# data[].attributes.body
Ring
The ring can't float, so I have to attach the ring with the planet which has to be strong but also would be better if it is non-seeable. From my product, I saw how distracting it was to see a pillar going through the sphere and the ring. Also the ring is like record plates which has lots of layers, each layers having different colors and gaps between each other.
Color and texture
Since I didn't have a color, most people said that my product didn't look like the Saturn. Therefore I think I should add more colors in my model. Since Saturn's surface which is mostly gas such as helium, methane, I can make the surface of my product soft, also Saturn is really cold, so I can use pewter which feels cold at the first. Since the coldness is really hard to put into a product it will be hard.
Problems
My product will be given to students and they will probably have it on them for a while and if the product is a little bit different to the real Saturn, the students might have wrong knowledge of the feature of Saturn which is really hard to change.

# data[].attributes.headline
I was going to make a moon , but I thought it was too simple, so I changed it to Saturn because it has a ring around the planet. I also considered that if it was printed, the ring will go out so I added a pillar inside the circle touching the ring of the planet

# data[].attributes.subject
I was going to make a moon , but I thought it was too simple, so I changed it to Saturn because it has a ring around the planet. I also considered that if it was printed, the ring will go out so I added a pillar inside the circle touching the ring of the planet

# data[].attributes.body
I should manage to hide the pillar in the middle of the Saturn. The pillar was added to put together the ring and the planet itself, but it's too big which is not pleasing to see.

# data[].attributes.body
Testing method- In this test, we will drop my product from the table and see if my product breaks or does not break. By doing this we can see if the product is appropriate for teaching and if it can endure when it is dropped accidentally.

I need 30cm ruler to measure the hight of the table and I need a pencil holder to put my phone to record the whole process of the experiment. We need tape to fix the ruler on the table.

# data[].attributes.body
I will spin my product as fast as I can, and I will see how long it lasts. This test can help, because actual Saturn also rotate, and since it is made for educational purpose, being good at spinning can help teaching, because by spinning it looks more like Saturn

# data[].attributes.body
I surveyed many people to ask if my product can be recognized and actually be used practically.

Overall, I got comments to add colors and add more detail to my design. I can refer this when making my final model.

# data[].attributes.body
According to survey, I have to add some colors like soil color which represents Saturn. By adding color, it would be more informative for the students who get taught using my product.

# data[].attributes.body
There were also a response which told me to include more details in my product, so in my final product, I will try to add the exact number of the rings; there are three rings in Saturn.

# data[].attributes.body
Since it is one of the planet, it would be used in a science class. Students has to recognize the planet, it should help them visualize the color and the number of the rings it has. It would have a bigger impact touching it, and seeing it close to them when it comes to remembering the name of the planet.

# data[].attributes.body
My target audience is students and when I interviewed them, most of them thought it would be affective for students to learn about how Saturn looks if it is used in a science class.

# data[].attributes.body
Students will have my product as a model. Looking at my model, it will be much easier to understand the features, because it will be known at once which will be much interesting and memorable than words that is hard to understand.

# data[].attributes.body
Topic:Manufacture
Question:How do I print my product?
Possible sources(s)
"SSIS Material design teachers"-1
"https://www.youtube.com/watch?v=Vx0Z6LplaMU"-2
Research type
1-primary
2-secondary

Question:How do I make a sphere on Sketchup?
Possible sources(s)
"https://www.youtube.com/watch?v=tPmu8-gg42g"
Research type-secondary

Question:How can I mass produce my product?
Possible source(s)
"SSIS Material design low temperature casting furnace"
Research type-primary

# data[].attributes.body
Question:How do I print pewter in Makerbot?
Possible sources(s)
"https://www.youtube.com/watch?v=da5IsmZZ-tw"
Research type-secondary

# data[].attributes.body
Globe looks like a ball with words and colors on. Globe is used as a big map when people want to know where the country is. Globe is a minimized Earth which is designed for people to see it. It has different colors which shows different regions and makes it more specific. Also it's sphere, so when you spin it, you can see different countries in one side. A globe is made with plastic since people has to touch it to spin and it must be hard enough not to break. My product will also be sphere, so my product can be influenced by globe. Also, my product is sphere, I can also use the wooden part to make it stand.

# data[].attributes.body
This mannequin is used to see if it fits designs for humans especially in forming and looking designs before they have to mass-produce. Since it looks like human, it can help simulate and help designers to produce new design of certain product. The interesting part of this model is that it has a bendable back which can stay when it is bent. It is much helpful because it will help the designers since if it doesn't stay in that status, it will take longer time for the designers to put it in shape they want. This mannequin is made out of pine wood, and metals to conjoin other parts. Since my product needs some conjunction between the sphere and the ring, I can use the wires used to make this mannequin.

