# data[].attributes.body
to: arthur06@gmail.com
Subject: How to Repair your Bike by yourself.
Dear Arthur,

I hope you are very well. I am writting to you because you told me before that you had problems with your bike.

You only need a couple of the number 15 spanner or 2 adjustable spanner, some pliers, a box of patches and tire inflator.

Well to start you will need to use the spanners to remove the nuts that hold the tire, then you will need to separate the tire from the neomatic with the help of the pliers, then inflate the tire to locate the hole, when you find it do not lose sight of it and deflate the tire , using the rubber that comes with the patch box, you put a little and then you put a patch and you have to put a little pressure on it and let it rest for 10 minutes and put the tire back with the neomatic and place it on the bike and with the inflator you inflate the tire and it is ready. You didn't have to pay to do this.

I hope you can make it, Good luck.

Andrey Solis A.
Costa Rica.
86-64-19-46
andreysolis10@gmail.com

# data[].attributes.body
To: Anto_98@hotmail.com

Subject: How to Paint the House.

Dear Antonela,

Right now I don't have money to lend you to paint the house, but I know how you can paint it yourself, it's very easy.

The materials you need are;  a roller, a brush, a bucket, adhesive tape and most importantly paint, the color you like best or want to paint the house. I recommend having a ladder nearby so you can paint the higher parts of the wall.

The first thing you have to do is pour paint into the bucket and add a little water if the paint is very thick, but otherwise it is not necessary.  After that you begin to paint with the roller on all the walls, and with the brush you paint places that are difficult to paint with the roller, I recommend giving several passes of paint to the wall and waiting at least an hour for each layer to dry .

something very important that you must take into account is to wear old clothes or that you hardly wear and comfortable.

I hope my advice is helpful.

Yours truly

Leslie Muñoz
michearias08@gmail.com

# data[].attributes.body
To: Mr.Suarez@hotmail.com
Subject: How to repair your Car by yourself
Dear Mr Suarez

I hope you are having a nice week! I am writing to let you know how to repair the car yourself because you told me you had some problems with your car.

You solely need to buy a new wheel, wiper washer and lights

Let’s start you have to put your car in a safe place.

Raise the mobile arm and put it vertically then remove damaged wiper and put the new wiper now repeat the same process with the another wiper and finally Check the operation of the new wipers.
To repair the lights

You have to locate the bulbs to replace front lights are usually located next to the engine and are less accessible. That is why you should wait at least 10 minutes for them to cool down if you have just used the car, turn off all the lights.

Drop the bulb. You must lower the clip or metal wire that holds and holds the lamp steady to be able to extract the lightbulb, eliminating the pressure on its end by making a slight movement to the right.

Replace the bulb. The cap of all the lamps has a series of tabs that indicate the position in which they hook with the wire or clip so that it stays well in the place where it was, either by pressure or by turning a quarter of a turn.

You have to test if the new lights work.

Finally to change the wheel park in a safe place don't forget the parking brake then release the pressure of the studs and lift the car with a hydraulic jack you must remove the tire you are going to change and put the new one and then you have to put the car on the ground and that would be all good luck

Best regards
Alexander Angulo
84-69-02-98
alexanderangulo35@gmail.com

# data[].attributes.body
To: Bob23-06@gmail.com

Subject: How to make a wood stove by yourself.

Dear Bob,

How’re things going?

I hope well, I’m sorry it’s taken me so long to get back to you I've had a lot of work.

I think it’s an excellent idea that you want to build a wood stove in your backyard so you can have barbecues on Sundays.

But come on! How are you going to spend so much money on that?
I'll explain how to do it yourself and you'll save a few dollars.

To build your own wood stove, you first have to take into account the materials and tools you need.

6 bags of 20 Kg of screened earth (fine).
9 bags of screened sand.
1 bag of gravel and a little ash.
1 bag of cement.
4 galvanized pipes for the chimney.
1 chimney cap.
1 tile for the entrance of firewood.
1 metal base to put the fireplace.

To make the mold you need the following materials:

Drawer: Four metal sheets with four rods to adjust it and two more rods to level the pieces.

