# data[].attributes.body
AHMAD SOLAHUDDIN BIN ABDULLAH
01DEE20F1036

# data[].attributes.body
1)Firstly, the type of wax to make candles is decided. Secondly, the wax is shredded into chucks or shaving. Then, medium or large pot is filled halfway with waten. Next, the wax chucks are placed in a smaller heat-resistant container. After that, the heat is increased and the wax is stirred well. Following that, the scent and oil-based colouring are added into the melted wax. After adding the scent and oil based colouring , the end of the wick is tied around a stick. Then, the melted was is poured into the mould. Next, the wax is coaled for 24 hours. Finally, the stick is removed and the wick is trimmed

2. a) We must wear a pair of glove when to avoid injury when we make the candles.
B ) wearing the mask, because when we melting the wax we can protect our nose from  smells the chemical
c) Use a safety shoes to make sure that we can prevent injury if wax fallen on the feet.

# data[].attributes.body
01DEE20F1047
firstly,  the type of wax is decided to make candle.Then tje wax os shreded into chunks or shavings.Next a medium or large pot is filled halfway with water.Subsequently,the wax chunks are placed in a smaller heat resistant comtainer. Next the heats is increased and the wax stirred well. Later the scent and oil based coluoring is addded into melted wax. After that.,the end of wick around a stick is tied. After wards, malted wax is poured into the mould, then the wax is could for 24 hours. Finally the stick is removed and thined the wick

Safety measures
1•use glove to avoid contact with the material
2•do it in a large area so that the material does not slip
3•wear shoes if the water is destined to be splashed on the feet

# data[].attributes.headline
MUHAMMAD KHAIRUL NIZAM BIN ABDUL MUBIN (01DEE20F1044)        MUHAMMAD NAZMI BIN SAMSUL BAHRI (01DEE20F1032)

# data[].attributes.subject
MUHAMMAD KHAIRUL NIZAM BIN ABDUL MUBIN (01DEE20F1044)        MUHAMMAD NAZMI BIN SAMSUL BAHRI (01DEE20F1032)

# data[].attributes.body
1)Firstly, the type of wax is decided to make candles.Then, the wax is shreded into chunks or shavings.Next, a medium or large pot is filled halfway with water.Subsequently, the wax chunks are placed in a smaller heat-resistant container.Next, the heat is increased and the the wax stirred well.Later, the scent and oil-based colouring is added into melted wax.After that, the end of the wick around a stick is tied.Afterwards, melted wax is poured into the mould.Then, the wax is cooled for 24 hours.Finally, the stick is removed and trimed the wick.

2)3 safety measures which are related to the produre above .

1.We should wear gloves to avoid our hand get harm.

2.We should be careful when using the shredder.

3.We should wear mask to avoid odour the chemical from the wax chunks.

# data[].attributes.headline
Nor Fadslul Hakimi Bin Norzaidi(01DEE20F1028)

# data[].attributes.subject
Nor Fadslul Hakimi Bin Norzaidi(01DEE20F1028)

# data[].attributes.body
Firstly, the type of wax is decided to make a candles. Second, the wax is shredded into chunks or shavings. Beside that, a medium or large pot is filled halfway with water. After that, the wax chunks are placed in a smaller heat-resistant container. Beforehand, the heat and stir the wax well are increased. Before that, the scent and oil-based colouring are added into melted wax. Next, the end of the wick around a stick is tied. Following that, the melted wax is poured into the mould. Subsequantly, the wax is cooled for 24 hours. Finally, the stick and trim the wick are removed.

Safety Measures
Firstly, wear mask when do the melting process because  its material is made of chemicals.
Second,wear gloves when handling hot items to avoid injury. Finally,wear gloves when handling hot items to avoid injury.

