy to read, color display provides useful guidance through the setup procedure. This feature works well with the push-turn controls to allow the user to manage the PowerMIG 210 MP's more advanced capabilities and features. The 210 amps provided make it possible for this machine to handle any but the most demanding welding tasks.

No products found.

Features

Dual Voltage Inputs (120V or 230V).

Large color display with push-and-turn digital controls.

When plugged on 230v:

MIG: Weld up to 5/16 in. mild or stainless steel and aluminum up to 3/16 in. (Spool gun required for aluminum).

Flux-Core works with Self-shielded and Gas shielded wire types.

DC Stick: ( there is no AC mode) Handles up to 5/32 in. stick electrodes.

DC TIG: (again no AC current mode for aluminum) works on Touch Start TIG technology.

Specifications

Input Power: 115/230/1/60.

Rated Output: 120V: 100A/19.0/40% , 230V: 200A/24V/25%.

Input Current: 15A , 14.7A.

Output Range: 120V: 20-140 Amps DC, Max. OCV : 56, 230V: 20-220 Amps DC, Max. OCV : 56.

Wire Feed Speed Range: 50-500 ipm (1.3-12.7 m/min).

Net Weight: 40.00 (18.14 kg).

Dimensions: 14 in x 10.75 in x 19 in.

Solid Wire Size Range: .025 - .035 in (0.6 - 0.9 mm).

Cored Wire Size Range: .035 - .045 in (0.9 - 1.2 mm).

Welding Aluminum with Lincoln Power MIG 210

While it is extremely versatile, you should keep in mind that you cannot use it for ALUMINUM in TIG mode. Aluminum can be welded with MIG + Spool gun. This welder is a "lift ark TIG," which is not as good as the "high-frequency start."

You can't TIG weld aluminum with it because this is a DC welder and you need an AC welder for TIG aluminum welding. You can read more about it here (5 min read).

All of this capability is crammed into a package that is not just small, but sturdy as well. The unit's housing is made of a well-constructed sheet metal shell reinforced by high-impact plastic.

Here is a nice video I found where a representative from Lincoln was asked to explain a little bit more about the features:

Lincoln 210 MP Pros & Cons

Pros

1. Versatility

The first thing experienced welders will notice is the machine's ability to tackle a wide range of welding tasks. It is well suited for a spectrum of professional, hobbyist, and artisan related uses. This welder's second name is versatility.

Performs great as MIG/MAG machine. It can use a wide range of electrodes and has the power to handle them. It's also a decent DC TIG welder with support for foot paddle.

2. Portability

3. Ease of Use

That is not the case with this machine. It plugs in anywhere from the common home outlet to the heavy-duty plugs you find on an industrial job site.

4. Durability

The sturdy and substantial hard plastic handle at the top makes it easy to move around for almost anyone. Lincoln Electric tests its welding machines rigorously to ensure durability and longevity. At pipeline work on the field, we torture these welders. We drop them out of a truck, they were sitting uncovered on the rain or covered in the snow... and still, they work like a clock.

Cons

1. Price

While this rough and ready little welder might come close to perfection with its many features, those features don't come cheap. The Lincoln PowerMIG 210 MP does come at a relatively high price point when compared to similar machines in its class.

At the time of this writing, the Lincoln 210mp is sold for about fourteen hundred dollars.
That's a lot of money for anyone who does not intend to use it for purposes.

But on the other side, consider buying separately a MIG welder, Stick welder, and TIG machine. Looking at it that way price becomes more reasonable.

2. No AC Current Mod for Aluminum

Welding thin aluminum sheets and tubes are a big part of TIG welding. Since this machine runs only on DC current it is unable to do that. TIG welding aluminum is done only on AC current.

3. Lift Arc TIG or Lift Start

Of 3 possible ways to start scratch start, lift start, and high-frequency start. The lift start is somewhere there in the middle. It's not as bad as the scratch start. Your torch will not stick and tungsten will not be left in the weld puddle. But it's 2019 now and these days high-frequency start (which is the best and safest) is preferred on new and expensive TIG welders...

It's Easy To Start Off Properly

Before you get started, set the welder up using the easy-to-use digital interface.

The Lincoln PowerMIG 210 MP also offers more advanced options and settings that are easy to access.

The welder will automatically set all of the welding amps/wire speed, and voltage based upon inputs from you and based on the available power.

The display will show you how the cables should be installed. This makes it perfect if you're a beginner, but also for professionals who want an easy and fast setup.

frequently asked questions (F.A.Q)

1. How do you TIG weld a Lincoln 210 MP?

Connect a 17v magnum TIG torch to the DC negative terminal.

Rotate a selection knob over to a TIG process and press the "select".

Then confirm that the TIG torch is connected and that you are using the 100% argon gas, press continue.

Select a foot pedal if you are using it.

Chouse a tungsten diameter.

Choose material thickness and press continue.

2. How do you weld aluminum with a Lincoln MIG welder(210 MP)?

You are going to need a 100% argon shielding gas and aluminum MIG welding wire. The good thing also is to pick up a welding respirator or at least a dust mask because aluminum welding fumes are dangerous and hazardous.

(Open the doors and windows for the fumes to find the way out.)

Prep and clean the material that you are going to weld and use a little bigger tip on your gun. For example, if your wire is 30⌀ use a tip for 35⌀ wire because aluminum tends to expand when exposed to heat.

3. How can I weld aluminum cheap?

The cheapest way to weld aluminum would be with a blowing torch for brazing and with some aluminum welding rods (filler material).

The Lincoln PowerMIG 210 MP would be more than adequate for metal shop teachers (particularly in Junior High School), and for the hobbyist, as well as for construction contractors who need something versatile and durable for a variety of unpredictable jobs. It is also a great choice for those who expect to do mostly MIG welding, but who might have to do other types of welds on occasion.

You'll appreciate the fact that it does do stick and TIG well, but, it might not stand up to professional standards. For professional welders who do mostly TIG/stick welding, the PowerMIG 210 MP is not the best choice. If you enjoy welding and are willing to pay more than you would for a simple arc welder, then this is a great item to have in the shop, around the house, or in the back of the truck for whatever might come up.

Derek Mason

Hello, I'm Derek. I'm a web designer and a certificate pipe welder. I'm responsible for the technical part of this website and I also write welding blogs about topics that I am more familiar then Adam. Hope that you will like what we do here.

# data[].attributes.attachment_link.title
Lincoln 210 MP Review Powerful Multi-Purpose Welder [2023]

# data[].attributes.attachment_link.description
There might be affiliate links in this post. Buying through them can earn us a small commission at no cost to you. This covers our wages and keeps our resources free to use. Last Updated on: Wouldn't it be great if you could buy one welder that can do all types of welding?

# data[].attributes.attachment_link.title
Baker's Review of Lincoln Power MIG 210 MP

# data[].attributes.attachment_link.title
Lincoln Electric Power MIG 210MP -  Unboxing, Assembly, and First Weld