Metallic mold: For the entrance of firewood.

Combustion chamber: Two metal molds for the griddles.

4 burners
4 metal tubes
2 blades
1 trowel

When you have all this you are ready to start, now I will tell you the step by step.

Step 1. Create the base of the kitchen:

Before building the kitchen it is necessary to have the base or table ready. The standard size is 1.20 m x 1.20 m and 60 cm high. The base can be built with stones, adobe, brick, wood or iron. It can be full or hollow, the latter being the one with the greatest advantages. It is a usable space to store firewood or kitchenware.

Step 2. Drawer assembly:

It is placed on the base with the four metal pieces. We must make sure that the rods fit well in the holes so that the structure does not fall apart.

Step 3. Make the mix:

Mix the sand and soil with the cement until you get a uniform color and add water. Stir until sticky.

Step 4. Filling the kitchen:

Put an insulating layer on the base.
Add gravel to conserve heat.
Pour the first layer of the mixture and press it well.
Place the mold of the firewood entrance and place the tile on top.
Place the combustion chamber mold, adjusting it until the rod passes through each hole and ends up through the drawer.
Second layer of mix.
Third layer of mix. With it, it will be filled up to the level of the holes where the tunnels will go. Finish pressing.
Add more mixture in the place destined for the small stoves.
Place the tunnel molds by drilling or filling, as needed.
Place the base of the tube that integrates the tunnels. The rods must butt against the base.
Last layer of mix. In this part, press until the kitchen is level with the upper part of the drawer.
Smooth the kitchen surface.

Step 5. We remove the mold:

Pull out the two rods above the burners.
Remove the tunnels by unhooking them.
Turn the molds of the small stoves and take them out.
Take the dove out of the large stove and pull it up until the mold is removed.
Remove the rods from the drawer and carefully remove the sheets.
Extract the mold from the firewood entrance.

Step 6. Place the metal molds.

Fit or mold these parts well, sealing it properly to prevent heat or smoke leaks.

Step 7. Place the chimney pipes:

Place them on the base, then tape the tube to the ceiling or wall to prevent it from moving.

Step 8. Turn on the stove:

Before carrying out this step, it must previously be allowed to dry completely for approximately 4 days.

It takes a bit of work but I assure you it is totally worth it.
I was very specific buddy, you can't go wrong, I know you'll do well.
By the way For the kitchen to work properly and have a long life, it is essential to take care of it and carry out regular maintenance.
Always remove the ash, clean the stoves, the flues and the chimney tube from time to time, remove the soot from the flues and gently tap the chimney tube so that the soot falls down and you can remove it.

Anyway, I should get going.
You will do an excellent job if you follow the instructions well.
Don't forget to write me back I want to know the result.
And let me know if you need help.

Best wishes,

Marianela Soto.

# data[].attributes.body
To. Ms. yancity@gmail.com
Subject. Congratulations and Suggestions
Dear Ms Yancy.
My friend, I hope that you and your family are well, I congratulate you for the undertaking of having a nursery with fruit trees, I would love to help you with the loan that you asked me for but at this moment I do not have it, however you told me that the money is to pay a gardening expert, but friend, I'll tell you, my sister is dedicated to growing fruit trees, I've learned from her, so I can advise you so that you can plant the trees yourself.

The first is to determine what type of fruit trees you want, the lemon is the most appreciated, so I recommend you plant lemon trees.

step two. You should plant the trees in late winter. You will need pots, I recommend clay pots because they retain moisture better and have a longer life.

Step three. You must define the size of the pots because every two or three years you will need to transplant them.

Step four. Good drainage, essential for growing fruit trees in pots, for this you can use gravel or volcanic clay. Perlite is a great ally for fruit trees in pots, as it helps to drain while maintaining moisture.

Step Five Choose a rich substrate and fertilize, because potted fruit trees need rich soil. You will also need worm castings to feed the soil.

step six. Take care of irrigation, in quantity and quality of water, every week you should water the trees, hopefully with rainwater. I recommend that you place the pots in a sunny location protected from the wind so that the trees can bear fruit. If you have doubts call me.

