# data[].attributes.headline
3.1 DESCRIBE THE ROLE WITH A TEAM LAYNG FABRIC MANUALLY

# data[].attributes.subject
3.1 DESCRIBE THE ROLE WITH A TEAM LAYNG FABRIC MANUALLY

# data[].attributes.body
Single Ply is a single layer of fabric generally to make samples

A multiple Ply is a number of fabric layers stacked on one top of other

Stepped Lay is multiple lays in which groups of layers have different lengths generally used for getting best utilization and consumption of fabric.

One Way Cutting is when the fabric is laid the same way up with grain or print pattern running in the same direction. The fabric has to be cut at the end of each ply.

The fact to Face Cutting is when the plies are laid in pairs face to face. The grain or pattern runs in the same direction.

Two Way Cutting is when plies are laid continuously from left to right and right to left without cutting at the end. Most Efficient method of spreading. Cannot be used with grain restrictions or one-directional printed fabric.

# data[].attributes.headline
1.1 FOLLOW SAFE WORKING PRACTICES IN WORK.

# data[].attributes.subject
1.1 FOLLOW SAFE WORKING PRACTICES IN WORK.

# data[].attributes.body
Health and saftey unit. Sewing. https://padlet.com/likacyfeku/qj7p7jsfqmip

# data[].attributes.headline
2.1 EXPLAIN THE CHARACTERISTICS OF A RANGE OF KNITTED FABRICS

# data[].attributes.subject
2.1 EXPLAIN THE CHARACTERISTICS OF A RANGE OF KNITTED FABRICS

# data[].attributes.body
Breathability, weight, drape, durability, softness, construction and whether it is a water-repellent fabric.

# data[].attributes.headline
2.2 EXPLAIN THE CHARACTERISTICS OF A RANGE OF WOVEN FABRICS

# data[].attributes.subject
2.2 EXPLAIN THE CHARACTERISTICS OF A RANGE OF WOVEN FABRICS

# data[].attributes.body
Woven  Characteristics

Woven fabric does not stretch except on the bias. Woven fabric is made up of fibers which run straight at ninety-degree angles to each other

# data[].attributes.body
Work room always when a member of staff is present. when a problem accurse always seek assistance form member of staff.

# data[].attributes.headline
2.3 IDENTIFY FABRICS THAT REQUIRE SPECIAL ATTENTION WHEN LAY PLANNING

# data[].attributes.subject
2.3 IDENTIFY FABRICS THAT REQUIRE SPECIAL ATTENTION WHEN LAY PLANNING

# data[].attributes.body
- stretch fabrics, such as jersey/knitted
- sheer and fine fabrics, such as georgette, silk, chiffon
- printed fabrics, such as striped fabric
- speciality weave fabrics, such as plaid, check, jacquard
- fabrics which are decorated with beading, sequins etc
- fabrics with a pile or nap, such as velvet, corduroy

# data[].attributes.headline
2.4 LIST THE PAPARWORK NEEDED FOR LAY PLANNING

# data[].attributes.subject
2.4 LIST THE PAPARWORK NEEDED FOR LAY PLANNING

# data[].attributes.body
PATTERN
COST SHEET
MESUREMENT AND LAY PLAN SHEET

# data[].attributes.headline
3.2 DESCRIBE THE LAY PLANNING PROCCESS (MANUAL, CAD/CAM)

# data[].attributes.subject
3.2 DESCRIBE THE LAY PLANNING PROCCESS (MANUAL, CAD/CAM)

# data[].attributes.body
Manual.
I lay the fabric and measure the distances and I prepare the way that I will cut the fabrick dipending on what I will cut.
CAD/CAM
Use of specifick equipment.
Input the specifications on the program and that will lay the way of wich the fabrickwill be cut.