# data[].attributes.body
AHMAD SOLAHUDDIN BIN ABDULLAH
01DEE20F1036

# data[].attributes.headline
MUHAMMAD DAINIAL HAIKAL BIN SHAHRUL RIZAL 01DEE20F1050

# data[].attributes.subject
MUHAMMAD DAINIAL HAIKAL BIN SHAHRUL RIZAL 01DEE20F1050

# data[].attributes.body
Firstly, the type
of wax to make
candles is decided.
Second, the wax is
shredded into chunks
or shavings.
Next , a medium or
large pot is filled
halfway with wafer.
Then, the wax chunks
are placed in a
smaller heat-resistant
container.
Subsequently, the
heat is increased and
the wax is stirred
well. Continue, scent
and oil-based
colouring are added
into melted wax.After that ,the melted wax is poured into the mould. Meanwhile, the wax is cooled for 24hours . Finally,the stick is removed and the wick is trimmed.

Safety measures
1.Wear mask when do the melting process because its material is made of chemicals
2.wear gloves when handling hot items to avoid injury
3.wear gloves when handling hot items to avoid injury

# data[].attributes.body
01DEE20F1038

# data[].attributes.headline
MUHAMMAD MUZAKKIR BIN AZLAN (01DEE20F1039)

# data[].attributes.subject
MUHAMMAD MUZAKKIR BIN AZLAN (01DEE20F1039)

# data[].attributes.body
1)

First, the type of wax is decided to make candles. Secondly, the wax is shredded into chunks or shaving. Then, a medium or large pot is filled halfway with water .Next, the wax chunks are placed in a smaller heat –resistant container. After that, the heat is increased and the wax is stirred well. Subsequently, the scent and oil-based colouring are added into melted wax. After adding the end of wick is tied around a stick. Following that, the wax is cooled for 24 hours. Lastly, the stick is removed and the wick is trimmed.

2)

i) we should wear glove to avoid injury from hot mixture.

ii) we should make sure the tools are in good condition and functioning well.

iii) we should stir the wax carefully to avoid the wax spills or splashes .

# data[].attributes.body
NUR ATHIRAH BINTI MOHD SHUKRI 01DEE20F1033

Firstly, the type of wax is decided to make the candles. Then, the wax is shredded into pieces or shavings. Next, a large or medium pot is filled halfway with water. Then, the wax chunks are placed in a smaller heat-resistant container. Next, the heat is increased and the wax is stirred well. After that, the melted wax are added with the scent and oil-based coloring. Next, the end of the wick is tied around a stick. Subsequently , the melted wax are poured into the mould. Then, the wax is cooled for 24 hours. Finally, the stick is removed and the wick is trimmed .

Safety measures
1) wearing gloves and handle the container carefully after the wax were heated to avoid burning your hands
2) increased the heat slowly to avoid the wax from burning
3) wearing a mask, because when melting the wax the air may contain chemicals.

# data[].attributes.body
01DEE20F1030

# data[].attributes.body
AL AMIN BIN ANOR IDRIS(01DEE20F1034)

Firstly,the type of wax is decided to make candles.Secondly,the wax is shreded into chunks or shavings.Next,medium or large pot are filled halfway with water.After that,the wax chunks are placed in a smaller heat-resistant container.Then,yhe heat is increased and the wax is stirred well.Subsequeantly,the scent and oil based colouring are added into the melted wax.Futhermore,the end of the wick is tied around a stick.Then,the melted wax is poured into the mould.After that,the wax is cold for 24 hours.Finally the stick is removed and trimmed the wick.

Safety measured
1. Carefully when shred the wax into chunks.
2. Wear gloves while handling the hot mixture to avoid skin contact with hot container.
3. Wear mask to avoid chemical odour.

# data[].attributes.headline
Muhammad wafiq bin zahari (01DEE20F1043) MOHAMAD ALLIF BIN AZNAN (01DEE20F1054)

# data[].attributes.subject
Muhammad wafiq bin zahari (01DEE20F1043) MOHAMAD ALLIF BIN AZNAN (01DEE20F1054)

# data[].attributes.body
Firstly, the type of max to make candles is decided. Secondly, the max must to shred into chunks or shaving. After thet, filled up a water halfway in a medium or large pot. Then the max chunks are placed in a smaller heat-resistent container. Subsequently, the heat is increased and the max is stirred well. After that, the scent and oil baced colouring are added into melted max. Then, the end of the wick is tied around a stick. Last but not least, the melted max is poured into the mould and cool the wax for 24 hours. Finally, the stick is removed and the wick is trimmed

