# data[].attributes.body
First I cut it out and made the eye hole . Then I  paper machaded it . I had to have no creases and cover it all.

# data[].attributes.body
First you cut out a cereal box then you draw the mask and the design in the box. Cut it out then make sure it fits. Cut a rectangle where you think the eyes will be. Then you can use the paste to stick paper on.

# data[].attributes.body
We made this by drawing 4 different designs of mask and then we had to select one of them to create, then we had to outline the mask on a cardboard box and then tape the mask to the box,  next we had to cut out the mask from the cardboard box, then finally we had to paper mache our masks by putting cellulose paste onto the paper mache and cover it on the mask.

# data[].attributes.body
First I cut out a drawing for my mask and stuck it to my mask. I then paper matched on all the mask which took a while and I cut our a space for eyes.

# data[].attributes.body
First we drew the design of our mask and then we annotated it. We then got a cereal box and draw the outline of our chosen mask. We then used gel and paper to crated a layer of paper mache on top of our  mask. We then can make 3d objects to go on your mask.

# data[].attributes.body
Steps:

1. Drawing designs
2. Choosing designs
3. Cutting cardboard for mask
4. Paper Mache the mask using cellulose paste

# data[].attributes.body
First I made a design plan and got a mask. Then I cut out cereal boxes to make details. Then I made paper mashe to sturdy it and now it looks like this we are going to paint it next lesson

# data[].attributes.body
To create the mask I had to put the cellulose paste onto the card board mask and then put paper mache over it so it can be painted on top of it. After you’ve paper matched all of it you need to put some more cellulose paste and rub it all over that way it’s all stuck on to the cardboard mask.

Step1. Draw 4 different designs and choose 1 to make.
2. Get some card board and trace your mask over it.
3. Cut out the mask and tape the mask to the cardboard box.
4. Use paper mache and smother it all over your design that way it will become easier to paint over and to put more designs.

# data[].attributes.body
First, I designed 4 different types of masks and picked the one I like best. Then I outlined the design onto a cereal box and cut it out. I then outlined a rectangle for the eyes and cut it out using plasticine underneath it. Next, I used little strips of paper and cellulose paste to paper mache the mask and then went over it in a final coat. I will experiment makingb3D flowers to put onto my mask headband and that is how I got to this stage.

# data[].attributes.body
1st we drew 4 different designs in our book and rendered them
2nd  I chose to do the flower one and got a mask
3rd I cut out the cardboard  base and made eye holes
4th I attached the base to the mask
Finally, I did papier-maché over the mask and base

# data[].attributes.body
First I have drawn my design on a cereal box then I have cut it out and them taped it to my mask, after that I put paper mache on the mask by putting cellulose on paper strips and sticking it to my mask design.

# data[].attributes.body
Steps:
1:design 4 masks in your sketch book
2:pick one to make
3:outline your mask out of cardboard boxes
4:stick it down to the ready made mask using masking tape
5:paper mache it using paste

# data[].attributes.body
First I made a design and then I got a mask. Second I cut out the details and extra bits out of cardboard (cereal boxes). Third I did paper mash on the mask and the cardboard boxes. This is what it looks like

# data[].attributes.body
So to make the mask, first I had to put the paste on the paper mache and then put it on the mask and rub it with more paste. After that, you keep on repeating that until it is covered. To make the paper stick to the actual mask, then we put paper around the whole of the edges, around the mask.

# data[].attributes.body
1. I designed my mask
2. I chose my design
3. I used a cereal box to design the back of my mask
4. I covered the mask with paper machê
5. I let it dry

# data[].attributes.headline
I made it by cutting the cardboard to the shape and cuttting out the eyes the I used paper mache to make it hold better

# data[].attributes.subject
I made it by cutting the cardboard to the shape and cuttting out the eyes the I used paper mache to make it hold better

# data[].attributes.body
Elliot’s work

# data[].attributes.body
If I had to describe my pencil case I would say that the colours contrast really well and that each colour has its own point for it to be recognised and none of the colours fade away.
I struggled a little bit as I kept on running out of thread and I kept on stitching the felt in the wrong places.

