# data[].attributes.body
Today I started checking all the work a have done for tha past 2 months and adding them to my padlet, there are a couple of things that need finishing and I am going to need to get some other work off of one drive to put on padlet aswell.

# data[].attributes.body
Today we had a group meeting and decided some of the shots should be changed so I drew out a new story board including all the new shot angles and scenes that we needed.

# data[].attributes.body
Today We started filming for our advert, I found the role of the sound operator to be not too difficult. I feel I did a good job and look forward to recording the rest of the advert tomorrow.

# data[].attributes.body
Today I started planning my print based and and I now think I have a good idea of what I am going to do for it. Its going to be a picture of someone inside a bottle and a slogan saying something like 'don't let it take over your life. I will do this on Photoshop as it will be the best software to use.

# data[].attributes.body
Today I collected my results that I got from my survey and wrote about them explaining what the results meant and why I believe they where chosen. I now see that using closed questions was the right way to go

# data[].attributes.body
Taday we started off by watching a power point about print based ads, this helped us because after wards we had to go and analyse our own adverts that we found on the internet

# data[].attributes.body
Today in the morning we had a team talk and then we when out and showed people the advert that we made and asked them some questions about it. I went up to people and asked them. No one else in the group wanted to do it so I said I would do it. After this we when to the motion room and Dave showed us the work that we need to do on the tube. After this we got on with the work. I will write up the rest of my work at home so it is not rushed.

# data[].attributes.body
Today we started off with a group meeting and the the producer wrote down everything that was said. In the group meeting we made sure everyone knew what they had to do. After this i had to go and record the sound of a shot glass being put down on the table, i did this by using a tascam and and headphones to get the clearest audio. I then put the sound files on to a USB stick and gave it to the editor. After this I got started on my print based advert and i think I have a good idea as to what I am going to create.

# data[].attributes.body
Today was the final day to complete put everything on my padlet. I think the work I have put n there is to the best of my abilty and I hope that is enough. However I am going to need to finish one piece of work over the weekend because I did not have time to finish it today. Apart from that everything is done

# data[].attributes.body
Today we started off by talking about work experience and i got a few numbers off the internet and am going to call them when I get home. Hopefully they will have work experience available, if not i will have to phone up some other places.
After this we continued with yesterdays work and i drew out the final version of the story board, I made sure to include each shot and draw them as closely to Sam's story.

# data[].attributes.body
Today we started off by watching a power point telling us how we should do our advert. After this we where put in our groups and started discussing how we are going to make the ad and what who's doing what. I was making the story board and created the different shot types and angles. After this we split up and one group searched for actors and my group searched for areas to film. I enjoyed this because it meant I could find places to film to fit my idea of the advert.

# data[].attributes.body
Today we found out what groups we where in a and what roles we are doing. I was given the sound operator role which i was happy with because that was my first choice. We were shown a power point explaining what the sound operator does and i think it looks fun. I feel i have made the right chic in choosing sound operator. After lunch we were given a script and we gave our selves roles to do whilst we created a short clip. I fund this enjoyable.

# data[].attributes.body
In the morning we spoke about work experience and was given advice on finding work experience.
After this we went on the macs and started searching for work experience, i find it quite tough finding work experience through the internet but I'm confident i will find work experience.

After that we where shown all the different roles in the task and we where told to choose one of the roles that we would want to do. I chose sound director because i know little about the subject and would like to learn more about it.

# data[].attributes.body
Today we created mind maps to plan for our print based ad and our TV ad. I chose to do them on anti abuse. I chose this because i think it will be easier than anti drink driving and anti smoking because i wont need a car or a cigarette to put in the advert. I think i could have added more things to my mind maps to fill them out a bit more.
When i make my print based ad i will do it on Photoshop because that is the best softwear for a task like this

# data[].attributes.body
Today we started off by doing a progress report. Then we typed up some questions that we where going to ask the public. We also printed off two pictures that we where going to give to the public and asks them questions about. To ask the questions we went to the town and asks people there, however the location we chose was very quiet and all the people we asked wouldn't answer our questions. Which meant we had to try again after our lunch and this time we did it in the collage campus. After this we edited the footage and created surveys on survey monkey and then posted it on social media.

