# data[].attributes.body
At least 5 mL of liquid is required. Don't forget boiling chips.

# data[].attributes.body
1. Set up a ring stand with distillation apparatus.
2. Start boiling.  Record the temperature every minute.
3. When the first plateau starts to end, switch the collecting tube with an empty one.
4. When the second plateau begins, switch the tube with another empty one.
5. Once finished, discard the second tube's contents.  Test the first and third fractions.

# data[].attributes.body
At least 1/2 cm of powder is required.

# data[].attributes.body
1. Mass the evaporating dish before pouring the solution in.
1. Set up a ring stand with an evaporating dish.  The solution should be inside the dish.
2. Start boiling.  Check through the looking glass to see if all the solvent evaporated.
3. Once all the solvent is gone, mass the remaining solute in the evaporating dish. Calculate the mass of the solvent.

# data[].attributes.body
You don't have to do every test to identify all the plastics.

# data[].attributes.body
This applies to substances AND information.

# data[].attributes.body
Hit the minimum, but don't stop there.  Impress yourself by making your Padlet more personalized.

# data[].attributes.body
1. Fill a capillary tube with the substance. Attach it to the end of the thermometer with a rubber band.
2. Put the thermometer in a beaker of water.
3. Start heating.  Record temperatures every 30 seconds. Make sure to watch

# data[].attributes.headline
In case the substance doesn't melt under 100 degrees Celsius . . .

# data[].attributes.subject
In case the substance doesn't melt under 100 degrees Celsius . . .

# data[].attributes.body
Use an evaporating dish instead of a capillary tube, since the dish will reach higher temperatures.
DISCLAIMER: If the substance turns black while melting, you have DECOMPOSED it, and there is NO RECOVERY.  Make sure not to use ALL of your substance when melting.

# data[].attributes.body
BUBBLES is the only validation of a reaction, since there is a chemical reaction going on. No melting or subtle color changes.

# data[].attributes.body
You only do density TWICE when you come down to a name.

# data[].attributes.body
Even if you have an idea on what substance you have, do all of the tests so you can match up the information.

# data[].attributes.body
Rainbow!

# data[].attributes.body
Rainbow!
Rainbow!

# data[].attributes.body
Rainbow!
Rainbow!
Rainbow!

# data[].attributes.body
Rainbow!
Rainbow!
Rainbow!
Rainbow!

# data[].attributes.body
Rainbow!
Rainbow!
Rainbow!
Rainbow!
Rainbow!

# data[].attributes.body
Rainbow!
Rainbow!
Rainbow!
Rainbow!
Rainbow!
Rainbow!

# data[].attributes.body
Rainbow!
Rainbow!
Rainbow!
Rainbow!
Rainbow!
Rainbow!
Rainbow!

# data[].attributes.body
Rainbow!
Rainbow!
Rainbow!
Rainbow!
Rainbow!
Rainbow!
Rainbow!
Rainbow!

# data[].attributes.body
Rainbow!
Rainbow!
Rainbow!
Rainbow!
Rainbow!
Rainbow!
Rainbow!
Rainbow!
Rainbow!