# data[].attributes.body
If I had to describe this pencil case I would describe it as colourful and bright as it has vibrant colours.  When I did the ears, I struggled as it was a very small piece and it kept on moving. The background of the pencil case really compliments and works with the llama.

# data[].attributes.body
If I had to describe my pencil case in words I think it stands out and the colours contrast very nicely, I very much like it.
WWW: I think I stitched it neatly and there are no bits sticking out, I think my colour choice is very nice and it looks nice
Challenges:the challenges I faced were stitching for example it took me a while to learn how to do back stitch 🪡. I also had to unpick my stitches a few times.
I dealt with challenges by unpicking my stitches and starting over and it worked out fine in the end.
I would make my design bigger next time for example the watermelon would be bigger 🍉

# data[].attributes.body
1. If I had to describe my pencil case in words I would say it’s cute, colourful, detailed and complete.
2. WWW was that it matches my original design and it looks like a cute cat.
3. The challenges I faced were the small details and things falling off. I also struggled with timing the knots at the end of the thread.
4. I dealt with my challenges by asking friends and cutting knots smaller until I got to the bottom.
5. Things I would change would be to make smaller stitches.

# data[].attributes.body
Www: The design is eye-catching
Ebi: More detail on the designs

# data[].attributes.body
W.W.W I did one running stitch
E.B.I I could to quicker and get more work done

# data[].attributes.body
WWW: I managed to sew on some of my felt and improve my design . It looks similar to the design brief in my book.

# data[].attributes.headline
Kaazim’s full, English breakfast pencil case

# data[].attributes.subject
Kaazim’s full, English breakfast pencil case

# data[].attributes.body
WWW. Is that I managed to sow my largest piece of felt (my fried egg), that way I have more time to sow my more trickier smaller pieces of felt (mushrooms and bread).
EBI. Is that I need more practise on sowing smaller pieces of felt.

# data[].attributes.body
WWW:I managed to finish sowing on my other piece of work but someone messed it up so I had to restart

EBI:Could have managed to finish the rest of my circles by the end of this lesson

Hussain 6FG

# data[].attributes.body
Elliot. Baby youda aka grohu pencil case design

# data[].attributes.body
WWW is that the felt was cut out to the size and shapes that I wanted then to. EBI is that the stitches were more even and equal in length

# data[].attributes.body
WWW: I WAS ABLE TO FIND THE RIGHT COLOUR THREAD AND I WAS ABLE TO STICH NEATLY WITH BERY LITTLE MISTAKES. I HAVE A GOOD COLOUR CONTRAST AND I WAS ABLE TO FIND ALL THE FELT THAT I NEEDED. MY DESIGNS WERE GOOD SIZES AND IT MADE THEM EASIER TO STITCH ON. I USES PIECES OF THREAD AS THE STARS. OVERALL I THINK THAT IT WENT WELL

# data[].attributes.body
This is a captain America shield with a sword going through it
I think I did well with progress
Harrison

# data[].attributes.body
Www= It resembles a cat and I like my design
CI= It’s extremely messy and uneven

# data[].attributes.body
Www:I managed to catch up with sewing on a little bit of the face.

# data[].attributes.body
I have improved by layering my stickers well for example I didn’t sew 🪡 through 3 layers of felt I sewed 🧵 2 layers together and then sewed them on so it was less felt to sew through(Ethan☄️🐉🫠)

# data[].attributes.body
My captain America shield with a sword going through it and at the end my stitching was good and I think I made lots progress
Harrison

# data[].attributes.body
WWW: I backstitched around two felts and tried stitching the mouth

# data[].attributes.body
WWW: The stitches were all the same size and I got the majority of the front cover done. It looks like the picture that I made in my book and I am very proud of it,

# data[].attributes.body
WWW:I think I was good with the speed and my sowing for the red stitching was effective.

EBI: I spaced the white stitching to far apart.

# data[].attributes.body
I know I have been successful in this lesson because I can look at my work and see that I have completed the success criteria for this lesson.

