# data[].attributes.body
I scored 4-5 in most of my design specifications .

some examples are:
1. when i made the outline shape of the logo with the stitch texture
2. when i had drawn the car. It looked quite realistic even though it was drawn with curved lines.

I did not score a 1,2 or 3 in my work

The reason i got a 4-5 is because:
1. i completed my work as my client asked.

2.  i tried my best to make the logo reach the expectations of my client.

H

# data[].attributes.body
The ways I can improve on my logo is by adding more content that will go with the logo, content that will let my clients potential customer to have more knowledge by just viewing the logo

# data[].attributes.body
So i scored a 5 in my design specifications and i think a way i can improve is by writing much more faster so i can finish my work on time and complete it within the time limit. and i want to study much more so i can understand the subject or the specific topic

# data[].attributes.body
so i scored 5 TO 4 in 5 of my specifications which were

My logo is suitable for the company                                               Logo will have square/circular design

Company name will be displayed (karibu homes)

My logo should be easily recognizable and somewhat simple

My logo will have brown green and yellow in it

| Logo will depict a house made out of the letters K and H
I scored 1-2 in

| Logo will depict a house made out of the letters K and H

# data[].attributes.body
1) In my 2nd Logo 'Varun Fabrication' I started with design specification. My average was 4-5.
2)So, at first my client gave me three when in the table it was written that my company's name is clear
3)I never got a 1-2 because my logo was not that bad.
4) My some activities mentioned in the table caused me 4-5 because some activities were absolutely right. I only got a 3 at some of the rare activities, where what activities i wrote were not really visible .

My total score was 29/3

# data[].attributes.body
1. In my specification i got all of them 4-5. My specification are :
Combination mark
wants two circles
C lours are grey, green, blue and black
2 word marks
word marks are bone doctor and bone injuries
knee icon
all texts are in black.

2. None of them are 3

3. None of mine  are 1-2

4. I got most of them 4-5 because i followed my Client

# data[].attributes.body
1) i scored 4-5 in the peer logos of
i) the logo will have the colors green, brown, and black
ii)my logo will be an emblem
iii) logo will be a circle
iv) my clients logo will have a black background
v) nft will be written in a conjoined way
vi) the text will be written under the main part of the logo in brown
vii) the NFT Consult will be written i capital
viii) the conjoined NFT will have a shadow.

and for my client i got a 5 in all but the first one where i got a 4 and the forth where i scored a 3.

2) i scored a 3 from my client where the specification said my clients logo will have a black background

3) i didn't score a 1 or 2

4) i scored a 4-5 because i followed what was in the specifications fully.
i scored a 3 because the colours didn't come out clearly.

# data[].attributes.body
Hi! I'm Rayn, I am planning to join the academy in Year 7 as a resident

I am 11 years old and I was born on December 8 2005

I live in Kinshasa, D.R.C and I go to a school called T.A.S.O.K  (The American School of Kinshasa)

I am looking forward to joining this class and the school.

# data[].attributes.body
1)  Most of the specifications were marked as 5 but one of them was a 4.
1} The logo will have a yellow star - 5
2} The name of the company will be on the logo - 5
3} The shape will be unique - 4
4} The logo will relate to security - 5
5} It will be colorful - 5

2) i got 4 and 5 on most of the specifications because i mostly aimed to finish them. I tried making the specifications related to what i did on my logo.

# data[].attributes.body
some design specification that I got a 5 and 4 are:
The logos name will be "Mombasa Aquatic Club"
The logo will be black and red
The background is going to be white
The logo will have someone swimming
logo will have tagline
THERE IS ONLY ONE SPECIFICATION THAT I SCORED A THREE:
my clients logo will be a combination logo.
The reasons as to why I scored a 3, 4 and 5 was because I was accurate I listened to everything my client wanted because if I don't listen to what he wants I will end up getting a 3 like I did my client wanted me to put the logos name above the logo but I kept the tittle under instead but i had a reason to it but he still went on and gave me a 3 which is fine but you should listen to them and follow because you will end up getting  5

# data[].attributes.body
1. I mostly scored

# data[].attributes.body
So far i have scored 5/7 full mark(5)
The others are graded as 4s
The only room for improvement is to make the logo more clear of its content

My logo goes by the name of Triple S solar.

# data[].attributes.body
In my specification I scored a 5
after my client and peer went through it
My logo will have green ,yellow  and red
It will have  three circles ;the first one colored green the smaller one colored yellow and the last one colored red .
I did not get a 3 any where  neither a 1 nor  a 2
I scored a 4-5 because my client was pleased of what I had done  everything that  my client wanted I indicated it  nicely and where it was suppose to be
In my other specification I decided to draw two leaves which I colored i them green

my logo

# data[].attributes.body
1) I scored 4-5 in a few of my design specifications where I worked poorly and scored higher in others.
2) I never scored a 3 in any design specifications and I hope not to get it.
3)I not gotten a 1-2 in any design specification.
4) I believe I have scored between because maybe I was not paying attention therefore I might have misunderstood something and did it wrong. I hope to score higher next time during my specifications.

