# data[].attributes.body
Steps of making Rajasthani puppet:
The process of making puppet is very intricate.the puppets made are of small size; with wooden heads, decorated with cloths and stuffed with chaan or cotton.

The making process can be categories into following steps:

Making of the face

Finishing

Coloring

Stitching

Decoration

# data[].attributes.body
Suhana Chowdhry finger puppets

# data[].attributes.body
I make two finger puppets of animals:-
1:- First I took two sheets of square size and folded them into cylindrical shape.
2:- Then I cut two circles from the same sheet and make the face of two animals on it and paste that circle on that cylindrical shape sheet which I make previously.
3:- At last I decorate the lower part ( the lower cylindrical part)that was the body of the animal and the my puppet us ready to see.

# data[].attributes.body
Sejal tyagi

# data[].attributes.body
1 take a carboard and draw a circle on it for face and then cut it , and also draw a oval shape  for the body and then also cut it .
2  take a glace paper   of any colour  for the dress i have taken grey and then paste it on the oval cutted bodg .
3  decorate the dress inany way you want .

4  take the  glace paper of   skin colour or you can take white and then paste in on the circle , and draw  eyes ,nose etc .
4 then put the face and body on the stewer  and paste it with a cellotape from backside.
5take any waste cloth and tie it on the neck (for hands)
6 then  draw a  hand on paper and then cut it and paste it 7 for hairs take wool and  roll them on your hand and the n paste it on the hand
Your puppet is ready

# data[].attributes.body
#finger puppets
Steps of construction
I have taken 3 origami sheets. Folded the origami sheets . I have made faces of a girl boy and their grandmother .and take out the cutouts of their faces and then coloured them and pasted the faces on those rolls .
After that I have made dresses of the personalities.
That's it.

# data[].attributes.body
I  made 2 finger puppets of cartoons
1) I took two sheets of square size and folded them into cylindrical shape
2) Then I cut two circles of the same sheet and draw their faces on it
3) Then I pasted the circles i.e the faces of the puppets with the cylindrical base
4) At then I made a design on the lower part To give A look to their dresses.

# data[].attributes.body
By Natasha Arora

# data[].attributes.body
By Natasha Arora
Steps of making:-
1) fold a piece of construction paper into 3rds lenghtwise.
2) glue the top flap down to hold the folds in places
3) rotate the rectangle so it's vertical
4) fold the rectangle in half, bringing the 2 short edges together
5) fold each flap down so the edges line up with the centre fold
6) glue the 2 outdides folds down
7) then decorate the puppet however you'd like.
8) place your fingers in the 2 openings to use your paper puppet.

# data[].attributes.body
By  Shilpi  Ghai
1. Take A size sheet Prepare and  gather  all  the  materials needed to  make  bunny.
2.draw a picture of  a rabbit body  and  make  it  large  enough to  fit  your  hand.
3.put the  pattern on  a  peice  of  blue  craft and  cut  it  out. Repeat  this  to  make  a  second  blue  craft felt  pattern shape  bunny.
4.cut a pattern of  bunny ears from  the  yellow paper.
5.Trim  the  red  felt  leaving a  small  red border  on each of  the  bunny ears.
6.sew the  sides  and  top  of  the  pupppet  but  not  at  the  bottom.
7.cut out  a  pair  of  eyes and  a  mouth. from  black  and  red  sheet.
8.follow the  above instructions and  after this  it  is  complete.

# data[].attributes.body
Aayushi Beriya
....I prepared a hand puppet of famous catoon Doraemon. I took a big sheet and draw the cartoon, then after folding the sheet I cutted out the cartoon....and then painted its both front and back side..... then pasted accordingly.

# data[].attributes.body
By chhavi sansanwal

# data[].attributes.body
Ram - Sita puppet

Steps :

1. Cut out 2 circles for the face
2.  Make faces expressions and add accessories ( flowers , hairstyle , etc)
3. Now , cut out a red rectangular piece of about 1.5 inch for RAM upper body dress and a red dhoti to cover the lower body
Take a thick brown thread to make dhanusha of lord RAMA .
For SITA , make two cut outs ( one for Upper body and the other for lower body)
As shown in the picture , to make the dress look more attractive , make some designs ( with the help of glitters ) on the lehenga .
NOTE : make hairstyle , flowery Mala , facial expressions with utmost care

# data[].attributes.body
ANSHIKA BANSAL
Steps for puppet
1 firstly you have to take an A4 size sheet .keep it horizontally and fold more than half of the sheet from one side.
2 then fold and paste the other side of the sheet .
3. Then fold the sheet in two equal halves. Then again fold the one side of one half part then again do with other part .
4 now cut out ears ,tongue ,eyes of the puppet on another sheet and paste them correctly.
You are done with your cute HAND puppets.

