# data[].attributes.headline
2. my project was hard because I had to do two things at once 

# data[].attributes.subject
2. my project was hard because I had to do two things at once 

# data[].attributes.body
make a circit work while building the lamp.

# data[].attributes.body
4. If i where to do this again I would ask for help and not just stand around waiting for someone to tell me what to do and how to build my circuit. I would also try and not be so frustrated and annoyed at my project.

# data[].attributes.headline
3. in sted of putting the brad in, then tring to connect my wire I fed my wire thrugh the hole and connectit to the brad. :)

# data[].attributes.subject
3. in sted of putting the brad in, then tring to connect my wire I fed my wire thrugh the hole and connectit to the brad. :)

# data[].attributes.body
3. I had to problem solve when I was making my circuit and putting it together because it just was not working out, but I found my mistake, I was taping all the wire edges together instead of putting one wire edge with the light bulb edge and doing the same with the outher side. And  I was mad and frustrated and instead of sitting around I should've asked for help from my classmates.

# data[].attributes.body
4.I would make i different project so  i could try something new that i have never done before because if did the same thing next year i would all ready now hat to do and bulid and were my ciurt goes so that is why i said that.

# data[].attributes.body
1) The day was good for most of the part. The great part was building and all that. The horrible thing that happened was when my light would not light. That is it's job, right? It was so annoying!😓 The problem was fixed when I found out the light BURNT OUT in an hour. 😠
2)The easy part was the building the Radio City Music Hall (Which is what I made). The harder part was the bulb fiasco and the battery would not stay in and on the box like supposed to. Even with electrical tape. It kept sliding in the box all over the place. 😡
3) I had to problem solve for the battery and the light bulb fiascoes.

# data[].attributes.body
Olive it was good and bad.it is good because we get to do it by are selves but it is bad because some kids aren't doing it there mom or dad is.it was esy because we did not billd a vary big thang. we coulde not fiit a swich

# data[].attributes.body
3. My switch did not work so i did not know what to do so re wrap my wire around my pin so then it work i was happy that is how i problem sovled

# data[].attributes.body
1. It was  frustrating for me. Because we were having trouble for our project and I was starting to get mad. It was also exciting for me because I wanted to see if it would work out okay. One more thing it was stressful because it was not working out and I thought the project was going to be a fail.                2. It was hard. It was hard because we kept trying to get our circuit to work but it would not seem to  budge and we needed more hands then just me and Janie. 3. We had to problem solve in a lot of ways. 1. problem was that the buzzer wires were not in the right direction.

# data[].attributes.body
3.My circuit did not work. I tried to do it many times before I got it. It was hard moving the big box around so the circuit did not work so I bildet it out of the classroom so i did not have to move it around.

# data[].attributes.body
1.I felt good and OK  because I was focus.but I had to use a lot of hot glue for my project.2

# data[].attributes.headline
1. I was really frustrated and I was really mad because I could not get all my pieces together and I could not get my circuit to work. 2. The project was really hard and really frustrating because I thought that I would not get my work done in time and I had a little bit of time to work and I had to cut and glue. that was really hard for me because I did not want to mess up my cutting and get out of the lines and I did not want to Mack my lines really curvy and pointy. 3. well I could not get my circuit going and I asked a friend to help me with it and they did. but the other way I did it was I ask friends before I ask the teacher for help but if no one helps me I try to figure it out myself and see if I can do it or not.  but when I do get it to work I be happy about myself and I help other people and see if they need help too. I am very helpful because when I am done with my project I am nice and I help other people who needs help making there circuit work and be successful. 4. I would love to do a pencil alarm  so when people would tack something out of my pencil case the alarm would go off and it would let me know if someone took a pencil out of my pencil case they would be so nerves that they stole someones pencil and they would never do it again. because they know that you have a alarm on there so they know not to take your pencil anymore. so that  how you get someone to not steel your stuff anymore. 

# data[].attributes.subject
1. I was really frustrated and I was really mad because I could not get all my pieces together and I could not get my circuit to work. 2. The project was really hard and really frustrating because I thought that I would not get my work done in time and I had a little bit of time to work and I had to cut and glue. that was really hard for me because I did not want to mess up my cutting and get out of the lines and I did not want to Mack my lines really curvy and pointy. 3. well I could not get my circuit going and I asked a friend to help me with it and they did. but the other way I did it was I ask friends before I ask the teacher for help but if no one helps me I try to figure it out myself and see if I can do it or not.  but when I do get it to work I be happy about myself and I help other people and see if they need help too. I am very helpful because when I am done with my project I am nice and I help other people who needs help making there circuit work and be successful. 4. I would love to do a pencil alarm  so when people would tack something out of my pencil case the alarm would go off and it would let me know if someone took a pencil out of my pencil case they would be so nerves that they stole someones pencil and they would never do it again. because they know that you have a alarm on there so they know not to take your pencil anymore. so that  how you get someone to not steel your stuff anymore. 

