# data[].attributes.body
(1) Your first step is to heat up the vacuum heater.
(2) The second step is to put your mold into the vacuum heater and put you plastic (hips) on top.
(3) The third step is to turn on the heat and wait.
(4) The fourth step is when you feel the plastic is melted or hot enough pull the lever down and suck the air out of it.
(5) Let the plastic go around your mold and then let it cool.

# data[].attributes.body
Place the high impact polystyrene (HIP) on top the vacuum former. Put you desired mold in the area under the plastic. Clamp the plastic and leave it for a couple of minutes when HIP is like paper pull the lever down and put vacuum on.

# data[].attributes.body
Have you object you want to vacuum form ready and wait a minute or two fo it the machine to heat up. when the machine is ready to be used, put the object into the vacuum former and put H.I.P.S (high impact polysterene) onto the top of the machine and clamp it down.The last step is to take it out.Be aware the materials being hot.

# data[].attributes.body
1.Turn on the vaccum forming machine.
2. Make a mould to put inside.
3. Place a sheet of thermoplastic over the mould.
4. Clam the thermoplastic.
5. The air is then sucked up and the sheet goes on top of the mould.
6. Let is mould take it out of the machine then let it cool.

# data[].attributes.body
Turn on the vacuum so it gets hot.
Then place the thing that you want inside and put the plastic on top of the model.
After you have to turn on the heat and wait.
When you think it is ready stop it and suck the air.
Then let it cool down

# data[].attributes.body
before you start you turn on and warm up the vacuum former,after a while you place the object you want to form out of the high impact polystyrene in the vacuum former,place the high impact polystyrene in the clamp on top then clamp it.Wait a while before vacuum,after it is ready remove the clamps and wait for the high impact polystyrene to cool.

# data[].attributes.body
1) Firstly you warm up the vacuum heater.
2) Place your mold inside the heater and place plastic on top.
3) Turn on the heat and wait.
4) Once you think it is ready pull down the lever and suck the air out of it.
5) Then let it take shape and then let it cool.

# data[].attributes.body
Tomas O'Callaghan
Turn on the vacuum former and let it heat for a while. Then after about 2 mins place the object you want to form on the stage inside. Then clamp your piece of H.I.P.S. soon it will be very soft and then you press the vacuum button and it will suck the item up.

# data[].attributes.body
1. Warm up the Vacuum former heater beforehand.
2. Place the desired shape/mould into to the vacuum former.
3.Clamp a piece of high impact polystyrene onto the top of the former.
4. When the polystyrene is heated enough, turn on the vacuum.
5. Pull a lever at the side to lift up the object into the heated polystyrene shaping the piece of plastic.
6. Remove the plastic mould and wait for it to cool down.
7. You are complete. Well done.

# data[].attributes.body
place the high impact polystyrene into the vacuum former. Put the mold on the table underneath it. It takes a while to heat up the plastic. Pull down the lever and then turn thye vacuum on.

# data[].attributes.body
You insert the item you want to form like a mold  for a car. Then you clamp it in place so air doesn't escape. If air escapes then the former won't work. You then pull the lever that is at the side of the machine and let it form.

# data[].attributes.body
place your object in the thing you want vacuum formed in the vacuum former put the clamp on the (hips) high impact polystyrene and switch on the heater when its ready pull the lever on the side and turn on the vacuum so it wont get stuck

# data[].attributes.body
It forms the hot high impact polystyrene and changes it to what ever shape you what it to be

# data[].attributes.body
place the thing you want to be vacuum formed in the vacuum former. clamp the high impact polystyrene and turn on the heater. when the HIPS starts to sag lift up the object and turn on the vacuum. wait for it to cool