# data[].attributes.body
The design specification that i scored 4-5 was in
1.My logo will have blue,pink and purple colors.
2.My logo will have a headphone at the top.
3.My logo will have a slogan which is (we play you listen).
4.My logo won't have a shape anymore because my client said that it looks so awkward with the shape.
5.My logo will have musical notes as a border because they will decorate my logo.
6.My logo will have a play in the middle of the headphones so that people will know that it is all about music.
7.My logo will have my client's telephone number in the bottom so as to the people would call him.
8.My logo will have my client's address so that people would get him if they want to see him.

# data[].attributes.body
my logo is called
AnimalFeed
the design specification that i scored a 4-5 was in 1.the logo will have diffrent colors like purple,red,black,yellow, white and brown
2.logo will have a dog and a bowl of treats as the badge
3.the logo will have a company name written in black
4.the background wouldbe in white
5.they will be 3 diffrent circles in diffrent colors
i did not score a  3
i did not score a 1-2
i might have scored a 4-5 because all the colors where there in the logo,
the dog and the bowl of treats is there as a bagde and it clearly shows,the company name was written in black,
the color white was more as a cream than a white thats why i got a 4, all 3 diffrent circles where there

# data[].attributes.body
I got a 4 and five in almost every thing because every thing was visible to the client to the parent and to the student like for example I said my logo will be an oval and when the client student and parent saw my logo they said yes the circle is visible
I don't score a three or a two or 1 because I was following my  design specifications

# data[].attributes.body
1.  Some designs where I scored 4-5 where when creating the vertical title for my logo saying 'FUNZI QUARRY', adding the slogan 'block comfort' in the building and when drawing the curved tick. Also when drawing the building on top of my tick, when adding and creating the star shape on top of the building and when colouring all my text blue or black.Lastly, when colouring all the features in my logo.

2.  I managed to sustain 5s and 4s throughout all my specification tables. This has made me able to not get any 3s.

3. As said before, my top quality work helped me to achieve only the best marks thus not making me get any marks from 1-2.

4. There are many things that might have caused me to score 4-5. These include being very precise with my drawings and concentrating a lot when making them. I also picking the best colours to colour my logo and colour the features very carefully . I also followed my specifications very well and throughout enjoyed creating my logo. Thank you.

# data[].attributes.body
My Specifications

- Logo will include blue, black, orange and white = 5

- Logo will include rectangular shape                     = 0

- Logo will include white shield shape                     = 5

-Logo will have a black background
= 5
- Clients company name will be at the bottom of the logo in orange
= 5

I think that the reason I got the grades i got is because of the

# data[].attributes.body
1.I scored a 5 in design specification one, two, five,seven and eight.I scored a 4 in design specification four and six.
2.I scored a 3 in design specification three.
3.I didn't score 1-2 in any of my design specification.
4.what might have caused me to score a:
-4-5
because the design specifications i got 4-5 were well  used in the logo.
2-3
the specifications that i got 2-3 were poorly used in the logo.

# data[].attributes.body
1. in all of my design specifications i had scored 4-5 which to me is very good
2. in none of my design specifications i scored a 3 because i try hard to go for high marks so i avoided 3-2-1and i decided to go for a 4-5 because those are reasonable marks to get
3. in none of my design specifications i scored 1-2 because i think i worked hard to get higher marks
4. the reason why i got a 4-5 was because i put all my hard work into it and i did not panic when doing it so that made it good work

# data[].attributes.body
WHERE I SCORED 4-5
My client, peers and parent have given me a 4-5 in all specifications i had. This is according to everyone who marked my logo.
WHERE I SCORED 3-2-1
I have not scored these numbers in any of these  in my specification.

WHAT MIGHT HAVE GIVEN ME A 4-5
What might have helped me score a  4-5 in all specification is how i followed all my specifications. My client , peer and parent were quite happy with my logo. However i could have tried to make a logo with a better image as my client, peer and parent were concerned as the image was not that good. Also they were concerned about the font it was not creative as promised. Overall i did Good.

# data[].attributes.body
MY LOGO IS CALLED MALI YA MOMBASA
1. I scored 4-5:
- I scored a 4-5 in my border colours green and pink.
- Title colour black.
-Border shapes oval and circle.
-Title font(handwriting)
2. I scored 3
- I scored a 3 in background colour.
-My outline shape which is a star.
3. I scored 1-2
-I scored a 1-2 in background colour again
4. What caused me to get that score:
-I think i got a 4-5 because of my ideas such as i got a 5 in my title colour black which was showing from far even.
-I think i got a 3 because of my outline shape which was a star and could be better if it could be a normal shape such as circle, square, etc.
-I think i got a 1-2 because of my background colour which is dahl and type of orange  and type of yellow. could be better if it could be a normal colour. example=red.