2. Safety Measures
1. Wear the gloves to avoid any contact of the chemicals and the sharper object with hand.
2. Wear the mask to avoid the wax smells into your nose.
3.Use the right amount of fire consumption to reduce the smoke when heat and stir the wax

# data[].attributes.headline
MUHAMMAD ALIF AMRY BIN ROSDI (01DEE20F1052)

# data[].attributes.subject
MUHAMMAD ALIF AMRY BIN ROSDI (01DEE20F1052)

# data[].attributes.body
Firstly , the type of wax to make candles is decided.Secondly,the waq is shredded into chunks or shaving .Next ,medium or large pot is filled halfway ith water.Then ,the wax chunks are placed  in a smaller heat-resistant container.After that ,the heat is increased and the wax is stirred well.Subsequently,the scent and oil based colouring ,the end of the wick is tied around a stick.Then the melted was is poured into the mould .Next ,the wax is cooled for 24 hours .Finally, the stick is removed and the wick is trimmed .

SAFETY MEASURES
1)we need wear a glove to prevent injury from the hot mixture.
2)we must use suitable container to avoid it overflow out.
3)wear mask when make the melting process because this material made of chemicals.

# data[].attributes.headline
MUHAMMAD SYAFIQ BIN SAI-FULAHK (01DEE19F1129)

# data[].attributes.subject
MUHAMMAD SYAFIQ BIN SAI-FULAHK (01DEE19F1129)

# data[].attributes.body
Firstly, the type of wax to make candles is decided. Secondly, the wax is shredded into chunks or shaving. Next, medium or large pot is filled halfway with water. Then, the wax chunks are placed in a smaller heat-resistant container. After that, the heat is increased and the wax is stirred well. Following that, the scent and oil based colouring are added into the melted wax. After adding the scent and oil-based colouring, the end of the wick is tied around a stick. Then, the melted was is poured into the mould. Subsequently, the wax is cooled for 24 hours. Finally the stick is removed and the wick is trimmed.

SAFETY MEASURES
1. Choose a well-ventilated work area while you are making homemade candles to avoid injury.

2. Never leave melting wax unattended to prevent the result of melting the wax from overflowing out.

3. Use gloves during the work process to avoid injury to the hands if the wax liquid comes into contact with the skin surface of the hands.

# data[].attributes.body
1.      Firstly, the type of wax to make candles is decided. Then, the wax is shredded into chunks or shavings. After that, a medium or large pot is filled halfway with water. Then, the wax chunks are placed in a smaller heat-resistant container. Subsequently, the heat is increased and the wax is stirred well. After that, scent and oil-based colouring are added into melted wax. Later, the melted wax is poured into the mould. Next, the wax is cooled for 24 hours. Finally, the stick is removed and the wick is trimmed.

2.    (i)We should wear glove to prevent injury from the hot mixture.

(ii)We should wear a mask to prevent the odour or awful smell from the chemical.

(iii)We should ensure the tools that we need to use are in a good condition and use the tools   in a correct way carefully to prevent the risk of accident happen.

# data[].attributes.headline
MUHAMMAD AZAMSYAABAN BIN MD HUSNI (01DEE20F1040)

# data[].attributes.subject
MUHAMMAD AZAMSYAABAN BIN MD HUSNI (01DEE20F1040)

# data[].attributes.body
Firstly,the type of wax to make candles is decided.Second,the wax is shredded into chunks or shaving.Next, medium or large pot is filled halfway with water.After that,the wax chunks are placed in a smaller heat-resistant container.Then,the heat is increased and wax is stirred well.Continue,the scent and oil-based colouring are added into melted wax.Later,the wax is cooled for 24 hours.Finally,the stick is removed and the wick is trimmed

SAFETY MEASURES
1.carefully and wear glove when using the chunks and shaving to avoid injuries
2.use a low fire fro, burning the candle
3.wear a mask to prevent the odour