Best regards.

Roxana Díaz

# data[].attributes.body
To: PeggyCarter13@gmail.com
Subject: How to do a cabinet for your books
Dear Peggy Carter

I hope you are doing very well making your life in New York.

I am writing to you because i really don't have that much money and what i do have is barely enough for my main expenses, but i can tell you what you have to do without spending so much money.

You need mdf wood, two half centimeter thick with a width of 2.44 and 1.22 in length. You need mdf wood, two half centimeters thick with a width of 32cm and 1.22cm long. You will also need 5 mdf pieces of wood 30cm wide. You make a few small cuts in the big boards because the little ones are going to be placed there.

And the only thing left is to put it together and go.

I hope I've helped you,

Engely Céspedes
702-203-961

# data[].attributes.body
To: marylove24@gmail.com

Subject: How to Fix your computer.

Dear Mary

I hope you are well. I am sorry to hear that you are having problems with your computer again. Why don´t you try to fix it yourself because hiring a technician is very expensive. And Also, some general computer issues can be addressed without seeking professional help. This are some basic steps you can take to repair your computer:

You must back up your files before trying to do anything.  This is the most important step, so you don’t lose important information. You can back up your files to an external hard drive, or a cloud storage service, like iCloud, DropBox, or Google Drive.

You can often fix a computer problem by shutting down the computer, then unplugging it. Then holding down the power button for 30 seconds while the computer remains unplugged. If this didn´t work, you can review your drivers or programs and update them if they are outdated. Computers may freeze because of any hardware or software issue. Notice if the issue started when you connected any hardware like a printer or scanner, or maybe the problem started after you downloaded a program, if your problems started after one or both situations, you should uninstall them.

You also should Check your CPU and memory usage because some programs use to much memory and that can cause your computer to slow down or freeze.

If neither of this recommendations work, you should restore your computer. And don’t forget to have a good antivirus.

I hope my recommendations have helped you. I Will be waiting for an updated in your computer state.

Goodbye, I hope I can visit you soon, I miss you a lot.

Alyssa.

# data[].attributes.body
To: günaydın_zeynep@gmail.com
subject: How to eliminate the frizz hair?
Dear Zeynep

I hope you don't hate me because I still remember the promise I made to you friend but now isn't the best time.
You are an excellent friend so I want to give you the secret of my hair another day you asked me.
Let's do it.
You will need the following things:
3 large tablespoons of flaxseed.
a liter of water.
Only that you really only need these two ingredients.
I imagine you were that you cann't believe it.

You have to leave the flaxseed for 5 minutes in the pot until the water boils and remember you must remove the lid them you need to strain the liquid and separate the seeds after that you should wait for 10 minutes and with clean hair you are going to apply the liquid little by little throughout the hair when you finish that you need to dry your hair and finally you should pass the iron over the hair.

Now everyone will envy your hair.

# data[].attributes.body
To: Arca2427@hotmaiil.com

Subject: How to fix a broken skateboard

Dear Arcangel
In this moment I don´t have the enough resources to pay for your broken skateboard, but I can teach you how to repair it.

The fastest way to fix a broken skateboard is using duct tape.

The problem is that you'll need to overlap the broken parts and then wrap duct tape around the skateboard parts.
The result is a smaller and slightly uneven skateboard that will probably only be useful for cruising around and commuting.

Using duct tape to fix and repair a broken skateboard is the most dramatic solution available.
You can also try using tape-based products that blend industrial-strength fibers and specialized resin to glue and harden your damaged skate.

I hope this helps and I´m so sorry  for not being able to pay somebody to help you with this skateboard and if you need help painting it just call me.

