# data[].attributes.body
aaron reeds saw horse

# data[].attributes.body
Callum Smith

# data[].attributes.body
C allum Smith

# data[].attributes.body
Jac Lloyd Davies

# data[].attributes.body
TomosJones

# data[].attributes.body
Need to double check my Mortise Gauge when marking joints (especially bridles) to make sure the overall joint is flush,
Not be to aggressive when chiselling out waste to avoid joints being too loose.
Need to make sure the angle of the saw is straight when cutting wood to make sure the cut wood is square

# data[].attributes.body
improve  drawing more accurately on the rod  so that the final piece of work is square. Dont swet the small things

# data[].attributes.body
More accurate Saw skills
Sharpening chisels

# data[].attributes.body
•I need to remember to chisel with the grain.
•Take more care in transferring lines square.
•Chisel accurately to the line.
•Using a rebate plane to accurately at 90 degree angle.
• Always remember face side face edge.

# data[].attributes.body
- need to be less aggressive with saws, letting the teeth do the work.
- more accurate on sawing next to the lines, leaving them on.
- ask the tutor before moving on and make presumptions on what to do and going through with them.

# data[].attributes.body
To improve my work i must make sure i don't cut off the pencil line. I also need too make sure my measurements are correct before cutting so i know they are the right size. Measuring and marking out the rebate correctly. Breakout to the mortice. Rebating two pencil lines. Cleaning off with the 18mm chisel

# data[].attributes.body
-need to make sure the lines are squared properly.
-preventing break out.
-sharpening chisels.
-need to keep pencil lines.

# data[].attributes.body
My weaknesses are:
.chiseling mortises and tenon
.using a dovetail saw
.splitting the wood
.cutting accurately
.marking with a marking gauge.

# data[].attributes.body
- I need to improve my sawing skills so my joints fit perfectly and tight. In order to achieve this i need to take more care and keep focus in the work shop.
- i need to improve my chiseling to make my work look more clean without splitting the wood. In order to improve this I need to understand and use different techniques to chisel properly so i wont split any wood.
- I want to improve my work rate in the work shop because i sometimes fall behind and its mainly because i lose concentration or make mistakes. To archive this target i need to try and focus in the work shop and be a bit less social so i don't make stupid mistakes.

# data[].attributes.body
. mortice and tenon joints
. make sure that my measuring is perfect on the rod before starting the job
. Make sure i use the set square properly so that my work is square.