# data[].attributes.body
I made this puppet with a socks and pasted buttons as its eyes and used wool as its hair

# data[].attributes.body
By- Sukriti khatri

# data[].attributes.body
Step for lion puppet
1. Use A-4 size sheet . Fold it from both the sides equally
2. Now fold it up and down . Opposite side
3. Fold it from the edges
4. Now you got the open Face on the lion .
5. Use red colour sheet for toung.
6. Use black colour sheet for nose
7. Paste goggle eyes as well.
8. Use different size and colour sheet strip's for hair
Now your lion is ready to roar
Step for rat puppet
1. Use black colour sheet .
2. Use a compus a make a half circle than two small circle for ears
3.cut it . Paste the circle from the edges and make it as a cone size
4. Now using a thick sheet make a strip . Which we put it on our finger
5. Small strip of tail .
6. Colour it as well put goggle eyes 👀

# data[].attributes.body
1.Take a white sheet and fold it equally into four parts.
2.Fold it in half.
3. Cut out ears and the tongue and paste them.
4. Draw the face.
5. There you have your dog puppet ready

# data[].attributes.body
1. Fold an A4 size sheet 3 times horizontally.
Secure with some glue.
Now fold paper in half and fold over flab.
2. Flip and fold over the other.
3. Cut out the shapes of eyes, tongue and teeth.
4. Glue eyes on shark and frog.
5. Glue tongue between flaps of frog and roll it inwards with a pencil.
6. Glue teeth between 2 flaps of shark.

# data[].attributes.body
Palak Sharma made it by folding paper and pasting on the stick then prepare face using sketch and decorated using stones

# data[].attributes.body
Step 1: Collect Materials-  Cotton , fabric, colourful sheets, rope and stick.

Step 2: Create a template and cut out your foam /or make a      cotton ball.

Step 3: Stitch the skin ( wrap the body with the help of the fabric ).

Step 4: Now attach  the head with rope and start assembling the whole body.

Step 5: Cut out a tail, feet and beak and stick it.

Step 6: Finish it by making it's small eyes and drawing the stripes on its body.

Step 7:  Insert hooks on its head and body so that it  can  be made to move.

# data[].attributes.body
Nikita:
Step 1- take some coloured sheets. Fold it vertically and paste it from the edges.
Step 2- flod the sheet twice in different directions.
Step 3- make eyes 👀, tongue, ear, wings, nose👃 on a white sheet and cut it out.
Step 4- paste eyes, tongue, ear, wings, nose on the floded sheet.

# data[].attributes.body
PRIYA YADAV

Steps of contruction
Take 2l bottel cut the upper part thrn take a cloth stitch the cloth with bottel with the help of sew and thread then take a string and make hands of the pupet from the help of wollen make hairs of the doll and make eye of the puppet.

# data[].attributes.headline
Aditi Ghosh1. cut out a circle from a white sheet and draw the eyes, nose and lips of the fairy.

# data[].attributes.subject
Aditi Ghosh1. cut out a circle from a white sheet and draw the eyes, nose and lips of the fairy.

# data[].attributes.body
2. Take a thin strip of red paper and make the hair of the fairy.
3. Take a straw and attach it to the face of the fairy.
4. Take a red sheet and start folding with a distance of 1 cm apart. That will be the dress of the fairy.
5. Repeat it for the wings of the fairy with a white sheet.
6. There you have your puppet fairy.

# data[].attributes.body
Steps for making a puppet are follows:-
1. Make the shape of the animal you want to make
2.now trace the animal on the glitter sheet and cut the shape
3.cut two pieces together and then paste them
4.when you will paste it you will be able to insert your hand in it
5.now you can decorate your puppet in your style like eyes,nose or body etc.

# data[].attributes.body
I took 1 sock. Then rotated it at the back side and added a cutout of cardboard (oval shape). Then added sponge for comfort in holding and then rotated it to the other side which resulted in opening of mouth. Then i cut a red chart for tongue. Then i used googli eyes and covered it by cutting another sock for black effect. Then i used colored cotton for nose and different colored threads foe its base. At last i added feathers for a crown. I also used shining sheet for ribbon

# data[].attributes.body
1)first to give the the body shape i rolled the newspaper and then fold that newspaper  roll itno two parts and just to make it more puffy and applied tape on it
2) then for hands i took a small newspaper and roll it again and covered it with white tape & then paste this behind the body and then i drew and cut out the shape of skirt and top and then paste it on the body
3)then i covered hands with thread and after this i made face of the puppet on the paper and paste it .
4) then i cover it with a cloth
5) IN LAST i decorated it with different stones and sparkle sheets and also attach threads to move my puppet .