Sincerely Henry Palacios

# data[].attributes.body
Subject: create an installation for a light bulb.

Dear BJ pleasure to greet you.
In response to your email I think it is unnecessary because that is very easy to do I will give you the instructions. You need will going to hardware store and shop
10 meters of cable number #14
1 taype cart
1 base for light bulb
1 switch
1 pvc pipe
1 bulb
1 package plastic ties
And the tools to use are:
Screwdriver, hacksaw, cable cutter and screws.
Next the first need to do is torn off the energy in the room, then into the cable for the pvc pipe and measure where you want to put the bulb.
You need connect the base for light  bulb with the cable, then fasten the tube to the ceiling with the plastic ties , the other side connected switch and place the bulb finally connect the energy to the cable and test if it works fine. Remember to secure the cable with taype at each joint.

Thanks for coming to me, And I hope I have helped.

Isa Matamoros
220-946-6942

# data[].attributes.body
To: engineeringsancho23@gmail.com
Subject: How to check why your internet connection fails

Dear Sancho,

Hope you're having a good time despite the frustrating glitch you're going through. By the way, thanks for the cookies you sent for Christmas, we really enjoyed them.

I don't think it's necessary to spend money on a technician. I am going to explain the steps you must follow to be able to identify what is the problem with your Wi-Fi. They are easy steps that you can follow yourself so you will not need money to solve this tedious problem.
1) Unplug your wireless router and modem from th power source (remove the battery if your modem has a battery backup).

2) Wait for at least 30 seconds.

3) Plug your wireless router and modem back into the power source again (put the battery back to the modem).

4) On your device, reconnect to your WiFi network.

In case that doesn't help, you can try this:
1) Put your router as in the center as possible, and make sure to be as closer as possible to the router, in order to get better WiFi signal.

2) Make sure that there are no obstacles covering upon your router, because that may affect the router’s performance, too.

3) Thick walls can also reduce the WiFi signal and prevent you from connecting to the WiFi.

4) Check any device that may interfere with your WiFi signal, such as: your cordless phone, microwave oven and Bluetooth speaker. If these devices use the same 2.4 GHz or 5 GHz frequencies as your WiFi does, your WiFi signal can be interfered by using the same frequency.
That should be enough to solve your problem.  But in case the problem persists, you can call me and I will gladly give you other useful instructions, so you don't spend money. My number is the same as always.

I hope these tips help you, dear friend and remember that I will always be there for you.

Your truly,

Marderey Angulo.

# data[].attributes.body
To:aaron.guzman@gmail.com

Subject: Paintings on canvas

Dear Aáron It's a pleasure to greet you, it's been a long time since we spoke, right now I can't lend you the money, but I can help you to have an idea to start a business, I'm doing it and the truth is that it's going very well for me, I'll try give as much information as possible so youcan do it too.
You will need canvas
Brushes
Spatula
Yes
Acrylic or oil paint
Palette
Cans with water (acrylics) or paint thinner (oils)
Rags
Before starting to paint you should take these things into account, a ventilated place with light as a piece of advice I give you that the place where you are going to work is comfortable and pleasant, that you feel happy and try to have enough light so that you see what you are doing, my second piece of advice is that you have all the materials that you are going to need close to you so that when you start painting and all your creativity comes out you will not have interruptions, prepare the canvas well you can do it with plaster so that your painting lasts more years and it does not turn yellow, and before you start be clear about what you want to paint and convey with your art, remember that it is not just a painting.
As a recommendation I am going to tell you eight tools that are essential for me, pencil: to be able to create the base on the canvas, also for sketches, eraser: the pencil complement, you will need it to eliminate
errors, sketchbook: for what you can do the sketches well and be clear when painting on the canvas, brushes: you are going to need several of different shapes and sizes, you are going to find your favorites over time, paint palette: it is very important since it will be the base to mix different paints, canvas: you will see many sizes so be guided according to what you are going to paint, painting: there are many types of watercolor paint, oils, acrylics and many
more, you will still know what type to use when you know what draw, and what
techniques are you going to use, easel to paint: the idea is to find a good one that lasts and makes you feel good the hours you spend painting.
Anyway, I think I've already given you all my knowledge on the subject, it's something you can use as a hobby and still help yourself financially, you have to be patient if at first you don't have enough clients
or if you don't have people to support you, everything it is gained over time, you will see that it is! I anxiously await the photos of your works of art, if you need help or any recommendation just call me.