# data[].attributes.body
I did different layers but I didn’t finish it which I should have done so next time I will be quicker

# data[].attributes.body
What I did well was the cuteness of the cat I think it will be very eye catching

# data[].attributes.body
I know I have done my work well because I can see that I have made a lot of progress since last lesson and I can see that my work is the definition of what we were asked to do - Isabel

# data[].attributes.body
I know I have been successful because when I look at it I know that it is the best of my ability and I could not have put in more effort and hard work

# data[].attributes.body
I know I’ve been successful because I have made progress since I last worked on this project. I know also because I can see that I have completed the criteria of this lesson.

# data[].attributes.body
I know I am successful because I did the right size and I managed to pin the zip

# data[].attributes.body
I know I have been successful in this lesson because I have listened to the success criteria and fulfilled it
I have followed all the steps

# data[].attributes.body
I think I have been successful today because I can look at my work and know that I have done what was asked of me and I am happy with the outcome of todays lesson. I think the sizes are good but maybe I should make them a little bit bigger. I think the base colour contrasts with the zip and my design idea.  I have made a lot of progress as I did more than I thought I could and pinned the zip well. I finished most aspects of my design and I modified and adapted my design to make it more eye-catching and appealing for my target market.

# data[].attributes.body
I think I made progress becausë ī hāvē mādē ā śtārt tō making the design for my pencil case I am also happy with the result of today. Also I did annotations 😀.(Ethan 🐉☄️🫠

# data[].attributes.body
I know I was successful in this lesson because I have made progress on my pencil case and taken on feedback from my teacher and classmates. I have followed the criteria steps for this lesson .

# data[].attributes.body
the design and cutting went really well and the bowler hat 🎩 looks amazing

Eliot 🫠

# data[].attributes.body
Miii designn

I know that I have been successful when I have eye catching and bold templates on my pencil case.

# data[].attributes.body
I know I have been successful because I merged different annotations to my main design at different places I also made progress by trying different attempts but in the end it all worked out

# data[].attributes.attachment_caption
My pencil case is a full English breakfast!

# data[].attributes.body
I know that I am successful with my pencil case because I’ve  made progress, since I have created quite a lot of progress as I’ve re-sized my fried egg several times to make sure that it’s the right size by enlarging it, so that my pencil case is very eye-catching and will be successful.

# data[].attributes.body
I know that I have been successful as my work is like my design in my book and it matches the design criteria.

# data[].attributes.body
I know I have been successful because I feel happy with my design and it’s size is perfect for the pencil case. I feel I have completed to success criteria.

# data[].attributes.body
I know I have been successful because, I have pinned the zip to the felt, and I have made the size of every individual part of the design big and bold.

# data[].attributes.body
I know I have been successful when I have used big bold templates that fill the pennilcase

# data[].attributes.body
WWW: I used the colours very well with good gradient
EBI: I overdid it on the glitter.

# data[].attributes.body
W.W.W I think the paint was good and pretty easy to do so that was good.

E.B.I It was hard to do the frame and the glue and everything was tricky.

# data[].attributes.body
WWW- I managed to blend the colours
EBI- I could have changed the shape and size of the petals

# data[].attributes.body
Www the wire shape
Ebi.    the blend of couloir

# data[].attributes.body
WWW= I liked the way I blended the shades of blue
COGB= I didn’t get to finish and it’s very messy

# data[].attributes.body
Www: the colours have blended nicely. The shape of a heart worked well.
Ebi: it could’ve had leaves and a stem
(The other petals broke off so i had to redo them)

# data[].attributes.body
WWW is that when I bent my flower, it was really good and in a perfect shape with little indents, also the way I contrasted the colours and how I made turquoise really surprised me, and finally the sprinkles just add that little bit more which makes such a big difference.

EBI is that  I think I could have blended the colours better, that way it would look much more realistic and like a flower.

# data[].attributes.body
I found putting on the tissue paper easier than putting on the glitter. The contrasts of the colours went well but I could of worked harder into sculpturing the wire

# data[].attributes.body
WWW:I managed to blend pink and purple
EBI: I could of used a bit of glitter

# data[].attributes.body
WWW: I used varied colours of glitter to sprinkle subtly on shades of colours like yellow to gold to red.

EBI: Don’t mix colours too much; make more pure.