# data[].attributes.body
I felt frustrated  because  I tought I was going to fail my proget and then pepole were going to laghaf at me  and then I would have been really enbaresed.At first I was feling really sick.but when I got in to it I was fine and the first curcuit I did was really hard because I did not know what to do so I looked at mrs Guizars.I problom solved when I did not now how to make A curcuit.what I would do diffrent I woud make bresline centerand print alout more

# data[].attributes.body
2.the project was hard and easy but mainly hard because I was sitting trying to figure out how  make my circuit work and I took forever but I finally got some help and I felt good the rest of the way the only bad thing was that I didn't finish in time and I couldn't keep going until  Monday but overall  I got most of my project done.

# data[].attributes.body
2. The project was really hard. Making the circuit was really hard. Also it was crazy in our room. Everyone was walking around the place and being coo coo!!!!!

# data[].attributes.body
2.  The project was really easy because the cirut you only had to do a dcell wire light bulb and swtich and the building and the hot glue i got brun by and the buliding was not hard at all

# data[].attributes.body
1. it was exciting because you can make yore own land mark or design challenge. it took a long time to make my project and fix things in my project . 2. it was easy making my project but hard to make the circuit. 3.my circuit because of my D-cells. 4.I would make it a basket ball arena.

# data[].attributes.body
1.It was good because you got make your thing and the cirut made your project light up and that was really fun about the day.I did the licolin mearol and it was really cool

# data[].attributes.body
1. At first I felt very frustrated trying to make my circuit, but then I got some help from someone and I felt awesome the rest of the way. I also felt mad that I couldn't do my circuit and instead of trying I sorta almost gave up on my project but some friends told me to keep going. Also my friend in Mrs. Sparks class was done and she helped me with my circuit and building everything.

# data[].attributes.body
1. During my light up project i was so excited but it was also nerve racking because it was all of my classmates first time and my first time so i was like all over the place.It was also good because my paper towel rolls where kind of a success because my long white wires where going through my paper towel rolls and when a parent hot glued them down part of my paper towel roll was not sticking to my blue box.2. During my light up project it was in the middle of hard and easy for the working level because i had some struggles in my project because i did not know how to do my circuit but before i got my circuit complete ELLA tried to help then MRS GIUZAR helped me because some of my wires where to long and then i did not know where to put my D-cell.3. I had to problem solve when i covered one of my bras my light did not light up because i think when my electircity was flowing through it stoped because the strong black tap was blocking the electicity but then i untapped and i put my strong black tap on my rubber part of my wire because rubber is a insilater so then i tried that and it worked. If i did another light up project i would do the HOLLYWOOD SIGH!!!

# data[].attributes.body
fun happy and boring😁🙄☺️ . Fun because I didnt have to do much work and insted we did light up project boring  because I had to wait in line for glue A LOT and happy because It is fun seeing what I acomplished.Im not sure how hard or easy it was kinda in the middle because it was hard deciding where my circuit things is gonna go but the rest was not too hard🤩😋 😎3 1 the cars were on the wrong side of the road so i took them off and glued them on the other way 4 im not 100% sure what I would do I was running out of time and kinda rushed so I would probaly take my time more ( a car is hitting a pole)🤯 😬 😰 😱 😳 🤪 😵

# data[].attributes.body
1.I felt kind of frustrated because Moi was stuck on one part 😱 and I felt horrible because my mom said she would bring me home early if i finished by 2:30 and I was stressing so bad that i started to cry 😫, so Mrs. Guizar brought me out into the hallway to talk, and she asked what was wrong, and i said that i couldn't make my rubber band stay on the motor, and then i also said it was because my mom would leave at 2:30 if i didn't finish by then; so she talked *sniff to my mom, and my mom said she would stay until 3:00, but i didn't finish by then, but i got to come home with my mom anyways

# data[].attributes.attachment_link.title
How to Make a Powered Car Very Simple - DIY Electric Mini Car

# data[].attributes.body
1.it was exciting but frusterating and stressing  because it took a long time for my circuit to light up. and it took me a long time to untape the wires and twist and tape tighter but I finally got it. 2. it was hard and challenging because It took a very long time to get it to light up like a hour and a half. 3.the challenging part is that you had to undo the whole circuit and find the problem. 4.probably put my circuit in another place.

