# data[].attributes.headline
In case you didn't get the message by email - we are moving to Teams for online learning.

# data[].attributes.subject
In case you didn't get the message by email - we are moving to Teams for online learning.

# data[].attributes.body
Info in the file attached.

# data[].attributes.body
Quiz first. Then time to finish up the simulation and complete other work. We will go over it after the break.

Have a fantastic spring break!

# data[].attributes.body
Started "Reactions, Products, and Leftovers" simulation activity.

# data[].attributes.headline
Answers to "Reactions, Products, and Leftovers" simulation - Practice Questions

# data[].attributes.subject
Answers to "Reactions, Products, and Leftovers" simulation - Practice Questions

# data[].attributes.body
These are just the solutions to the last few questions. The actual simulation stuff we will discuss together in class. You can wait to complete this until we do if you are unsure of what to do.

# data[].attributes.attachment_link.title
Reactions, Products and Leftovers PhET Practice Answers

# data[].attributes.body
Reactions quiz today during the short block.

Have a fantastic spring break. See you in 2 weeks!

# data[].attributes.body
Reactions quiz today during the short block.

Have a fantastic spring break. See you in 2 weeks!

# data[].attributes.body
Continuing on with demos after a bit of review on exo/endo reactions.

Finish up the follow-up questions for the lab for next class. The quiz is also next class. Doing the practice in the booklet and the lab follow-up will be good review.

# data[].attributes.body
Continuing on with demos after a bit of review on exo/endo reactions.

Finish up the follow-up questions for the lab for next class. The quiz is also next class. Doing the practice in the booklet and the lab follow-up will be good review.

# data[].attributes.body
A bit on potential energy and endo/exo reactions. Followed by demos and more demos.

Work on the follow-up page for the reactions labs and demos. It's due in 2 classes, but I can help with any questions next class.

Quiz in 2 classes.

# data[].attributes.headline
Answers to "Potential Energy" questions (pg 9)

# data[].attributes.subject
Answers to "Potential Energy" questions (pg 9)

# data[].attributes.body
Finishing up the reactions lab.

Briefly went over exothermic and endothermic reactions + potential energy diagrams.

Started off with the demos. Will see more next class, and have some time to finish the follow up for lab/demos.

Quiz in 2 classes.

# data[].attributes.body
Finishing up the reactions lab.

Briefly went over exothermic and endothermic reactions + potential energy diagrams.

Started off with the demos. Will see more next class, and have some time to finish the follow up for lab/demos.

Quiz in 2 classes.

# data[].attributes.body
Day 1 - Thurs, Mar 11
Day 2 - Fri, Mar 12

What you need to know:
- nomenclature
- word and formula equations, including states of matter
- balancing
- identifying reaction types
- predicting products
- potential energy diagrams for exothermic and endothermic reactions

# data[].attributes.body
Reactions lab - did both SR and DR. I think everyone got finished, or came in to finish up.

Fill in equations for all the reactions for part 2 (DR) and part 3 (demos) for next class!

# data[].attributes.body
More info in the pic. Talk to me if you are interested!

# data[].attributes.body
Reactions lab - did SR and got started with DR. We will have a bit of time to finish up next class at the beginning.

Fill in equations for all the reactions for part 2 (DR) and part 3 (demos) for next class!

# data[].attributes.body
Reactions lab - did SR and got started with DR. We will have a bit of time to finish up next class at the beginning.

Fill in equations for all the reactions for part 2 (DR) and part 3 (demos) for next class!

# data[].attributes.body
Briefly went over sig figs for density lab - make sure you are doing separate steps for adding/subtracting and dividing in all your calculations. Gave the opportunity to redo your calculations - get it in next class!

Continuing on with reaction types and predicting products:
-Double replacement (including solubility of products and whether a reaction happens)
-Neutralization
-Combustion

# data[].attributes.headline
Answers to " Synthesis and Decomposition Reactions - Extra Practice"

# data[].attributes.subject
Answers to " Synthesis and Decomposition Reactions - Extra Practice"

# data[].attributes.body
Optional additional practice with writing formulas of compounds and balancing S+D reactions. If you didn't get one in class, come get one from me.

# data[].attributes.headline
Answers to "Extra Practice/Review" (pg 20)

# data[].attributes.subject
Answers to "Extra Practice/Review" (pg 20)

# data[].attributes.body
You don't need to do this yet - can save for later review.

# data[].attributes.headline
Answers to Combustion Reactions (pg 18-19)

# data[].attributes.subject
Answers to Combustion Reactions (pg 18-19)

# data[].attributes.body
Term is coming to a close - please get missing work in by Friday if you want it to show up for term 2!