I send you kisses and hugs

Sharon Mendoza
6054-0615
Sharon20ms@gmail.com

# data[].attributes.body
To: Fridabrown03@gmail.com

Subject: How to make a hat headband

Dear Frida

I hope you're well. Thanks for writing me, so you need an accessory for your daugther's costume and you don't have money, that's fine, don't worry. I have a great solution that you can do it, is very easy to do.

You need; scissors, 2 silicone or cold, a sheet of foam, a pice of cardboard, ribbon, a simple headband, a small disposable cup.

First, you have to draw a circle of 30 cm, cut it and paste it on the headband, then paste the cup on the circle, cover it with foam and finally use whatever is within your reach to  decorate it.
And if you want to decorate the hat you can also use pieces of cloth, preferably hot silicone to glue.

I hope you make it. Thanks for inviting me to the party.

Darling Bolaños M.
Costa Rica
71901123
darlinbm9@gmail.com

# data[].attributes.body
Subject: How to change the oil in your motorcycle.

Dear Mario,

I'm very sorry to hear about what happened to your motorcycle.

You should know that the oil of your motorcycle is changed every 2 months, I will explain how you can do it yourself so you do not have any other problem or need to pay for this as it is very easy.
1 Find the right engine temperature.
2 Raise the bike with the second lever.
3 Find the oil drain plug.
4 Change the oil filter.
5 Add new oil.
6 Replace the cap and check the operation.
7 Discard the old oil and clean yourself.
I will also leave you a video to guide you better.
https://www.youtube.com/watch?v=R2_QmbWeVmc

I hope this is helpful to you. Anything you need you know you can contact me again. I send greetings to you and your family, see you soon.

Kimberly Morera.
62250364.

# data[].attributes.body
To: yerlin.fallas@gmail.com
Subject: DIY clothes organizer

Dear, mom. I hope your having a great day! I received your mail asking for help. Right now I don't have money, so I search on Pinterest and I found amazing ideas that you can do at your home and it's with recyclable materials, so you help the enviroment.
A clothes organizer, you can used it for your underwear, socks or the tops that you used to have in that old and ugly plastic chest of drawers.
You're going to need: old shoes boxes, paperboard, scissors, silicone gun, rule, scotch tape and gift paper (with a cute design).
Steps:
1. Cover the boxes with the gift paper.
2. Cut rectangles of paperboard for the divisions of the boxes. (use the rule to measure the size of the divisions)
3.Cover the rectangles with gift paper
4. Paste the boxes and the rectangles with hot silicone
5. Let it dry for some minutes
I recommend you to look for boxes of different sizes, you can use cloth if you think the paper won't last long. If you have problems cutting the paper board with scissors you should use a cutter.
I hope this DIY might help you, I promise to safe money and bring you a new chest of drawers or a closet. If you need more help please tell me.
Wish you the best, love you.

Katetlhen Fonseca Fallas
86022080
katetfonsecafallas@gmail.com

# data[].attributes.body
marcosramirez@gmail.com

subject:  Plastic vase

Hello, Mr. Ramirez, how are you? It's a pleasure to speak with you again. I received your message and I really so sorry

Right now I don't have money to lend you but I can help you with a few things to make your vase, I'm sure you have plastic bottles at home.

Things you will need:

a plastic bottle,pair of scissors,a utility knife,decorate the bottle,a plastic bottle,pair of scissors,a utility knife,a permanent marker,acrylic or spray paint,hot melt glue,

rhinestones,decals.

Step 1

Cut the top of the bottle just below where it curves inward.

Step 2

Level the top of the cut with scissors.

Step 3

Cut strips 2 inches (5 cm) long and ½ inch (1 cm) wide around the bottle.

Step 4

Fold the strips out to open the bottle.
Step 5

Place a strip above the one next to it.

Step 6

Tuck that strip under the next one.

Step 7

Work the same pattern around the entire bottle.

Step 8

Fill the bottle with water and flowers.

I hope this helps you in something and I will be waiting for the photos to see how the vases turned out.
Hugs and kisses. bye

Annika Vindas
71325626