# data[].attributes.headline
MOHAMAD HAZIQ IKMAL BIN SAAD 01DEE20F1048

# data[].attributes.subject
MOHAMAD HAZIQ IKMAL BIN SAAD 01DEE20F1048

# data[].attributes.body
Firstly, the type of wax is decided to make candle. Secondly, the wax is shredded into chunks or shavings. Then, the medium or large pot is filled halfway with water. Subsequently, the wax chunks is placed in a smaller heat-resistant container and the heat are increased while the wax is stir well. After that , a scent and oil-based colouring into melted wax are added. Next, the end of the wick is tied around a stick. Furthermore, the melted wax is poured into the mould and cool the wax for 24 hours. Finally, the stick is removed and trimed the wick.

Safety Measures.
1. Wear a mask to reduce toxic chemical smells .

2. Do this activities at free space to avoid form any danger such as fire burning.

3. Stir the wax carefully and slowly to prevent from mixed wax spilling down.

# data[].attributes.body
01DEE20F1051
Firstly, the type of wax to make candles is decided. Next, medium or large pot is filled halfway with water. After that, the wax chunks is placed in a smaller heat resistant container. Then, the wax is increased the heat and stir well. Next , the scent and oil-based calouring are added into melted wax . After that, the end of the wick is tired around a stick. Subsequently, the wax is cooled for 24 hours. Finally , the stick is removed and the wick is trimmed.
SAFETY MEASURES
-use glove to do it this because he can protect hand from being injured
-use the safety boot to protect our legs from this wax

# data[].attributes.headline
NUR ELLIANA BINTI DASIMAN (01DEE20F1031)

# data[].attributes.subject
NUR ELLIANA BINTI DASIMAN (01DEE20F1031)

# data[].attributes.body
The type of wax is decided to make candles.Second, the wax us shreded into chunks and shavings.After that, a medium or large pot is filled halfway with water. The, the wax chunks are placed in a smaller hest-resistant container. Afterwards the heat is increase to stir the wax well. By the time, the scent and oil-based colouribg is added into melted wax. Meanwhile, the end of the wick is tied around a stick. Next, the melted wax is poured into the mould. Later, cool the wax for 24 hours. Lastly, the stick and trim the wick is removed.

SAFETY MEASURES
1.Use the chunks or shavings carefully to avoid injuries occured.
2.Use a small fire to avoid candle burning.
3. Carefully pour the melted wax because it hot.

# data[].attributes.body
Firstly, the type of wax is decided to make candles. Secondly, the wax is shared into chunks or shavings. Then, a medium or large pot are filled halfway with water. After that, the wax chunks is placed in a smaller heat-resistant container. Next, the wax is increased the heat and stir well. Then, the scent and oil-based coloring are added into melted wax. The end of the wick is tied around a stick. Furthermore, the melted waxed is poured into the mould. The waxed is cold for 24 hours. Finally, the stick is removed and trimmed the wick.

Safety measures.

1. Choose a well-ventilated work area while you are making homemade candles to avoid injury.

2. Never leave melting wax unattended to prevent the result of melting the wax from overflowing out.

3. Use gloves during the work process to avoid injury to the hands if the wax liquid comes into contact with the skin surface of the hands.

# data[].attributes.headline
THAYALAN NAIR A/L KUMARAN 01DEE19F1107
SHAKTHISWAREN A/L THIRUSELVAN 01DEE19F1124

# data[].attributes.subject
THAYALAN NAIR A/L KUMARAN 01DEE19F1107
SHAKTHISWAREN A/L THIRUSELVAN 01DEE19F1124

# data[].attributes.body
Firstly, the type of wax to make candles is decided. Secondly, the wax is shredded into chunks or shaving. Next, medium or large pot is filled halfway with water. Then, the wax chunks are placed in a smaller heat-resistant container. After that, the heat is increased and the wax is stirred well. Following that, the scent and oil based colouring are added into the melted wax. After adding the scent and oil-based colouring, the end of the wick is tied around a stick. Then, the melted was is poured into the mould. Subsequently, the wax is cooled for 24 hours. Finally the stick is removed and the wick is trimmed.