# data[].attributes.body
1. I scored a five  in desighn specification one, three , four and seven.  I sccored a four in two,five and eight
2.  I scored  a three in desighn specification six
3.none.
4.I scored those [4-5] because i focused much  on making them good that is why i got 4-5.
iscored three because i did not know how to draw a wings.

# data[].attributes.body
1. My client, parent and peer gave a 5 in all my specifications, except the last one - 2D with shadow my client and peer gave me a 4.

2. I have not scored a 3 in any of my specifications. I have tried to maintain the 5's and 4's in all the specifications, that's what had prevented me from getting 3's

3. I have not scored a 1-2 in any of my specification. As I said above, I have tried to maintain 5's and 4's and I have only done things mentioned on my specification.

4. The thing that caused me to get a 4 instead of 5 is that the shadow in my logo was not too visible.

# data[].attributes.body
Data Analysis (Logo Designing)
1.  On most of my specifications i got a 4 - 5. Some of the Specifications that i got a five or a four are the wording, colours, and the type of logo (combination mark).

2.  Where did i score 3 ?
I only scored a 3 in "one" of my specifications and that specification is the part where the square ontop of the circle.

3. i scored 1-2 in "none" of my specifications  of my logo design4

4. I think i scored 3 in one of my specifications because she thought that the shapes were not supposed to be seen on the sides.
I also think that she gave me a four because the combination mark didn't look so good

# data[].attributes.body
1. Most of my design specification s I got  5's.  The reason of why I got  most of 5's is because mostly I followed the specification table except one specification that I had to change one of the specification, so my client and my peer gave me a 4 but my parent gave me a 5. Another specification which I mostly  got a 4 is when I wrote that my logo will be simple but my client and peer thought that my logo was a bit complex but my parent thought it was simple.

# data[].attributes.body
1. The design specifications I got a 4-5 in were: There will be a crescent next to the cross, the cross will be red, the crescent will be green, agakhan hospital will be red, there will be a cross and agakhan hospital will be written under the cross and crescent.

2. The design specifications I got a 3 in were: there will be a cross and agakhan hospital will be written under the cross.

3. I did not score a 1-2 in any of my design specifications.

4.What might have caused you to score (a) 4-5. I followed all of my design specifications and they look nice. (b) 3. I followed my design specifications but it didn't look nice. (c) 1-2. I did not get a 1 or a 2

# data[].attributes.headline
Taha Gulamhusein - Data Analysis (Logo Design)

# data[].attributes.subject
Taha Gulamhusein - Data Analysis (Logo Design)

# data[].attributes.body
1. Where did I score 4-5
According to my results, I have scored all of my design specification In this category including having a main circle, thick outline, the circle being split into 3 parts, sophisticated colours, 5 diagonal lines, a small bulge at the top and being designed as a combination mark
2. Where did I score 3
No I have not scored any of my specification here.
3. Where did I score 1-2
I did not score anything in this category

4. What might have made me score a

4-5 -
I have scored most of my specification in this category because the people that rated me probably were pleased with my logo and thought my logo was quite successful when matched with my design specification. I have tried sticking with my specifications and have attempted to execute the task as good as I can. I have also clearly incorporated all my specification in the logo and I don't think that there was much doubt on how I used them in my logo However, There were some issues concerning my colour stating that it wasn't used much or appropriately, didn't stand-out much and had a limited use of the colour gold. Also the three split parts of the circle weren't so clear as two of them were the same colour which might have prevented me getting all five

3 -
I did not score any of my specification in this category as I think my logo was very successful and that all my specifications were properly integrated into my logo, making most of my ratings go into the categories above. I also think it was very clear, making most of my ratings go above this rating

1-2 -
My logo did not fit into this category in my opinion as I think that my logo had incorporated the specification well

# data[].attributes.body
1)I scored a 4-5 in in most of my design specifications.
Like in specification that my logo will be made by graphic spring,logo will have car in green,logo will have a circle in black,logo will have a name J&J,and logo will have a tittle written S.F.L.
2)I scored a 3 in 1 of my specifications like logo have opening and closing timings .
3)NONE i never had any 1 and 2 for my specifications.
4)I think what caused my to have a 5 is that i said what was actually going to happen.
I thing that i got a 4 because as the comments clearly said that i was not detailed.
I think that i got a  3 in my work because some of the things that were important were not clear enough.
MY LOGO

# data[].attributes.body
1. What are some of the design specifications that you scored 4-5?

2. Which design specifications ( activities) did you score a 3?

3. Which design specifications ( activities) did you score 1-2?

4. What might have caused you to score;
-  4-5,
- 3,
- and 1-2?