# data[].attributes.headline
3.3 SELECT THE CORRENT LAY PLAN FOR (STRETCH,FABRIC,NAP CHECK)

# data[].attributes.subject
3.3 SELECT THE CORRENT LAY PLAN FOR (STRETCH,FABRIC,NAP CHECK)

# data[].attributes.body
Stretch Fabrick.
because it streches we have to let it get the room temperature and pin the patern in order to avoid movement then we can start cutting with a roller cuter in order to avoid movement.
NAP.
In order to achive the best result we must check how tha fabrick shades. and place the pattern according the shading.
Check/Stripes
We must check the pattern in order to place it according the matching of each peach.

# data[].attributes.headline
3.4 DEMONSTRATE AND EXPLAIN HOW TO "MARK IN" ENSURING THE CORRECT POSITIONING AND PLACING OF PATTERNS FOR ECONOMIC USE FOR MATERIAL

# data[].attributes.subject
3.4 DEMONSTRATE AND EXPLAIN HOW TO "MARK IN" ENSURING THE CORRECT POSITIONING AND PLACING OF PATTERNS FOR ECONOMIC USE FOR MATERIAL

# data[].attributes.body
one way lay
two way lay
double lay
single lay
crosswise lay
bias layout
check pints and strips

# data[].attributes.body
INDUSTRY LAY PLAN

# data[].attributes.body
INDUSTRY LAY PLAN

# data[].attributes.headline
3.5 MANUALLY LAY-UP FABRIC WHITHIN TOLERANCE IN ACCORDANCE WITH ORGANISATIONAL RULES, CODE, GUIDELINES AND STANDARDS

# data[].attributes.subject
3.5 MANUALLY LAY-UP FABRIC WHITHIN TOLERANCE IN ACCORDANCE WITH ORGANISATIONAL RULES, CODE, GUIDELINES AND STANDARDS

# data[].attributes.body
Sample form of Cutting Section Standard Operating Procedure is as flows:
Fabrics Relaxation Procedure:
 Spandex fabrics will be relaxed minimum 24 hour making unroll in cutting section.  Relaxation date and time must be recorded. After spreading, will relax 2 hours
before cut.
Before Cutting Procedure:
 Receive marker and quality check by cutting QC.  Fabric Spreading will be done based on Shade chart/Shade grouping provided by fabrics
warehouse.  Spreading report will be made after spreading with related all necessary data.  Spreading Quality check point: -Table marking -Ends -Leaning –Tension -Narrow Goods
Remnants -Counts -Ply High -Marker Placing -Fabric Flaws  Highest lay for woven fabrics is length 14 meter and height 3 inch.
 Lay chart should be maintaining roll wise.  Quality inspector will control quality inspection during fabrics lay.  Cutting spreader man will spread marker after finishing lay.   For stripe and check fabrics, alignment to be correct by using hook, thread.  Before cutting cutter man will attach clamp, Gum tap on the layer.  Shade chart will be hanged during lay.  Cutting Quality check points: -Miss cut –Rugged Cutting –Notches-Matching Plies and
pattern check.

After Cutting Procedure:
 Quality will check every bundle using hard pattern three different position of the
bundle.  Numbering and bundling separation done by following spreading report and identify
each bundle by style, Cutting number, Bundle number, size, Serial number, Shade
number and Parts name.  100% cut panel will be inspected  If any defective panel found, will be replaced from lay chart wise remnants by
following shade and pattern grain line.  Light color bundle will bind with light color string; deep color bundle will bind with
deep color string  Light color Fabrics will be covered by poly in rack or pallet.  Then all cut panels will be ready to delivery in sewing.

# data[].attributes.headline
3.6 IDENTIFY ACCEPTABLE MATERIAL FAULTS AND MARK FOR FUTURE IDENTIFICATION

# data[].attributes.subject
3.6 IDENTIFY ACCEPTABLE MATERIAL FAULTS AND MARK FOR FUTURE IDENTIFICATION

# data[].attributes.headline
Link to Health and safety Unit assignment

# data[].attributes.subject
Link to Health and safety Unit assignment