# data[].attributes.body
1.my day was good but I was really nervous because I felt like this was gonna be a epic fail. 2. The day of the project I was not easy but it was not hard so somewhere in the middle leaning to hard. some kids say it more easy well the building is easy but the circuit is more challenging.

# data[].attributes.body
1. the day was good for me and I thought that it was very exiting! I had fun making the project but sometimes I got frustrated when my circuit stopped working and we had to find a way to fix it. but besides that, my time with our light up project and making it was good. 2. I think that the project was hard at times, but easy at others. my circuit was hard but the rest of the project was easy. it got hard when the image we printed fit my project wrong and we were not able to cut it. we had to go to the computer lab and print a whole new sheet and change the sizes. 3. we had to problem solve a way to make our circuit work.  at first, our light bulb didn´t work, so we tried a different light bulb and it still didn´t work. then we found out that all of the colored bulbs  didn´t work. only the plain ones worked. 4. if i did this project again I think that I would do a land form. what I made was not as exciting as it could be. we made it fast to make it and felt like we were rushing, even though we were not. a land form takes longer and you have to take your time.

# data[].attributes.body
1.I had a exciting 😛 😜day because i had to problem solve with a pretty hard circuit.😤2. my project was hard😡 and easy😎 at the same time because my circuit was broken when i got back from the computer lab.😫  3.I had to problem solve 🤔. with my circuit.4. if i did this again I would choose a amazing invention.😎😎😎😎😎

# data[].attributes.body
MOLLY ROSENDER

# data[].attributes.body
1. Light Up Project Day was very nerve wracking! We had a lot of trouble building our circuit. It frustrated me at first😠. AVA S. and I finally got our circuit built but then realized that our circuit didn't work! Ava and I tried to fix our circuit but nothing happened! It was super challenging to find out what was wrong. We finally got it to work! 😌  🎉   2. The project was way harder than I thought it would be! The circuit was probably the hardest part! After we built our circuit things got much easier. We only had to decorate and make our invention look more realistic. (It's called, The Lunch Buzzer, if you want to check it out!😎) 3. AVA S. and I had to problem solve when our circuit didn't work out. It turned put that the wires on the buzzer were going the wrong way. 4. If I could redo this project I would probably try to remember which way the wires on the buzzer went so I wouldn't have to rip off the buzzer. I would also have tried to stay calm and it probably would have been done quicker.

# data[].attributes.body
1.It was fun and exciting but I had a few challenges. We got to build and circuit our creations. My challenges were: THE DUMB PAPERCLIPS had wax on them or gloss or something so I had to go through like 6 of them. But we found out and got a working one. My other challenge was cutting the holes for the wires to go through but I got help and it was fine. 2. It was pretty hard because of the challenges before and because I wasn't even sure if the clock worked. 3. We permanently wired the clock to go so we could look at it in some time, for the paperclips I found a working paperclip so it would work, and for the holes I got a little help for the cut and it went fine. 4. I would test my paperclip first and I would test all my stuff so I was COMPLETELY SURE it would work.

# data[].attributes.body
1. I felt like the day went to fast and it was hard and fun. You could make what ever you wont. It was hard to make my circuit at first. It took me half of the whole time. I had a lot of fun doing my light up project

# data[].attributes.body
1.i had fun i was excited but worried at the same time i thought i might not finish. the hot gluing was pretty scary if you got burned it stung for like 10 mins.2 the light up project was not hard at first you make your circuit then build the surrounding at one point i thought that i might not finish but i did and i had a great time 😮😮3. i had to problem solve when my circuit was not working i realized it was when i put my electrical tape around my wire i did not Sucre the wire enough so i had to redo that and that was my problem 4. i would probably make sure i warped my wire good i did my circuit before my building it would have been much easier.😺😸🐼🇺🇲

# data[].attributes.body
1.I felt frusturated with my circit because it would not light and I already hot glued every thing! i tried againbut it didn't work

# data[].attributes.body
1. The day was kind of challenging. I felt unfocused and all over the place. Kids were always calling my name and not waiting their turn.  I felt like some parents did some students circuits. The circuits were the students jobs. I was so thankful that so many parents were here because I could not do that alone. My fingers would have been glued together! 2.