# data[].attributes.body
Torque check

# data[].attributes.body
Reset the value

# data[].attributes.body
Exercise it

See due date

# data[].attributes.body
1. Exercise torque wrench

2. Digital Torque Verifier

# data[].attributes.body
DTT

Excercise

Ensure calibration date is correct

Set value to 20% of highest value after use

# data[].attributes.body
Check Calibration Due date

Exercise torque wrench at usage value

Set back to zero after use

Clock DTT

# data[].attributes.body
Check cal due date and reset torque

# data[].attributes.body
Set to minimum value after used, exercise the wrench before usage

# data[].attributes.body
Before

Check general condition

Check Calibration due date

After

Test the torque to ensure it’s still within limit

Set back to 0 after use

# data[].attributes.body
Check for calibration date

Exercise

# data[].attributes.body
Pre Use check:

1. Cal validity

2. No damage

Post Use check:

1. Reset to lowest value

2. Kept back in protective case

# data[].attributes.body
1) Cycle through highest torque value 6 times for mechanical torque wrench

2) Check calibration sticker for torque wrench

# data[].attributes.headline
Need to make it to the highest value and try it 6 times on the tester system

# data[].attributes.subject
Need to make it to the highest value and try it 6 times on the tester system

# data[].attributes.headline
Check for missing screws or loose parts 

# data[].attributes.subject
Check for missing screws or loose parts 

# data[].attributes.body
Before use check cal due date and exercise

After use set to min value

# data[].attributes.body
Before: Check cal date and value of torque wrench is what u need

After: Reset to minimum calibration, keep back in case if not using anymore.

# data[].attributes.body
Check due date, check torque wrench for damage.

Set the torque load to minimum, put in box for safe keeping

# data[].attributes.headline
Post-use test on Digital Torque Verifier

# data[].attributes.subject
Post-use test on Digital Torque Verifier

# data[].attributes.body
Reset torque wrench to minimum value (Not lower than the indicated minimum torque value)

# data[].attributes.body
1. Reset value to lowest

2. Take down serial number for documentation purpose

# data[].attributes.body
check torque wrench if there is any damage

check cal due date

# data[].attributes.body
Verify & record using DTT after usage.

# data[].attributes.body
Before usage:

1. Check for Cal date and condition

2. Exercise torque wrench

After usage

1. Set to minimum value after usage

# data[].attributes.body
Before using check nsd and calibration.

After check if it is back to minimum value.

# data[].attributes.body
Send for repair / calibration.

# data[].attributes.body
Inform TOOLS IC

# data[].attributes.body
Send for calibration

# data[].attributes.body
Send it for re-cal

# data[].attributes.body
Quarantine and send for recal

# data[].attributes.headline
Isolate the torque wrench, make sure nobody use it. 

# data[].attributes.subject
Isolate the torque wrench, make sure nobody use it. 

# data[].attributes.body
Inform TMDE ICs to send it for calibration

# data[].attributes.body
Report to NgKC

# data[].attributes.body
Report to tools IC and send item to calibration.

# data[].attributes.body
Send for Calibration validation

# data[].attributes.headline
Report to Tools IC, stop using the torque wrench and set aside so other people won't use.

# data[].attributes.subject
Report to Tools IC, stop using the torque wrench and set aside so other people won't use.

# data[].attributes.body
Quarantine & not use.

# data[].attributes.body
Verify the accuracy of the torque wrench against the Digital Torque Verifier

# data[].attributes.body
Open Reporting

# data[].attributes.body
Inform TMDE IC/SIC

Send the wrench for calibration

# data[].attributes.body
Tell tmde ic to send out for cal

# data[].attributes.body
Report to Tools IC and send the affected tools for re-calibration

Do not use the dropped torque wrench on maintenance work

# data[].attributes.body
Tell ME3 Tan Chee Keong

# data[].attributes.body
Send for cal

# data[].attributes.headline
Replace the torque wrench with statues lable so no one will use the dropped wrench.

# data[].attributes.subject
Replace the torque wrench with statues lable so no one will use the dropped wrench.

# data[].attributes.body
stop using it and inform tmde ic to send for calibration

# data[].attributes.body
Aflo say so

# data[].attributes.body
The spring is too compressed to give accurate reading

# data[].attributes.body
Most inaccurate range due to the spring and clicking mechanicism not being calibrated

# data[].attributes.body
Might not be accurate and within the required limit for the task

# data[].attributes.body
AFLO say cannot

# data[].attributes.headline
Because torque wrench has a range of +- so if use the lowest, the value maybe below the lowest value.

# data[].attributes.subject
Because torque wrench has a range of +- so if use the lowest, the value maybe below the lowest value.

# data[].attributes.body
Mj say de

# data[].attributes.body
Maintenance Standard

# data[].attributes.body
The internal spring is too loose to give an accurate reading.

# data[].attributes.body
AFLO not allowed

# data[].attributes.body
Inaccuracy of value

# data[].attributes.body
Ineffective of the spring below 20%

# data[].attributes.body
15 * 5 = 75

# data[].attributes.body
5x9.81x15 = TA

TA x 15 / 15 + 4 = answer

# data[].attributes.body
5kg x 9.81 m/s^2 = 49.05N

0.15m x (0.04m/2) x 49.05N = 8.3385Nm

# data[].attributes.body
Breathing is a powerful, effective, and instant way to return the body and mind to the present and experience the many benefits of mindfulness and centering. Williams and Penman (2016) suggest using a three-minute

# data[].attributes.body
15Nm

# data[].attributes.body
15Nm