# data[].attributes.body
Continuing on with reaction types and predicting products:
-Double replacement (including solubility of products and whether a reaction happens)
-Neutralization
-Combustion

At the end quickly went over sig figs for density lab - make sure you are doing separate steps for adding/subtracting and dividing in all your calculations. Gave the opportunity to redo your calculations - get it in next class!

# data[].attributes.body
Continuing on with reaction types and predicting products:
-Double replacement (including solubility of products and whether a reaction happens)
-Neutralization
-Combustion

At the end quickly went over sig figs for density lab - make sure you are doing separate steps for adding/subtracting and dividing in all your calculations. Gave the opportunity to redo your calculations - get it in next class!

# data[].attributes.headline
Answers to Neutralization Reactions (pg 16-17)

# data[].attributes.subject
Answers to Neutralization Reactions (pg 16-17)

# data[].attributes.headline
Answers to Double Replacement Reactions (pg 14-15)

# data[].attributes.subject
Answers to Double Replacement Reactions (pg 14-15)

# data[].attributes.body
A quick kahoot for review on reaction types.

Went over examples for predicting products for synthesis and decomposition reactions. (should have been mostly review, but practice this!)

In the second half, learned about the activity series (in data booklet) and how to use it to predict whether or not a single replacement reaction will happen.

Finish up with the practice on synthesis/decomposition and single replacement reactions.

# data[].attributes.headline
Reactions - Answers to S, D, and SR reactions (pg 11 + 13)

# data[].attributes.subject
Reactions - Answers to S, D, and SR reactions (pg 11 + 13)

# data[].attributes.body
Corrected and reuploaded

Oops there is still an error. Question 1 on pg 13 should be NR!

# data[].attributes.body
A quick kahoot for review on reaction types.

Went over examples for predicting products for synthesis and decomposition reactions. (should have been mostly review, but practice this!)

In the second half, learned about the activity series (in data booklet) and how to use it to predict whether or not a single replacement reaction will happen.

Finish up with the practice on synthesis/decomposition and single replacement reactions.

# data[].attributes.body
A quick kahoot for review on reaction types.

Went over examples for predicting products for synthesis and decomposition reactions. (should have been mostly review, but practice this!)

In the second half, learned about the activity series (in data booklet) and how to use it to predict whether or not a single replacement reaction will happen.

Finish up with the practice on synthesis/decomposition and single replacement reactions.

# data[].attributes.body
Spent a bit of time going over the density lab follow-up. Work on this for next class!

Started going over reactions - a review of balancing equations, interpreting word equations with state symbols, and identifying reaction types. Continue on the with the practice on pages 5-7 in the new package.

# data[].attributes.headline
Reactions - Answers to balancing, classifying and word equations (pg 5-7)

# data[].attributes.subject
Reactions - Answers to balancing, classifying and word equations (pg 5-7)

# data[].attributes.body
Spent a bit of time going over the density lab follow-up. Work on this for next class!

Started going over reactions - a review of balancing equations, interpreting word equations with state symbols, and identifying reaction types. Continue on the with the practice on pages 5-7 in the new package.

# data[].attributes.body
Spent a bit of time going over the density lab follow-up. Work on this for next class!

Started going over reactions - a review of balancing equations, interpreting word equations with state symbols, and identifying reaction types. Continue on the with the practice on pages 5-7 in the new package.

# data[].attributes.body
Handed out the quiz and went over it briefly. Come in to do corrections - this naming stuff is super important.

The rest of class was time to work on the density lab. Make sure you have the data recorded so you can get to work on the follow-up questions.

The follow-up questions aren't due next class, but get started so we can discuss any questions next class. The graph should be make individually in a spreadsheet application - tutorial is posted: https://youtu.be/k6ms5KJbY6w

# data[].attributes.body
Handed out the quiz and went over it briefly. Come in to do corrections - this naming stuff is super important.

The rest of class was time to work on the density lab. Make sure you have the data recorded so you can get to work on the follow-up questions.

The follow-up questions aren't due next class, but get started so we can discuss any questions next class. The graph should be make individually in a spreadsheet application - tutorial is posted: https://youtu.be/k6ms5KJbY6w

# data[].attributes.body
Handed out the quiz and went over it briefly. Come in to do corrections - this naming stuff is super important.

The rest of class was time to work on the density lab. Make sure you have the data recorded so you can get to work on the follow-up questions.