SAFETY MEASURES
1.Don't use food coloring or crayons for dyeing your wax.
2.Don't try to freeze the candle to speed up the curing process.
3.Don't pour your wax into the candle container while it is hot.

# data[].attributes.headline
NAME: LOO HUI KIE(01DEE20F1041)          Firstly, the type of wax to make candles is decided. Secondly, the wax is shredded into chunks or shaving. Next, medium or large pot is filled halfway with water. Then, the wax chunks are placed in a smaller heat-resistant container. After that, the heat is increased and the wax is stirred well. Following that, the scent and oil based colouring are added into the melted wax. After adding the scent and oil-based colouring, the end of the wick is tied around a stick. Then, the melted was is poured into the mould. Subsequently, the wax is cooled for 24 hours. Finally the stick is removed and the wick is trimmed.                               2. i. Wear glove and be careful when handling the hot mixture so that it won’t spill on our hand    ii. Wear mask during the melting process because the was might contain some harmful chemical                               iii. Keep an eye on the melting process of the wax so that the wax didn't burn due to high temperature.

# data[].attributes.subject
NAME: LOO HUI KIE(01DEE20F1041)          Firstly, the type of wax to make candles is decided. Secondly, the wax is shredded into chunks or shaving. Next, medium or large pot is filled halfway with water. Then, the wax chunks are placed in a smaller heat-resistant container. After that, the heat is increased and the wax is stirred well. Following that, the scent and oil based colouring are added into the melted wax. After adding the scent and oil-based colouring, the end of the wick is tied around a stick. Then, the melted was is poured into the mould. Subsequently, the wax is cooled for 24 hours. Finally the stick is removed and the wick is trimmed.                               2. i. Wear glove and be careful when handling the hot mixture so that it won’t spill on our hand    ii. Wear mask during the melting process because the was might contain some harmful chemical                               iii. Keep an eye on the melting process of the wax so that the wax didn't burn due to high temperature.

# data[].attributes.body
QUESTION1
Firstly, the type of wax to make candles is decided. Subsequently, the wax is shredded into chunks or shavings. Next, Water is filled halfway into a medium or large pot. After that,  the wax chunks are placed in a smaller heat-resistant container. Next, the heat is Increased and the wax is stirred well. Continue, the scent and oil-based colouring are added into the melted wax. Subsequently,  the end of the wick is tied around a stick. After that, melted wax is poured into the mould. Then, the wax is cooled for 24 hours. Lastly, the stick is removed and the wick is trimmed.

QUESTION2 (Safety Measures)
1. Be careful by wearing glove while handling the hot mixture to avoid the wxcessive damage to skin while the mixture spill.
2. We should use small amounts of fire during the melting process because wax is a carbon compound that has a low melting and boiling point it might cause burning if excessive temperature.
3. Wear face mask during melting process to avoid the harmful taxic chemical substances inhale into body.

# data[].attributes.headline
NURUL HAQIMAH BINTI AB.RAHMAN(01DEE20F1049)  RAUDHAH BINTI ABDUL RAHIM(01DEE20F1042)

# data[].attributes.subject
NURUL HAQIMAH BINTI AB.RAHMAN(01DEE20F1049)  RAUDHAH BINTI ABDUL RAHIM(01DEE20F1042)

# data[].attributes.body
1.Fistly,the type of wax is decided to make candles.Next, the wax is shred into or shavings.Then,a medium or large pot are filled halfway with water.After that,the wax chunks is placed in a smaller heat-resistant cointainer.Next, the wax is increased the heat and stir well.Then,the scent and oil-based colouring are added into melted wax. subsequently,the end of the wick is tied around a stick.Futhermore,the mealted wax is poured into the mould.In addition,the wax is cold for 24 hours.Finally, the stick is removed and trimmed the wick. 2.a)We must wear a gloves to avoid injuries when heated the wax. b)We must wear a suitable cointainer to avoid it overflow out. c)We must be careful when handling the wax being heated.