# data[].attributes.body
Like the C flange is a type of end of the motor

# data[].attributes.body
Is one of two types of ends in the motor

# data[].attributes.body
to make a seal between the raceway and the motor main body.

# data[].attributes.body
The raceway separates power and communication cabling and directs these services where required.

# data[].attributes.body
To close the box for preventing the dust and humidity from entering the terminals.

# data[].attributes.body
To close the box for preventing the dust and humidity from entering the terminals.

# data[].attributes.body
A screw terminal boars is a type of electrical connection where a wire is held by the tightening of a screw.

# data[].attributes.body
to prevent dust and humidity to enetr the terminals

# data[].attributes.body
Extension hoses are used to create a flexible connection between a needle nozzles or hydraulic couplers to a grease gun.

# data[].attributes.body
An enclosure which includes, mounts, and protects one or more terminals or terminal boards;

# data[].attributes.body
Its to protect the fan and the motor for any solid pieces like rocks or paper.

# data[].attributes.body
It rotates with the stator and is for cooling the machine.

# data[].attributes.body
Screws and bolts are used to fasten materials

# data[].attributes.body
A drain plug is a plug which is taken out to allow a fluid to be drained from a tank such as an engine oil pan or sump.

# data[].attributes.body
A squirrel-cage rotor is the rotating part of the common squirrel-cage induction motor.

# data[].attributes.body
The stator frame consists of laminations of silicon steel, usually with a thickness of about 0.5 millimetre.

# data[].attributes.body
A ball bearing is a type of rolling-element bearing that serves three main functions while it facilitates motion: it carries loads, reduces friction and positions moving machine parts.

# data[].attributes.body
The meaning of FALSE BEARING is a bearing (as of a lintel or beam) not directly on a vertical support.

# data[].attributes.body
A circlip is a type of fastener or retaining ring consisting of a semi-flexible metal ring with open ends which can be snapped into place, into a machined groove on a dowel pin or other part to permit rotation but to prevent axial movement.

# data[].attributes.body
Prevents the rotor from bumping.

# data[].attributes.body
An eyebolt combines a threaded shaft (or shank) with a complete, round loop at one end.

# data[].attributes.body
Security bolts (tamper proof bolts) provide a high security fixing solution, either permanent or reusable.

# data[].attributes.body
Relief Fittings are used on gearbox housings and bearings (king pins, universal joints, etc.) where excessive lubrication pressure is not desired.

# data[].attributes.body
Grease fittings are permanently installed by either a (taper) thread or straight push-fit ('hammer in') arrangement, leaving a nipple connection that a grease gun attaches to.

# data[].attributes.body
A cast end shield configured for an electrical machine, for closing a stator opening formed in an end of a frame of the electrical machine