# data[].attributes.body
Hi Letasha, the left and right side of the base are not parallel. The base of your display unit does not seems to be able to see through from the bottom. A small part of thickness of material is added wrongly to the backing.

# data[].attributes.body
Kevan's Other Hand Plus Kevan's Hand

# data[].attributes.body
yogita sec sketch

# data[].attributes.body
yovelle's second sketch

# data[].attributes.body
2nd sketch

# data[].attributes.body
Hi Kyler, the 30o lines on the right side of the base are not parallel. Why are there 2 slanted lines at the front and back of the base. The horizontal edge of the backing is not 30o. The number of grid lines used to draw the 3D shape is inaccurate. There is no thickness of material for the backing.

# data[].attributes.body
Hi Kevan, the lines of the crate should be drawn in lighter tone. The base of your display unit does not seems to be able to see through from the bottom. The left side of the backing is longer than the right sidgThe thickness of the material for the backing is not drawn.

# data[].attributes.body
Hi Ying Zhi, part of your sketching is cropped! The shape of your backing is wrong. You are drawing the unwanted area as the backing, instead of the wanted area. The left side of the base is longer than the right side, and they are not parallel to each other. The width of the base is shorter than 4 parts of its height.

# data[].attributes.body
Hi Rui Yong, the left side of the base is longer than the right side of the base, as such, it looks out of proportion. The base of your display unit does not seems to be able to see through from the bottom. The 3D shape does not really resemble the 2D shape as the grid lines drawn are not parallel and the 3D shape is not drawn following 2D shape on the grid lines.

# data[].attributes.body
Hi Asher, the width of your base is less than 4 parts of its height, as such it looks out of proportion. The base of your display unit does not seems to be able to see through from the bottom. The shape of your backing is not centralised, it is more to the right side. The thickness of the backing is uneven, though it is quite accurate. Certain part of the thickness for the backing is missing.

# data[].attributes.body
Hi Ethan Tan, the left side horizontal edge is more 30o above the horizontal edge, as such, your sketching looks slanted. The left side of the base is slightly longer than the right side. The grid lines drawn to guide you for the drawing the shape for the backing are not parallel, thus, the 3D shape does not really resemble the 2D shape. Certain part of the thickness of material for the backing is missing.

# data[].attributes.body
Hi Ezer, part of your sketching is cropped! The length of the base is shorter than 6 parts of its height, as such, it looks slightly out of proportion. The thickness on the right side of the base should not be visible. Certain thickness of material for the backing is inaccurate.

# data[].attributes.body
Hi Fan Yi, the left side of the base is shorter than the right side, as such, it looks slightly out of proportion. Certain part is missing the thickness of material. The actual line of on the right side of the backing should be darken.

# data[].attributes.body
Hi Bryan, the vertical edge of the backing is not vertical, as such, it looks like it is falling backward. The lines of the crate should be drawing in lighter tone and the thickness on the right side of the base should not be visible. There is also no thickness of material added to the backing.

# data[].attributes.body
yovelle's sketch

# data[].attributes.body
Hi Yovelle, the left side and right side of the base is of different length, this makes it looks out of shape. There is no thickness of material for the backing. The height of the backing should be of the same width of the base.

# data[].attributes.body
Hi Si Hui, the left side and right side of the base are not parallel. The height of the base at the front is also different from the back. The thickness of the base is uneven. Certain part of the thickness for the backing is missing.

# data[].attributes.body
Hi Katriel, your isometric sketching is well-done, except that it is too small. The bottom of the base is not drawn parallel to its top. The thickness for both the backing and base are draw evenly, good job done!

# data[].attributes.body
Hi Yogita, the length of the base is slightly shorter than 6 parts of its height. The thickness of the backing is inaccurate. Certain part of the thickness for the backing is missing.

# data[].attributes.body
Hi Hui En, the front of the base is shorter than the back,as such, the left side of the base is not parallel to the right side. The length of the base is much longer than 6 parts of its height. The thickness of the backing is inaccurate, and certain part of the thickness is missing.

# data[].attributes.body
Hi Christalbel, your isometric sketching is very well-done! The only thing that you can improve on, perhaps is the backing, the right vertical edge is not so 'vertical', and the thickness of the backing, you could try to sketch it more evenly.