# data[].attributes.body
I found applying the tissue paper hard

# data[].attributes.body
WWW:I managed to use three colours without overlapping
EBI:I could of blended it more

# data[].attributes.body
WWW: I think the painting on mine is really nice and I really like the fade. I also like the glitter
IBI: it would be better if I faded the colours a bit better and I think I could have sculpted the wire better 😃
Ethan.

# data[].attributes.body
WWW: I used a gradient use of colours that blended well with each other .

EBI: I used more of a variety of contrasting colours on to my flower .

Tia

# data[].attributes.body
WWW: The colours blended really well and the glitter applied to all of the spaces that I wanted it to. When I put the tissue paper on, it didn’t break or crack when it dried and it just set like how I wanted it to.

IBI: I could have made a leaf from the extra wire at the bottom to make it look like a proper flower. I could have shaped the petals of the flower a bit more curved to make it look a bit better but overall, I am proud of what I have made!

# data[].attributes.body
WWW. The splash of colourful glitter was very vibrant
EBI. I think I overdosed on gold glitter.

# data[].attributes.body
WWW.glitter is a bit random
EBb.the paint on the smaller one

Elliot🫠☄️

# data[].attributes.body
Www is that I painted the flower well but even better if is that I should have used more of a gradient

# data[].attributes.body
WWW
My inntenas were creative
Ebi
I could have done two sets of wings.

# data[].attributes.body
Www: I was able to create a mythical beast
Ebi: I added more detail

# data[].attributes.body
WWW- The size and detail
EBI- I had even more colours and patterns

# data[].attributes.body
Caddisafly

# data[].attributes.body
The antennae senses prey.

# data[].attributes.body
CI-Different couloirs of card
WWW-Different shape to other creature
-Aadit

# data[].attributes.body
Www. Is that the wings are different colours and they contrast really well with the main body.
Ebi. Is that the tail could’ve been constructed in a better format.

# data[].attributes.body
This bug has wings shaped differently for its features

# data[].attributes.body
CI- more anteni
WWW-I used similar shades but different backgrounds.
-Aadit

# data[].attributes.body
Www. Is that the colours on my beast reflected very well in the sun, also I like how there are so many varieties of colours.
Ebi. If there was any more time I could’ve added a piece of extra detail.
Kaazim

# data[].attributes.body
WWW: I WAS ABLE TO USE A VARIETY OF COLOURS AND I ADDED BEADED ANTENNA

EBI: I COULD USE SMALLER PIECES AND ADD MORE DETAIL

# data[].attributes.body
Www: I used my creativity to create a mythical mini beast.
Ebi:I should use brighter colours for my creature

# data[].attributes.body
EBI- Use more colours except for purple
WWW- The butterfly wings looked symmetrical

# data[].attributes.body
WWW
College was effective
EBI
Speed up so I get to do eyes.

# data[].attributes.body
Www- they look like twins and have similar feature

CI- they look a little messy but I still like them

True name are dipolatisnubarmswithwingsbigeyessobiginsect

Shortened name is froglotopis

# data[].attributes.body
WWW- I used different colours and patterns on my insect well
EBI- I had a different variety of colours and sizes

Tia

# data[].attributes.body
WWW, I really liked the wings
EBI, I could have added smaller shapes to the wings to add more detail

# data[].attributes.headline
Maxima Disporte (meaning Entertain and Carry way and Maxima means most so this is the insect that carry’s people away and entertains people the most)

# data[].attributes.subject
Maxima Disporte (meaning Entertain and Carry way and Maxima means most so this is the insect that carry’s people away and entertains people the most)

# data[].attributes.body
WWW: I feel like I used a range of colour and I also used wiring to add detail to it
EBI: I could give my insect a better build so it does not have to be stretched when using the packaging peanuts.

# data[].attributes.body
Www-  what went well was it’s not in pieces and it has bright Colours. Also it stands out as it has a clown mouth and it not look wise most eliget. It has a clown mouth and if you don’t like it’s real name I’m sad. It’s real name is sinclownlabigeyeswithmouthandnose but has been shortened to kracorn.

CI- I could of fixed to inteni

# data[].attributes.body
WWW, I really liked the way I used the same colours on all of them
IIT, I could make the antennae a bit more detailed.
They are called Megadytes Vesparum