# data[].attributes.body
3d펜 전용 필리멘트가있어요
+82 10-3846-9179

# data[].attributes.body
int pre_value=1;
int pre_value2=1;
int count=0;
int count2=0;
int speakerPin = 12;
int numTones = 35;
int tones[] = {1318, 1244, 1318, 1244, 1318, 988, 1174, 1046, 880, 523, 659, 880, 988, 659, 830, 988, 1046,659, 1318, 1244, 1318, 1244, 1318, 988, 1174, 1046, 880, 523, 659, 880, 988, 659, 1046, 988, 880};
void setup()
{
pinMode(7, INPUT_PULLUP); //red switch
pinMode(13, INPUT_PULLUP); // blue switch
pinMode(2, OUTPUT); // red LED 1
pinMode(3, OUTPUT); // red LED 2
pinMode(4, OUTPUT); // red LED 3
pinMode(8, OUTPUT); // blue LED 1
pinMode(9, OUTPUT); // blue LED 2
pinMode(10, OUTPUT); // blue LED 3
Serial.begin(9600);
}

void loop()
{
//Serial.println(digitalRead(7));
int value = digitalRead(7);
int value2 = digitalRead(13);

if(value == 0 && pre_value == 1){
count++;
}
pre_value=value;

if(value2 == 0 && pre_value2 == 1){
count2 ++;
}
pre_value2=value2;

int sum = count - count2;

if(sum >= 3){
digitalWrite(2,HIGH);
digitalWrite(3,LOW);
digitalWrite(4,LOW);

}
if(sum >= 5){
digitalWrite(2,HIGH);
digitalWrite(3,HIGH);
digitalWrite(4,LOW);
}
if(sum >= 7){
digitalWrite(2,HIGH);
digitalWrite(3,HIGH);
digitalWrite(4,HIGH);
for(int i = 0; i < numTones; i++)
{
tone(speakerPin, tones[i]);
delay(300);
}
noTone(speakerPin);
delay(1000);
}
if(sum <= -3){
digitalWrite(10,HIGH);
digitalWrite(9,LOW);
digitalWrite(8,LOW);
}
if(sum <= -5){
digitalWrite(10,HIGH);
digitalWrite(9,HIGH);
digitalWrite(8,LOW);
}
if(sum <= -7){
digitalWrite(10,HIGH);
digitalWrite(9,HIGH);
digitalWrite(8,HIGH);
for(int i = 0; i < numTones; i++)
{
tone(speakerPin, tones[i]);
delay(300);
}
noTone(speakerPin);
delay(1000);
}
if(sum <= 2 && sum >= -2){
digitalWrite(2,LOW);
digitalWrite(3,LOW);
digitalWrite(4,LOW);
digitalWrite(8,LOW);
digitalWrite(9,LOW);
digitalWrite(10,LOW);
}

Serial.println(sum);

}

# data[].attributes.attachment_link.title
What Is OHM'S Law ? [Explained in Under 5 Minutes]

# data[].attributes.attachment_link.title
POKEMON WATER FOUNTAIN (SQUIRTLE) by ladbrotory

# data[].attributes.attachment_link.description
The coolest squirtle ever! Check out the making videohttps://www.youtube.com/watch?v=Mhv9QOlnqUY This is our first attempt at creating something of our own. The pokemon water fountain is printed in one piece. Both a file with and with out supports has been uploaded. Bare in mind the supports are quite thick and hard to remove.

# data[].attributes.attachment_link.description
Cool centipede robot, fully articulated and easy to print!
Reaaaalllly flexible, strong joints, easy to print with a good surface contact with the bed.
Two versions included:
-Centipede complete, with antennas put aside on the bed. (You print everything at the same time.)
-Centipede only (you print…

# data[].attributes.attachment_link.title
제31기 부산대학교 해외봉사단 3d프린터&펜 메이커 사전교육(20220511)

# data[].attributes.body
https://youtu.be/FLrgdpIdb_k?t=191

# data[].attributes.attachment_link.title
[결말포함] 컨닝으로 수천만원을 버는 천재소녀

# data[].attributes.body
Squirtle / Wartortle / Blastoise (Pokemon 35mm True Scale Series) by Irnkman - Thingiverse

# data[].attributes.attachment_link.title
Squirtle / Wartortle / Blastoise (Pokemon 35mm True Scale Series) by Irnkman

# data[].attributes.attachment_link.description
Blastoise evolution line scaled for 35mm. Includes pre-supported files. Support me on patreon.com/irnkman for many more premium video game inspired models.