# data[].attributes.body
Hi Nathalie, the length of the base is much longer than 6 parts of its height. Likewise, the width is much longer than 4 parts of its height. There is also not thickness of material for the backing.

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: ___No___________________________
If your answer to the above is 'no', explain which part can be improved.
Ans:  The two lines at the end was not the correct angle and the curve in the middle of the heart was not as deep as the orginal sketch. ___________________________________________________________________________________________________________________________________________________________________________________________b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ___No as the lines are a bit curvy.___________________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: _____yes_________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________You may copy and paste these questions on your post. And then answer these questions accordingly.

Previous activity

/

Next activity

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: _yes_____________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: _yes_____________________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: _______________yes_______
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ______yes________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

# data[].attributes.body
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: _Yes__________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: __No____________________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: ___No___________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: _He should measure more accurately.___________________________________________________________________________________________________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: _______No_______________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ____He should measure properly.__________________________________________________________________________________________________________________________________________________________________________________________________

# data[].attributes.body
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ______________________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: ______________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ______________________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: ______________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: ____yes__________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: _______________________no_______
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: __________________________yes____
If any of your answers to the above is 'no', explain which part can be improved.
Ans: __he can improve by drawing
straight lines _________________________________________________________________________________________________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

# data[].attributes.body
Okay, Thank you for your co-operation.

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: ___Yes___________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: _______Yes_______________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: _____Yes_________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ______yes________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________You may copy and paste these questions on your post. And then answer these questions accordingly.

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ______________________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: ______________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

# data[].attributes.body
Hi Sophia, the front of the base is slightly shorter than the back, as such the left side of the base is not parallel to the right side. The width of the base is less than 4 parts of its height. Similarly, the height of the backing is less than 4 parts of the height of the base.

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ______________________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: ______________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

You may copy and paste these questions on your post. And then answer these questions accordingly.

# data[].attributes.body
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: ___________yes___________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: _________no_____________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: ___yes___________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: _______yes_______________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

You may copy and paste these questions on your post. And then answer these questions accordingly.

# data[].attributes.body
Hi Rachel, the vertical edge of your isometric sketching are not vertical, as such, your sketching looks slanted. The proportion are good. However, the thickness of the backing is inaccurate. In general, your sketching is very neat!

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: _Yes_____________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ____________Yes__________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: _________yes_____________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ____________________yes__________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

You may copy and paste these questions on your post. And then answer these questions accordingly.

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: __Yes____________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: _Yes_____________________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: _Yes_____________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: _No_____________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: _You can make the lines more straighter so that it will look like 30o _____________________________________________________________________________________________________________________________________________________________________________________________________

# data[].attributes.body
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans:
For you observe, i cannot see the 2D shape, therefore i cannot critique on it
If your answer to the above is 'no', explain which part can be improved.
Ans:
Please actually add the 2D image

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans:
Yes indeed as for we can observe
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans:
As a critique i cannot tell weather it is drawn as 30 degrees my friend
If any of your answers to the above is 'no', explain which part can be improved.
Ans:
There is no part where it can be improved, as i cannot tell either way

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans:
As we can again observe, yes indeed
If your answer to the above is 'no', explain which part can be improved.
Ans:
We cant improve on it much more so, thank you for allowing me to critique this.

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ______________________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: ______________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

You may copy and paste these questions on your post. And then answer these questions accordingly.

# data[].attributes.body
2) After posting your sketch, on the same padlet wall / website, look for your assigned peer's sketching and give appropariate critiques using the following questions:

a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans:yes
______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: most of it______________________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: most of it______________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans:yes ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: _Yes_____________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: Yes______________________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: __Yes____________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: _Yes_____________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: _____NO_________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: __The left side is too tall and the right side a bit shorter____________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ____________yes__________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: _________yes_____________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: __________yes____________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: _No________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: _The backing is slightly out of shape as the top of the shape is too narrow.___________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: _ No ___________________________
Are the horizontal edges of the display unit drawn as 30 °  lines?
Ans: _ No ___________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: _The vertical edge of the backing is not vertical, which makes the backing appears that it is falling backwards. Besides, the left horizontal edges are more that 30 o and the right horizontal edges are less than 30 o ._________________

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: _No__________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: _The width of the base is too long with respect to its length and height. The thickness of the material is all way too thick. There is also no thickness for the backing.__________________________

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ______________________________
Are the horizontal edges of the display unit drawn as 30 °  lines?
Ans: ______________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________