# data[].attributes.body
MAKING 2 HAND PUPPETS
1.first i took two A4 sized sheets of green and white colour respectively and folded them to get an even 2d cylinderidrical shape.

2. then i folded half of the sheet and superimposed it onto the other (to get 2 overlaps)

3. after that, i separately decorated them according to the theme i was going for i.e a crocodile and a unicorn.

4. i finished it off by cutting a tongue shape for both of them and pasting them up on each of the two hand puppets and drawing eyes on the unicorn and some patterns on the crocodile.

# data[].attributes.body
1. Take a square sheet.
2. Fold it diagonally following both the diagonals.
3. Take one end and fold it till centre so that the end points is touching the centre. Do it with all the 4 sides.
4. Turn the folded sheet. Fold the 4 corners again in a way that the ends touch the centre.
5. Open up the end part like a cootie catcher.
6. Cut the upper ends of the  cootie catcher.
7. Make eyes, beaks, wings and legs.
8. Your bird cootie catcher is ready.

# data[].attributes.body
1) I rolled a cotton ball in a tissue paper and tied it with a thread.
2) then I folded the tissue into strips and rapped it with the thread.
3) the I wrapped a plastic bag around for the blouse.
4) I cut out a circle piece of cloth and made the skirt and dupatta out of it.
5) in the end made the face

# data[].attributes.body
In hand view puppet

# data[].attributes.body
devashree tiwari
steps:
cut the front part of a sock and stick a cardboard to it , colour the cardboard or stick a coloured paper on it , make eyes using paper and ears using carboard
draw a smile on the front part of the cardboard .

# data[].attributes.body
1.Take one A4 size pink colour sheet fold it in four parts and fold it along the middle crease.
2.Fold the rectangular shaped sheet again in four parts.
3.Cut three small white coloured circles colour one of circle pink and paste as mouth and nose.
4.Paste eyes, tongue and teeth
5.Make ears using another pink and white sheet and paste them.

# data[].attributes.body
1) i used different colored craft sheets for my puppet.
2)i made 2 rabbits using white and pink craft paper by taking help of google image

# data[].attributes.body
kashish Arya
First of all i took a newspaper and rool it this make the legs of puppet then i wrap foil paper to give shape of the body then i stich its cloth and put some stones to make it look attractive.

# data[].attributes.body
MUSKAN MAHESHWARI
1. Take socks and cut the upper part .
2. Now fold it to half and cut it from the bottom.
3. Stitch it separately.
4.Now using thread fold the upper part a little bit.
5. Fill the cotton inside it.
6. After filling the cotton Stitch and close it.
7. Now give the shape of the face.
8. Take another socks and make the cap for the puppet.
9. Now paste the eyes and nose.

# data[].attributes.body
This puppet is made up of wool
1. Take 3 colour wool blue white and black
2. Cut a piece of cardboard of 15cm and 7.5cm
3. In 15cm of cardboard give 50 rounds of wool for making body (white) and in 7.5 we had to give 35 rounds for making hands (blue)
4. Then tie it for one end and make a paper ball nd place it in wool to make head.

# data[].attributes.body
Sakshi
first take a sheet and fold from both the sides and paste it  then  give a shape  and take white  black yellow orange  sheet for making nose eyes and ear and red sheet for make tongue and for teeth

# data[].attributes.body
Step1: take A4 size sheet and fold it in half then fold it again.
Step2: cut eyes, ears, nose, tongue, and paste it on the puppet.
Step3: with the use of black marker give the details of puppets.

# data[].attributes.body
Socks puppet:
Take two socks
Cut off the toe end of the sock
Take a board n measure it to the size of the area of the socks that is being cut.
Cut the board to the size.
Insert it in the socks.
Then take a red or pink coloured sheet for the tongue and cut it to the size of the board n paste it.
Then make eyes, ears and nose.

# data[].attributes.body
firstly i draw this pictures on white sheet then after this i cuted it in shapes after this i did. Outline, make eyes and mouth and then color it and then paste stick in backside of picture.

# data[].attributes.body
1.I have taken colourful sheets and then made 5 faces of different animals.
2.after that I have pasted that faces on the sheets rolled in a cubicle shape.

# data[].attributes.body
PUPPET MAKING

PROCEDURE:
1:- make a simple drawing on pastel sheet or on form sheet directly
2:- color the figure (if required)
3:- cut the figure out
4:- make a stick by newspaper rolling
5:- cover the stick with colored sheet
6:- paste the stick on the backside of the figure

MATERIAL REQUIRED:
1. pastel sheet (or form sheet)
2. pair of scissor
3. fevicol
4. newspaper
5. crayons
6. marker (black)

following picture will be the outcome: (2 rabbits and and one elephant)[depend what character (of the story) you want to make]

# data[].attributes.body
Step 1- take a sheet and draw the characters that you wish to make.
Step 2-colour and paste them on a hard sheet.
Step 3- cut the sheet according the the shape of your puppets.
Step 4- Take thin sticks and cover them with colourful tape.
Step5- attach the puppets to the stick and they're readyy!!