# data[].attributes.body
https://www.devicemart.co.kr/goods/view?no=1329770

# data[].attributes.attachment_link.keywords[]
저전압소형수중펌프입니다.5v충전기나휴대폰배터리만으로도작동합니다.튜브미포함

# data[].attributes.attachment_link.keywords[]
기계/제어/로봇/모터 > 모터류 > 펌프모터 > 유체 펌프모터

# data[].attributes.attachment_link.description
수중펌프모터 [SZH-GNP155] / 기계/제어/로봇/모터 > 모터류 > 펌프모터 > 유체 펌프모터 / 저전압 소형 수중펌프입니다. 5V 충전기나 휴대폰 배터리만으로도 작동합니다.(튜브 미포함)

# data[].attributes.body
https://www.thingiverse.com/thing:3237820/files

https://www.thingiverse.com/thing:4726040/files

# data[].attributes.attachment_link.description
I took the original design and fixed its issues and smoothed it a bit. It is now printed without any problems.

# data[].attributes.headline
버튼, LED이용 아두이노 게임만들기

# data[].attributes.subject
버튼, LED이용 아두이노 게임만들기

# data[].attributes.body
https://www.devicemart.co.kr/goods/view?no=1360577

# data[].attributes.attachment_link.keywords[]
100mm led lacy 아케이드 버튼 스위치 (색상선택) [szh-lc049]

# data[].attributes.attachment_link.keywords[]
푸쉬스위치/오락실버튼과유사한100mm직경의스위치/내부led포함/4v~12v점등

# data[].attributes.attachment_link.keywords[]
스위치/부저/전기부품 > 스위치 > 푸쉬버튼 스위치 > 조광형 스위치

# data[].attributes.attachment_link.title
100mm LED Lacy 아케이드 버튼 스위치 (색상선택) [SZH-LC049]

# data[].attributes.attachment_link.description
SZH-LC / 100mm LED Lacy 아케이드 버튼 스위치 (색상선택) [SZH-LC049] / 스위치/부저/전기부품 > 스위치 > 푸쉬버튼 스위치 > 조광형 스위치 / 푸쉬 스위치 / 오락실 버튼과 유사한 100mm 직경의 스위치 / 내부 LED 포함 / 4V ~ 12V 점등

# data[].attributes.attachment_link.description
Download files and build them with your 3D printer, laser cutter, or CNC. Thingiverse is a universe of things.

# data[].attributes.attachment_link.description
Download files and build them with your 3D printer, laser cutter, or CNC. Thingiverse is a universe of things.

# data[].attributes.body
https://www.thingiverse.com/thing:5378838

# data[].attributes.attachment_link.title
Venom Symbiotic Spider-Man Web Only. Let's Retract! by iczfirz

# data[].attributes.attachment_link.description
Let's Retract! Spider-Man Web Only. Print at least 150mm height. 3 perimeters. And a really sick life-size print https://www.instagram.com/p/CeW1KgQLOAD/ To show support please like my designs. :P Yet another crazy challenge. Wireframe Deadpool.https://www.thingiverse.com/thing:5401028 https://youtu.be/3KaNmIi_I-Q Time-lapse print video : https://youtu.be/eIzyJ9ddJ_w Time-lapse print video : https://youtu.be/SaA_DnNp9xM https://www.youtube.com/watch?v=kc3DjEcQK34&t

# data[].attributes.attachment_link.title
LEGO Super Mario Kart by Master_of_the_Oregon_Trail

# data[].attributes.attachment_link.description
This is a LEGO Mario Kart made for LEGOs Mario/Luigi/Princess Peach figures. If any problems come up with the file or during print please tell me so I can fix it. HAVE FUN!!!
UPDATE- I have started to print it at 50%… Definitely over-kill, probably should have printed it at less than 50%.
Estimate P…

# data[].attributes.attachment_link.description
Download files and build them with your 3D printer, laser cutter, or CNC. Thingiverse is a universe of things.

# data[].attributes.attachment_link.title
3 DIY Creality Ender 5 Printable Upgrades in 15 minutes or less

# data[].attributes.body
https://www.thingiverse.com/thing:3674315

# data[].attributes.attachment_link.title
Articulated Snake v1 by Onasiis by onasiis

# data[].attributes.attachment_link.description
This object can be printed at once, with no assembly needed after printed. Nos supports needed. Well, it is a little embarrassing for me, but... If you like my designs, please think about donate on my PayPal -> onasiis@gmail.com Thanks! It will help and motivate me to continue creating new and better models.

# data[].attributes.attachment_link.title
Articulated Snake v1 by Onasiis by onasiis

# data[].attributes.attachment_link.description
This object can be printed at once, with no assembly needed after printed. Nos supports needed. Well, it is a little embarrassing for me, but... If you like my designs, please think about donate on my PayPal -> onasiis@gmail.com Thanks! It will help and motivate me to continue creating new and better models.

