# data[].attributes.headline
I started off with two circles. Then made the rectangle to make the whole face. 

# data[].attributes.subject
I started off with two circles. Then made the rectangle to make the whole face. 

# data[].attributes.body
I decided to use the polygon tool to make sort of a figure around my design and make it have an extra pop to all the other colors. Then created a sort of circle with and added 2 lines sideways and up and down. Then with that added the circles with centers and added that colorful inside to look very cool and for it to be bright. Then after I added some points and used segments to make a interesting not complete triangles. I decided to make the colors be bright colors and pop compared to the background for the polygon tool. And to finish it up I used the outside lines of the outside shape lined.

# data[].attributes.body
This is the front of my car. I started to use the Segment tool and started to make the Acura symbol. after I finished I started making the front of my car.

# data[].attributes.body
This was me messing around with the tools. I had no idea no what to do or a theme. This was just pretty much just a joke.

# data[].attributes.body
This is my dinosaur castle . I used the line tool,segment tool, ray tool,point tool,circle tool and the color tool to get this .

# data[].attributes.body
I made my ¨Carley Ranch¨ brand design by first using the point tool and draw out the c and the r. Then I used the segment tool to draw lines making the form of the c and r. Then I Used line and put lines in just for good look. I changes a few colors and thicknesses to defined my design. And last I added circles in the middle of the c and r

# data[].attributes.body
I started off by first making a triangle and then I made all my shapes and placed them all around the inside of the circle I made. I then changed the colors on my picture.

# data[].attributes.body
I created this by starting with the three circles and then putting the line and segment through it. I chose the colors I did because they look good together.

# data[].attributes.body
I created this design by first creating a circle with a center point. I then changed the symbol, color, and label in the center and changes the circle to have a dotted line. I added a small triangle around the center point of the circle and changed the color. After, I added a line segment, two line segments going through the circle, and two rays. Finally, I changed all the colors and some symbols so everything went together.

# data[].attributes.body
I started by making a circle and then using the polygon tool to make a triangle around it. Then I added a line through the middle of the circle and triangle. Finally I used the segment tool to make two "legs" off the side of the triangle.

# data[].attributes.body
I created thing by making to squares with 2 segments in the eyes and then added a circle with a  center then i made a upside down trapezoid when a line at the bottom

# data[].attributes.body
I started my design with 5 circles and overlapped them using different colors. Then I plotted points around the circles and changed then to plus signs. Next I put three segment lines underneath. Then I put a polygon outlining everything. Finally I out 2 lines on the outside of the polygon and connected them with segment lines.

# data[].attributes.body
I created my design by starting with 4 dots and changing their label to my name. Then I put a segment under the dots. After I put the segment under my name I made a square and put it around my name and changed the color to orange. Then I put a circle around my square and made my circle blue. After my circle I put lines on the outside and changed their colors.

# data[].attributes.body
I used circle for the rim, used polygon for the sauce, used circle for pepperoni, used segments for the knife, used lines for the table, and I used polygon/segments for the chair.

# data[].attributes.body
i created this design with the point and putting them together got to the design and after that i coloring my design with pink and purple.

# data[].attributes.body
I created this design by starting with a hexagon in the middle and added a circle.

# data[].attributes.body
i created this by trying to recreat some type of house. all the lines goin threw it are different places in the house. the way i did it was starting with the polygon so i can change the color of everything then did point,segment,line,ray.

# data[].attributes.body
I started with two circles and added a triangle in the bottom circle. Then I added a line through each of these shapes. Then I added a vertical segment parallel to this line.

# data[].attributes.body
I created this design by starting with the blue polygon, then added a circle in the middle and changed its color. I then added a triangle in the middle of the circle using the line tool. Using the segment tool, I created 2 mini triangles and labeled it's points to spell out "Hello". I also changed the symbol of certain points, such as using the point tool in the middle of the center triangle and changing the point to a triangle.

# data[].attributes.body
I created this design by starting off with a circle. The I added a line through the top of the circle and did a segment somewhat diagnally through the middle of the circle. Then I did a ray through the bottom of the circle and added a polygon to the inside of the circle. Then I made the polygon yellow and renamed some of the points, CAT, DOG, and FISH. The I changed their shapes and colors.

# data[].attributes.body
I created this design by starting off with a medium circle. I added one line down the middle of the circle and then one segment horizontally. I also added 2 rays on the sides of the line. I then added 4 polygons which I changed all their colors. I changed the symbols of the segment points and some of the polygon points and also changed their labels.

# data[].attributes.body
I made my design by putting a bunch of shapes together  and this is what I got.

# data[].attributes.body
To create my house, I went through 3 major steps. The first step was to create the base layout with the segment and line features. Next, I added windows and a door with the circle, polygon, and point features. Lastly, I changed the colors and symbols of the roof, windows and doors for a more aesthetically pleasing look.

# data[].attributes.body
To create my design, I started with one small circle.  Then, I used an outer point as well as the center of that circle to create another circle.  I repeated this process to get 8 congruent circles.  Then, I added some rays, lines and segments through the centers of the smaller circles.  Next, I found the midpoint of the center line segment and used that as the radius of the larger circle.  Finally, I used the regular polygon tool to add the octagon which is inscribed in the larger circle.