# data[].attributes.headline
SAMPLE POST Marshmallow Challenge Evaluate- Ms. Thaker

# data[].attributes.subject
SAMPLE POST Marshmallow Challenge Evaluate- Ms. Thaker

# data[].attributes.body
1. See Ms. Thaker's photo below.

2. Height = 38 cm.

3. Yes, the tower held the marshmallow for at least 10 seconds.

4. It took 14 minutes to build.

5. I did not follow my plan exactly but it was pretty close (see my plan photo -->), I made changes while building because my plan was not working.

6. I put the marshmallow on pretty early, like 4 minutes in, and built around it.

7. To improve my tower, I would want to make a larger and stronger base so it could hold more weight. - Ms. Thaker

# data[].attributes.body
This was my original idea for the challenge:

# data[].attributes.body
You can see my evaluate data table from my first attempt at building here:

# data[].attributes.body
My tower:

# data[].attributes.body
This was my plans for the challenge but only plan b worked. I realized that if I wanted to have a tower that was tall and sturdy I had to choose a different plan and go for it.

# data[].attributes.body
mine is 44 cm tall it took 20 mins and it held the marshmallow but i needed extra tape i followed my plan

# data[].attributes.body
this is my plan

# data[].attributes.body
About 50cm tall and took me 18 minutes and held for about five minutes until it fell

# data[].attributes.body
Yes it did hold the marshmallow! My tower was 48 centimeters and it took only 10 minutes to make. I followed my plan yes! My building went well!! And my marshmallow!!!

# data[].attributes.body
I emailed a pic to the teachers. My tower was 37 centimeters and it took me 18 mins to build. I did one thing different than my plan which was the spaggeti that was holding the marshmellow was broken in half instead of the full stick.

# data[].attributes.body
it worked with the hight of 67 cm and it held for five seconds then i touched it and it fell and it did take me 18 minutes.

# data[].attributes.headline
coleete kozerskis marshmallow challenge 

# data[].attributes.subject
coleete kozerskis marshmallow challenge 

# data[].attributes.body
It was 50cm tall it took 18 minutes it fell after
It was able to hold the marshmallow for 10 seconds and fell down right after.
I did put the marshmallow on early.
I mostly stuck to my original design but I had to make the base smaller because I didn't have enough spaghetti.

# data[].attributes.body
-height: 54 cm
-can hold 10 seconds or more
-took 18 mins
-not the plan AT ALL
-put marshmallow on at end only
-might make small changes by adding more string, to make it super secure.

# data[].attributes.body
My tower was 50cm tall and fell down right after class was done.

# data[].attributes.body
This is mine. It is not tall because i was so focused on getting the base right. But yeah! Here it is
--Carolina Gonzalez

# data[].attributes.body
1.Height: 39 cm
2.tower held for 3 hours with marshmallow on top
3.I followed my design mostly
4. put marshmallow on after

# data[].attributes.body
Malia's Marshmallow Challenge

# data[].attributes.body
Marshmallow Challenge tower

# data[].attributes.body
This is mine.
1. It did hold the marshmallow

2.  it was 32 cm.

3. It took me 18 minutes,

4. I did follow my plan exactly. The plan was to have a triangular base and then build straight up.

5. I put the marshmallow on at the end.

6. To make my tower better I would have put the marshmallow on in the middle and not the end so I could build around it.

# data[].attributes.body
Hight=50.8
Yes, the tower held the marshmallow for at l0 min.

it took 21 min to build because I used the extra 3 min to build.

I followed my plan.

I put the marshmallow on at the end.

to make my tower better i would use different tape because the tape did not stick.

# data[].attributes.body
it took me 19 min to make a tower 12 cm tall.

# data[].attributes.body
Height was 81cm. I changed the plan a few times because it fell down twice. It got surprisingly tall.

# data[].attributes.body
Hight 68.5 cm
held for ten seconds.

# data[].attributes.body
It took 18 min and it stood for two hours and it was 26cm tall

# data[].attributes.body
it took 18 mintues then fell and i  picthed it up to get this
i did not follew the plan becuase it fell a part

# data[].attributes.body
my tower

# data[].attributes.body
my tower was 78 cm tall and it took me 18 mins to build and it couldn't stand by itself

# data[].attributes.headline
Hugo's Marshmallow Challenge Structure (A.K.A. The leaning Tower Of Pasta)

# data[].attributes.subject
Hugo's Marshmallow Challenge Structure (A.K.A. The leaning Tower Of Pasta)

# data[].attributes.body
The Final height was 65 cm and it took me 17:47 minutes and it held the marshmallow for over a minute. I put my marshmallow on the top at the beginning and I did not follow my plan exactly because I did not plan to use string.
-Hugo

# data[].attributes.body
Mine was 22cm and it took me 11 mins it did hold the mellow

# data[].attributes.body
The final height was 53 cm (20 1/2 inches) and it took me 17:59 minutes and it did hold the marshmallow for 9 minutes.  I followed my plan exactly. I tried putting my marshmallow on in the middle, then I made it taller and then put the marshmallow on again at the end.   If  I had finished the base faster  I would of kept adding on to the height
-Bex

# data[].attributes.headline
Mine was 30 cm tall and it took me 13 mins to build and it held the marshmallow

# data[].attributes.subject
Mine was 30 cm tall and it took me 13 mins to build and it held the marshmallow

# data[].attributes.body
My tower held the marshmallow for a minute, it took 9 minutes to build. I did not follow my plan exactly, I had to use more spaghetti than I planned.