# data[].attributes.attachment_link.title
Ender 5 Pro | 3D 프린터로 출력해서 3D 프린터 업그레이드하기

# data[].attributes.body
https://www.thingiverse.com/thing:5170695

# data[].attributes.attachment_link.title
Ender-5 Pro Control Panel Back Cover With Air Vents by Speedbomb

# data[].attributes.attachment_link.description
This is a remix of the Ender-5 Control Panel Back Cover with Flange and Cooling Openings by Bai_Memo which is a remix of the Ender-5 Control Panel Back Cover by kilroy01. The original was 2 millimeters to small for the cable plug on the bottom of the control panel of my Ender 5 Pro.

# data[].attributes.body
https://youtu.be/zkuHuvV3rlw

# data[].attributes.attachment_link.title
Amazing DIY 3D Printer Kit - Creality Ender 5

# data[].attributes.attachment_link.description
My second attempt, designing a storage case for 4 micro sd and an sd card or sd card adapter. This version is similar to the original, it uses a little more plastic, but gives a more solid fill when handling it. After printing, it may be necessary to use light force to release the hinge.

# data[].attributes.body
https://youtu.be/6VPRvA48YSw

# data[].attributes.attachment_link.title
Ender 5 And 5 Plus 1st Upgrade Filament holder

# data[].attributes.attachment_link.title
Top 5 FREE and PAID Creality Ender 5 (Pro) Upgrades!

# data[].attributes.attachment_link.title
3 DIY Creality Ender 5 Printable Upgrades in 15 minutes or less

# data[].attributes.attachment_link.authors[].name
초보 메이커의 작은 작업실

# data[].attributes.body
https://youtu.be/5iQMS_AbpAY

# data[].attributes.attachment_link.title
최저가로 확실한 품질향상, 보우덴 프린터의 필수 업그레이드 (Tube clamp)

# data[].attributes.attachment_link.title
Christmas Styled Charmander with Tail Fire by metinoheat19

# data[].attributes.attachment_link.description
Get in the SPIRIT with this christmas themed charmander. I took the model from the Wii version and added a pleasant Christmas hat and a bit of 3d fire for the tail (attribution to kasey3dsparks). I also added small bulbs for eyes since it looks too creepy without them unless you are going to paint.

# data[].attributes.body
https://youtu.be/V1mw4TrvtsI

# data[].attributes.attachment_link.title
Ender 5 Pro | 3D 프린터로 출력해서 3D 프린터 업그레이드하기

# data[].attributes.attachment_link.title
3 DIY Creality Ender 5 Printable Upgrades in 15 minutes or less

# data[].attributes.body
https://www.thingiverse.com/thing:3669438

# data[].attributes.attachment_link.title
Ender 5 Bed Strain Relief - Improved by grizzlyeric

# data[].attributes.attachment_link.description
Improved version of the already excellent strain relief designed by derandi3d. Improvements come primarily in the reduction of stress risers at the interface to the bed. I also removed the bolt and tailored the gap for a snug friction fit on my bed.

# data[].attributes.attachment_link.title
The Best Part Cooler for Creality 3D Printers (Ender 5 Upgrades #8)

# data[].attributes.attachment_link.title
3 DIY Creality Ender 5 Printable Upgrades in 15 minutes or less

# data[].attributes.attachment_link.title
Ender-5 Control Panel Back Cover by kilroy01

# data[].attributes.attachment_link.description
This is just a quick back cover that I threw together for my Ender-5. Printed upright with no supports.
edit - I have had a few people that comment that the tolerances are too tight on this. It was designed to the printer that I have and slides on easily with no play to speak of. As close as I co…

# data[].attributes.body
https://youtu.be/NPo1gPmPF_c

# data[].attributes.attachment_link.title
Creality Ender 5  Upgrades Best of the Best  How to Part 1 My favorite 1st round of improvements

# data[].attributes.attachment_link.title
Ender 5 Pro | 3D 프린터로 출력해서 3D 프린터 업그레이드하기

# data[].attributes.attachment_link.title
Ender 5 Pro | 3D 프린터로 출력해서 3D 프린터 업그레이드하기

# data[].attributes.body
https://youtu.be/g-UXh0Er4cU

# data[].attributes.attachment_link.title
3 DIY Creality Ender 5 Printable Upgrades in 15 minutes or less

# data[].attributes.body
많은 영상들을 찾아 봅시다

# data[].attributes.attachment_link.title
3 DIY Creality Ender 5 Printable Upgrades in 15 minutes or less

# data[].attributes.attachment_link.title
3 DIY Creality Ender 5 Printable Upgrades in 15 minutes or less

# data[].attributes.attachment_link.title
Top 5 FREE and PAID Creality Ender 5 (Pro) Upgrades!