# data[].attributes.body
Today I continued with my media research.I finished off the tasks that i was on and only have one left. I will complete this task at home because i will have more time and will be able to complete it at a higher standard. This will allow me to be ahead on work next lesson and I will be able to get on with the work i am given next lesson. I also created a picture on photo shop to further my skills on the app.

# data[].attributes.body
Today we looked at a power point about research with Andreas. This tought me that before you release a product you must research the product. We also saw how other companies products failed because they did not put enough research in to it.
After lunch we started using the macs to edit our footage that we recorded a couple of weeks ago. I think that I edited the footage well and it runs smoothly. However whilst editing the footage I realised that we are missing a piece of footage. This was not too much of a problem because it still made sense

# data[].attributes.body
Today we got hands on with photo shop.
In the morning Dave and Cliff explained to us the basics of photoshop so we knew how to get started, then we when over to the Macs and began playing around with some pictures and getting to grips with the software.
I feel confident I can do the basics but i will need more time to be able to create more quality pieces of work. I will also begin practising at home so i can improve my skills so when i come to do work i will be more confident.

# data[].attributes.body
Today we created our own questioner about these anti smoking and anti drinking ads. I when around asking people what they thought about the adverts and got hem to answer the questions, I got a variety of answers and i they will help tabards my research.
I think i could have asked more people to improve my reserch

# data[].attributes.body
In the morning Andreas showed us examples of adverts from different cultures and how they compare.
Today I analysed adverts from different cultures and compared them to see why these techniques where used.

# data[].attributes.body
Today we continued with looking at more film based adverts about anti-smoking/abuse/drinking. In the morning we made a mind map of aides of why these things happen and what the effects are and how they can be avoided.
In the afternoon we analysed more screenshots of anti smoking ads and spoke about the techniques that are used in the ad.

# data[].attributes.body
Today we started off the morning by viewing some examples of print based adverts. This was good because it showed us what professional adds look like.
When we got back from our brake www started analysing our own print based ads and explaining different techniques that where used. I enjoyed this part because we where left to research our own work and could concentrate on doing out task.
Towards the end we did anti abuse/drinking/smoking printed ads and analysed them as well.

# data[].attributes.body
Today we recorded our own movie scene.
In the morning Cliff showed us what we had to do and how we should plan. Later on we created a storyboard which was showing the scenes from the script we where given. we created this to help us act out the scenes. I was one of the actors and had to play lists part because we didn't have a girl in our group. None of us wanted to act but we over come this by giving each other the roles by seeing who is the best at each role. I enjoyed this  because I enjoy creating things such as adverts and films.
I look forward to editing the footage we collected tomorrow and seeing what it looks like.

# data[].attributes.body
In the morning we started off by doing a friend bingo. This was an exercise to help us get to know our own class mates. After this we elected a class representative. I didn't put my self foreward because I wasn't confident I could do a good enough job for the class.
I learned about different media words used to describe a meaning. Denotation is what a picture is showing you, it is the obvious meaning. Connotation is what the picture shows us and what we think it means, it is the hidden meaning. Signifier and signified

In the afternoon we set up lights and camera equipment and learned where to place them and what kind of effects you can create through  lighting. A few examples are: low key lighting, full light, back light and many more.
I found this part quite easy to learn because we where hands on with the lights and we where practising the light angles with a model mannequin in the middle of the room.

# data[].attributes.body
Camera shots
Today we learned how to use the cameras and what types of different shots there are. For example there are:
-long shots
-close ups
-worms eye
-medium shots
-extreme close up
-birds eye view
-high angle
-low angle
and a few more.
In my group we struggled to get a worms eye view because the camera was attached to a tripod, so we removed the camera from the tripod which allowed us to get the worms eye view that we wanted.
Camera skills
We where shown how to activate the grid on the cameras to help us line up our shots. We learned that when taking a photo of someones face you should make sure the eyes are level with the third line.

We where also shown how to focus the camera correctly.
I found it a bit tricky remembering all the controls and buttons to control different things but the more I used the camera the easier i found controlling the camera
Things I enjoyed
I enjoyed the task of taking pictures using each shot type because i was the person directing and telling the actor what position to be in and how to pose. I feel that I did a good job and I would do it again.
Codes & conventions
We learned about codes and conventions which are things that determine what genre of film it is. These can include:
-Props
-Characters
-Setting
-Time setting
-Music
-Sounds
-Language
And many more.
Next lesson
I will try to interact with the class more and make my voice be heard.