# data[].attributes.body
Telescope is a material used to see things far away. It is normally used to see outer space and the planets. A telescope used by astronomers to observe the details, and also telescope can collect light. Telescope helps people find out new things about Saturn and other planets. This is because telescope magnifies the planets in detail. Telescope has 2 lens to magnify things. Bigger objective lens collects more light which creates much bigger and sharp image. The second lens focuses and magnifies the image. This allows us to see the Saturn in detail such as the color and the assumed texture. Normally, telescope is made with plastic, glass and metal. This is generally made strong since it should not break or have a defection. This is same to my product, so my product can use materials like plastic, metal to make conjunction stronger.

# data[].attributes.body
Artificial satellite is basically a camera that goes around space. It tells us the weather, other planets' shape. It also has missions like navigating, communication, military usage. Human is very closely related to artificial satellite since it allows us to use 3G/4G, navigation. Artificial satellite is made with mostly metal, glasses and plastic. Artificial satellite is very expensive since it is hard to put it up out of the atmosphere. Thus, it should be made as strong as possible. This can be related to my product since my product should be hard enough to endure when people touch it and press it.

# data[].attributes.body
It should include at least two colors to represent Saturn.

It should use more than three different size of materials.
It has to show information of outerspace.
It should have real facts.

# data[].attributes.body
It should be smaller than 160mm x 160mm x160mm. 160mm is about normal phone's height.
It should weigh 180 grams which is about iPhone 6S's weight.
It should have a ring and a sphere.
The ring will be no wider than 10mm.
The ring should not be thicker than 5mm.
The space between sphere and ring would be no smaller than 7mm.

# data[].attributes.body
The ring should be made with strong metals like iron or soft and flexible materials like silicon and hard rubber. Even CD is okay to use as a ring.

The sphere should be made with plastic styrofoam or hard metals.

# data[].attributes.body
The whole product should not break when it is dropped from at least 120 cm. This is the maximum height of any normal table.

The ring should not fall out of the product and ring should show information such as layers they have.

The overall product should be elastic which means to be maintain and return to the shape

# data[].attributes.body
If I use CD as my ring, it would be much easier to get it because CD is  mass produced. If the ring is used with CD, the radius of the sphere should be about 2 cm considering the gap between the sphere and the ring.

If I don't use CD as a ring, it would be hard to get it since I have to make the product. It should be made with injection moulding which prints plastic and metal and glass if we want it.

# data[].attributes.body
Design goal-
I'm going to make Saturn model to teach students in science. My model will be made with injection molding. Injection molding is a method to make a product out of plastic.

This product is Saturn model, so it can be used in science class to help understanding of the texture and the general figure. My figure is needed for students since it will help them a lot to understand outer-space. Whether students can recognize my product or not is important to consider.

It would be hard to get injection moulding machine which might be expensive.

People who specialize science especially space science will be my target audience since they need this to study.

Injection moulding might be hard to prepare. Also the time it needs to be mass produced is long, so it needs lots of time.

I will look at my design specification and see if I followed the specifications.

# data[].attributes.body
Aesthetic
It should include at least two colors to represent Saturn.
It should use more than three different size of materials.
It has to show information of outerspace.
It should have real facts.
The model does represent the Saturn model and have real facts.
The model will include pale yellow and orange.
Size
It should be smaller than 160mm x 160mm x160mm. 160mm is about normal phone's height.
It should weigh 180 grams which is about iPhone 6S's weight.
It should have a ring and a sphere.
The ring will be no wider than 10mm.
The ring should not be thicker than 5mm.
The space between sphere and ring would be no smaller than 7mm.The model is smaller than 160 mm which is about a hand size.
Manufacture
It should be made with injection moulding which prints plastic and metal and glass if we want it.
The ring and sphere can be injection moulded.
Function
The whole product should not break when it is dropped from at least 120 cm. This is the maximum height of any normal table.
The ring should not fall out of the product and ring should show information such as layers they have.
The overall product should be elastic which means to be maintain and return to the shape.
The model will have a pedestal which will make it stand.
The model will be hard to enough not to break.
Material
The sphere should be made with plastic styrofoam or hard metals.
Saturn model will consist of PVC plastic which is often used for plastic designs.

# data[].attributes.body
The product will be injection moulded and produced with plastics. Otherwise, I can use a machine to make globe and moderate the settings to make a Saturn instead.

# data[].attributes.body
Select tool: used to select things in the area or the clicked object

# data[].attributes.body
Circle: It allows me to make Circle or make any shapes that I want to make.

# data[].attributes.body
Push and Pull tool: this is used to make the shape 3D and allows to make it be thic

# data[].attributes.body
Move tool: used to move any shapes or 3D shapes that need moving