# data[].attributes.body
Priya Rana
1. First, i take a clothes, cotton and sweing needle for creating a body and face of the puppet.
2. Then, I started cutting and took a small piece of cotton and stitched with the sweing needle.
3. After stitching, I joined the puppet face and the lower body with the sewing needle.
4. Then, I makes her clothes by using old clothes and stitched it.
5. After stitching her clothes, I make her face with the help of wool,wiggle eyes and pasted it with hot glue gum. I also make a choker for puppet using old stones and attached it with the ribbon on her neck.

# data[].attributes.body
1. At first I have taken a white sheet and fold it to give the shape of stick or stand.
2. After this I used another white sheet(small) and make a cone shape using it.
3. After that I used the clothes. I took the stick or stand which I made in first step and then pasted a piece of cloth to make the shirt of the puppet along with hands using paper and cover them by cloth to give a look of sleeves.
4. Then I take that cone shape sheet and put the stand or stick sheet inside it and pasted the remaining cloth around the cone from inside.
5. After this, I take another pieces of clothes to make dhoti(for man)and lehnga(for woman). Then I used needles and threads to stich lehnga. After that I pasted the dhoti or lehnga on the cone shape sheet.
6. After that I made the face using origami(orange) sheet from back side.Then I put dupatta or turban on the heads of the puppet.
In this way I made two puppets.

# data[].attributes.body
I took a doll and cut the head and the tail of the dolp and then bu sewing a velvet cloth around the neck with opening at the bottom so that it results in a hand puppet and space is there for putting hand after by using same cloth i made hands.further by taking another colored velvet cloth i cut it made the feets by sewing the cloth piece and then by stuffing cotton i stiched the pair of leg to the bottom and gave it a final touch by stiching the tail.

# data[].attributes.body
First I take black colour cloth and make a pattern for Penguin then I take a white colour cloth and stitched on one side of black cloth by putting his nose with brown colour and with black colour Eyes and stitch both of the black cloth together to make a hand puppet.
Second I take one cream colour cloth and stitch her hair and her dress with blue and red cloth then I make her eyes and bow with smile and stitch them all together .

# data[].attributes.body
Bhaktii
I first took a socks nd then filled some old clothes inside it nd then tie it.. Nd then took a cloth to make clothes for it nd then took wool to make little hairs for it.. Nd for hands I have took a cloth fold it round nd then tie it with a rope... 🌝

# data[].attributes.body
1) First I take a A4 size paper and folded it into in half
2)after that I pasted the end and then again folded it into half
3)after that I made eyes nose and ears with another paper and I also made teeth and tounge

# data[].attributes.body
Vanshika
Steps:
1) take an A4 size sheet. Keep it horizontally and fold more than half of the sheet from one side.
2) then fold and paste the other side of the sheet.
3) then fold the sheet in two equal halves. Then again fold the one side of one half part then again do this with other half also.
4) now cut the eyes, tounge and ears of the puppet and paste them correctly.

# data[].attributes.body
Firstly you have to take an A-4 size sheet than make a triangle with it unfold the sheet now you can see a line make two triangle with them .
Second step is you have to fold both triangle together and make it a single triangle .
Third step is you have to make one more triangle for the birds peak then take another color orgami sheet and trance the peak triangle then cute the traced triangle sheet on the peak area.
The fourth and the last step is cut an curve shape have circl for wing make an eye and then your bird is ready 😁.

# data[].attributes.body
1. first, i made faces of the animals on different color sheets
2. Then i took the same sheet and measured my finger size
3.then i rolled the paper and pasted it with the help of fevicol
4. I have drawn eyes , patch ,nose and ears with the help of sketch pen.

# data[].attributes.body
Step1:- I reffered a picture of a rabbit from google.
Step2:- I drew it on an A3 size white coloured sheet.
Step3:- Cut it, then coloured n outlined it.
Step4:- Then I joined all the body parts together and attached a paper knob at the back to affix it on my hand.

# data[].attributes.body
1) first i have taken a yellow colored A4 size sheet and cut it in the shape of minion.
2)i made the eyes and ears using craft sheet and made the dress of minion using oil pastels

# data[].attributes.body
Steps of construction-Take a small piece of paper, then make any animal face on it and then cut it.Then cut paper according to the size of your finger and fold it.Apply Fevicol at the end of the paper.Then apply face on the folded paper and make prints with black marker.