# data[].attributes.headline
Marshmallow Challenge Plan photo and my Evaluate Table

# data[].attributes.subject
Marshmallow Challenge Plan photo and my Evaluate Table

# data[].attributes.body
This is how I planned to make my marshmallow tower. My chart shows the data from my final try building the tower.

# data[].attributes.body
1: See my picture
2: Height: o cm.
3: I couldn't get it to stand up, unfortunately.
4: It took me 18 minutes to partially build it
5: My original plan was like a cell tower, but I changed my mind when I started, and couldn't come up with a new plan
6: I never got to putting the marshmallow on
7: Next time, I will try to build a base that doesn't slide so much, unfortunately I don't know how to do that.

# data[].attributes.body
1. See my picture below
2. Height: 17.78 cm.
3. Yes the tower held the marshmallow for at least 10 seconds. In fact, it stayed up for more than 5 minutes.
4. It took me 13 minutes to  build it.
5. My original plan was to make my tower like the Eiffel tower but that didn't work so I tried to make it like a cow.
6. I build the creation then I put the marshmallow on top.
7: I will improve on building the tower higher next time.

# data[].attributes.body
my tower was 21 cm tall it didn't hold up very well but it held up for at least 5 seconds

# data[].attributes.body
this is my plan

# data[].attributes.body
this is my evaluate table

# data[].attributes.body
At the start I didn’t know the marshmallow didn’t have to be at the top so halfway through I broke it down and started from scratch it was 56 cm
--Wyatt W

# data[].attributes.body
1.this is my photo and build
2.its height was 32 centimeters
3. It held the marshmallow for 10 seconds
4. It took me 18 minutes to build
5. I didn’t follow my plan at all because I needed stronger pasta and I noticed that immediately.
6. I put the marshmallow on 10 minutes in and noticed it was too heavy.
7. If I wanted to improve it I would add more tape because my tape wouldn’t stick to anything accept itself.

# data[].attributes.body
My plan was to create a triangular tower but unfortunately that didn't work so I made a bigger base so it held the rest of the tower. My tower took 9 minutes to make and is 28 inches tall. It was my second prototype. Below is the link to the photo.

# data[].attributes.attachment_link.description
Get access to files anywhere through secure cloud storage and file backup for your photos, videos, files and more with Google Drive.

# data[].attributes.body
height: 24cm
time: 16 mins
It held for about 1 minute before it collapsed

# data[].attributes.body
Ummm... I did this on a phone so it’s not the longest thing so ya
mine was super good at first it got to 74cm  but when I put the marshmallow on it lower to 1 cm

# data[].attributes.headline
here is my tower it was 51 centimeters and i finished it at 15 mins and it stood for 20 minutes until my cat knocked it over. And if i did it again i would make my base stronger because it was tilting 

# data[].attributes.subject
here is my tower it was 51 centimeters and i finished it at 15 mins and it stood for 20 minutes until my cat knocked it over. And if i did it again i would make my base stronger because it was tilting 

# data[].attributes.body
Here it is

# data[].attributes.headline
Lucas                    Here is my tower 

# data[].attributes.subject
Lucas                    Here is my tower 

# data[].attributes.body
It took 18 minutes to make and stands at 44 cm

# data[].attributes.body
Gus Marshmallow Challenge data table

# data[].attributes.body
My tower was done in 13:08 My tower was 24cm tall.

# data[].attributes.body
My tower measured 40 and 1/2 cm, yes it does hold the marshmallow. I had to hold mine up as you can see. I thought it would a little bit easier but it was challenging. I did follow my plan. It took me about 18 minutes.

# data[].attributes.body
it was about 15 cm.it took me 18 mins. it held for a long time I made a little bit of changes to my plan

# data[].attributes.body
my final product

# data[].attributes.body
The final hight is 43cm ,it took 13 min, it stands up without me holding it.i didnt record how long it stayed up though.i went with my origanal plan but modified it so it could stand.and i put hte marshmellow early.

# data[].attributes.body
50 cm, 18 minutes, held for over 10 seconds, no...i did not follow my plan, yes i put the marshmallow on early, i would not give up one my first plan so i can have more time.

# data[].attributes.body
this is a really bad photo of it but anyways mine was 82cm and it took me 21 mins and it can stand up on its own.

# data[].attributes.body
Watch Annie's response here.

# data[].attributes.body
1.  25 centimeters
2.  It held my marshmallow
3.  took me 14 mins
4. add more legs and make it taller.