# data[].attributes.body
More prints using a different color. Yellow.

# data[].attributes.body
Added a background to the print using water colors and Saran Wrap.

# data[].attributes.body
The first prints came out all right but the last three started to become faded and all the ink didn't end up coming through. This was later fixed by re taping around and creating a better suction which ended up being the problem.

# data[].attributes.body
These were the best four prints that came out from doing the reduction prints. Starting this project I had no idea where to start but the written instructions helped a lot. I started out using the hand press and the prints weren't coming out very well. Eventually switched over to the vander cook which is where these prints came from and it ended up working a lot better.

# data[].attributes.body
Single print that I made after refining and cutting out the unwanted parts to my stamp.

# data[].attributes.body
Second stamp I made on the last day. Didn't turn out quite how I wanted but still think it looks good.

# data[].attributes.body
first attempt at an offset print. Easier to use a brighter color before with the black on top.

# data[].attributes.body
Used my soccer ball stamp as well as the white styrofoam to create a net and the rubber bands and expertise mats for the "grass"

# data[].attributes.body
First attempt at tiled print using only black on the soccer ball.

# data[].attributes.body
Used both the tiling and offsetting in combination with each other.

# data[].attributes.body
Other attempts at trace prints that didn't turn out as well as I had hoped.

# data[].attributes.body
First boat and print in this style that I did. Ended up turning out better than the second attempt in which I tried to add more chatter.

# data[].attributes.body
Second print with a background created using tissue paper. Doesn't match the color scheme of the camel but I still think it turned out well. More detailed than the first trace print I did with this kind of background.

# data[].attributes.body
Used tissue paper to add a background to the print. Tried to pick colors that matched the actual fish.

# data[].attributes.body
Second attempt at doing this image. On the second attempt added more detail to the body and a little bit more chatter to the image.

# data[].attributes.body
First attempt at mono printing . Using water color the colors tended to mix with the black outline. Could have either been fixed by using a different combination of colors or as I found out later could have been using the soap that was applied before painting.

# data[].attributes.body
The colors ended up being better in this one. They didn't blend together as much. Could have possibly pressed harder with the hand press.

# data[].attributes.body
Second attempt at the flag this time I painted the image mirror of from what was printed to get it to not be reverse on the paper.

# data[].attributes.body
Second attempt at doing this image found that it worked better to not use the soap with the oil. First attempt the colors blended all together. This print ended up working out a lot better. Colors are a little faded but could just be error using the press.

# data[].attributes.body
Turned out relatively well except I forgot that the prints are mirrors of what is printed onto the plate. Colors turned out better than previous prints in terms of not being faded. x