# data[].attributes.attachment_link.title
VEX IQ Challenge : Bank Shot | 2015-2016 Game

# data[].attributes.attachment_link.entities[].name
Defeat Monster Spider and Giant Centipede

# data[].attributes.attachment_link.description
With hard work and determination, Team Skyhawk won the VEX Worlds Robotics Championship.

# data[].attributes.headline
I saw this video on www.vexrobotics.com and watched it and it is so funny.

# data[].attributes.subject
I saw this video on www.vexrobotics.com and watched it and it is so funny.

# data[].attributes.attachment_link.description
Our robots got spooky this Halloween! Check out this group of VEX IQ robots built, choreographed and programmed to perform an original dance sequence to the iconic song "Thriller". These robots were built with VEX IQ Super Kits and can be found here, http://www.vexiq.com/kits-bundles.

# data[].attributes.body
1.The highlights of making Vex for me is that we took our claw off for the Vex competition. 2. I liked when we had the Vex competition because we were all interacting with each other and we had another class come and see our Vex competition and our principal and vice principal came to see our Vex competition.3. We had a fun experience making Vex and the fun moments in the process of making Vex.4. While making Vex we had lots of fun moments and silly moments and lots of sad moments.5.I can't wait  for you to read everything in our blog because it is a tun of fun to make and blog about.I think you would like playing around with Vex to because it is a lot of fun to build and play and drive around the class room and see all the people with their Vex enjoying what they are doing . By Keegan

# data[].attributes.body
Hello. Today I am going to write about the challenges of making vex. First, of all, one of the challenges  when I was making Vex with my partner Keegan, is when we had to attach the wheels. We had to find the right silver rod to put into the wheels so they can move, and we had to put the big wheels at the back and the small wheels in the front. Next, there was another instruction that did not make sense. We had to attach a the wires to the right wire hole . Which was a bit confusing. because there had to be the right wire in the right wire hole.
Then, when we first started Vex the instructions were not really clear. there was a sheet which had the real sizes in everything, but it was really hard to find in the Vex bucket. Finally, there was a this last instruction, about how to attach the claw. I got to say it was really hard, because putting gears into a silver rod is really hard. At the end we got everything worked out. if you like my paragraph about the challenges please comment below
Thank You,! sincerly, Tenten Mavima

# data[].attributes.body
Here is a wishlist of materials that we wish our Vex came with or improvements that could be made. Our first wish is that the wires are easier to put in because if you have big hands it's hard to put them in. The second thing that we wish for is that the instructions were more clear on the size of the pieces. This is because if you put different sizes in one bag, it's like finding a needle in a hay stack. The third thing we wish for is that the instructions were more clear in the instructions book because it is hard to count all of the pegs when they are so small . The last thing that we wish for is more vex pieces because there is not enough pieces to build a better vex. In summary, I hope you agree with our group's wishes. Comment down below if you think that there are other wishes and don't forget to comment on everything else.
By: Thomas

# data[].attributes.body
We did not need our vex claw because it was getting in the way of testing our pulley so we took it apart, because we did not want the same thing to happen on the actual contest. And then added the ex pieces of our claw to the back of our vex, to make it more stable when it moves.

# data[].attributes.body
Hi. My name is Thomas. I'm in grade 4 and we're doing a pulley system for Vex robotics. We are group 1 out of 6. We are making a pulley system and we are entering a challenge. We want to be the Vex group that makes it to the Halton skills competition. There is only going to be one team and I know it will be us, group number one!

# data[].attributes.body
we added a few stuff to our vex and now it is soooooooooo cute!!!!!!!!

# data[].attributes.body
The upgraded pulley is a huge success. It can lift up 30 penny's. And I got to say that is a lot of penny's to win the
COMPETITION!!!!!!! The competition is on Friday February 10 2017

# data[].attributes.body
Hi :) My name is Tenten and I am in grade four. Right now we are blogging about our pulley and vex robotics adventure. We convinced our principal to buy us 6 Vex robots, and he did. So now we have to enter a competition, but to choose a robot to go to the competition we have to make a pulley system to see which vex can pick up the most penny's. The winner gets there vex to be in the competition.

# data[].attributes.body
Hello my name is Keegan I am in grade four working on a Vex Robotics Project. Right now I am working on my blogging project. We are making pulleys for science. Our teacher calls it the pulley challenge. What we will be blogging about is our Vex and our pulley challenge plus upgrading our pulley on our Vex adventure.

# data[].attributes.body
The pulley we made before was good but was not good enough. So we took apart the pulley and made a new one which worked much better because we  have four gears .The last pulley we only three gears and many pulleys less weight.

# data[].attributes.body
This is the vex IQ. Claw bot. The original robot before

# data[].attributes.body
Before we had Thomas in our group it was just Keegan and Tenten and we made the whole robot before Thomas came in our group. !!!

# data[].attributes.body
Hello. Our names are Tenten (the one in the black and red sweater), Keegan (the one with the white shirt), and Thomas (the one in the grey, blue and black hat) and this is our vex blog =)

# data[].attributes.body
Before we made our pulley Keegan started fiddling with some of the extra vex parts that we had, then he made a pulley. The pulley is called a compound pulley. A compound pulley is a pulley with many gears. The many gears helps the load get lighter for the person who is pulling it. many pulleys less weight!!!

# data[].attributes.body
Before we upgraded our pulley this is how it looked like this.

# data[].attributes.body
Us playing around with our Vex Robotics pulley system!!!