The follow-up questions aren't due next class, but get started so we can discuss any questions next class. The graph should be make individually in a spreadsheet application - tutorial is posted: https://youtu.be/k6ms5KJbY6w

# data[].attributes.body
Be prepared with your lab notebook.

Day 1 - Fri, Feb 21
Day 2 - Mon, Feb 24

Follow-up questions due:
Day 1 - Thurs, Feb 27
Day 2 - Fri, Feb 28

Link to video graphing tutorial: https://youtu.be/k6ms5KJbY6w

# data[].attributes.body
Quiz first.

Handing back penny % mass lab and going over some parts.

Going over density lab again - we started last class. Focused on data tables and some of the calculations.

Be prepared with title, purpose, materials, procedure, and data tables in your lab notebook for Friday.

# data[].attributes.body
Quiz first.

Handing back penny % mass lab and going over some parts.

Going over density lab again - we started last class. Focused on data tables and some of the calculations.

Be prepared with title, purpose, materials, procedure, and data tables in your lab notebook for Friday.

# data[].attributes.body
Quiz first.

Handing back penny % mass lab and going over some parts.

Introducing density lab - went through the set up and overview of procedure as well as formatting for data tables and some of the calculations.

Be prepared with title, purpose, materials, procedure, and data tables in your lab notebook for Friday.

# data[].attributes.body
Review of naming - PollEV. Be sure you are doing the practice! Quiz will be next class on the booklet.

Extra practice posted. Rest of class time was just for your own practice or working on quiz corrections.

Bring your lab notebook for next class!

# data[].attributes.body
There are two sets of 100 names and formulas. I'd recommend choosing one column to go names to formulas and the next column to do the opposite. All the answers are there.

# data[].attributes.body
Review of naming - PollEV. Be sure you are doing the practice! Quiz will be next class on the booklet, and I will post some extra practice shortly.

Briefly introduced the lab on density. You will have time to work on this after the quiz next class and I will go over a few more details. Bring your lab notebook for next class!

# data[].attributes.body
Handing back the quiz and going over it.

Finishing up with naming - hydrates and acids. We did a bit of practice on PollEV to review. This will be on the quiz next class. Go through the practice. I'll be posting some extra naming practice.

Bring your lab notebook next class.

# data[].attributes.body
Handed back the quiz and went over it. Come in to work on corrections!!

Did some review of naming elements and covalent compounds.

Went over naming hydrates and acids. Had some time to practice. Continue to work on this for next class!

If you have been absent the last couple classes with YOE: we are having a quiz in 2 classes. Be sure to look at the class notes and resources and work through the practice questions on naming.

# data[].attributes.body
Handed back the quiz and went over it. Come in to work on corrections!!

Did some review of naming elements and covalent compounds.

Went over naming hydrates and acids. Had some time to practice. Continue to work on this for next class!

# data[].attributes.body
It was the math presentation - we didn't really do much in class other than a bit of review on naming and time to work on quiz corrections.

Next class we will:
- very quickly go over the quiz (you can come in before if you want to see it and do corrections also!)
- go over naming hydrates and acids ( you'll need to practice this on your own time)
- if time: intro density lab (which you'll have time to work on after the quiz in a couple classes)

# data[].attributes.body
Day 1 - Wed, Feb 19
Day 2 - Thurs, Feb 20

Use the long weekend to make sure you are prepared. Go through all the practice!

More practice is attached - the same file as in "uploaded files"

# data[].attributes.body
Quiz first, then continuing on with review of nomenclature - elements and binary covalent compounds. Work through the questions up to ionic and we will review a bit next class.

Refer to resources posted for some extra help with naming, or come and see me.

# data[].attributes.body
Quiz first, then continuing on with review of nomenclature - elements and binary covalent compounds. Work through the questions up to ionic and we will review a bit next class.

Sorry there hasn't been too much time to work on stuff in class now that we're in the morning. Refer to resources posted for some extra help with naming.

# data[].attributes.body
Quiz first, then continuing on with review of nomenclature - elements and binary covalent compounds. Work through the questions up to ionic and we will review a bit next class.

Sorry there hasn't been too much time to work on stuff in class now that we're in the morning. Refer to resources posted for some extra help with naming.

# data[].attributes.body
Reviewing density calculations. Quiz next class - be prepared!

Starting with nomenclature (naming). Went over ionic compound naming - this should be review. Work through the practice - you will also have some time when you finished with your quiz next class.

See resources column on Padlet for naming if you are less familiar with it!

# data[].attributes.body
Answers to the whole booklet - work through it at your own pace. We will be going through examples in class.

Re-uploaded with corrections.

# data[].attributes.body
Reviewing density calculations.

Finishing up with conversions between degrees Celcius and Kelvin.

Quiz next class - be prepared!

Starting with nomenclature (naming). Went over ionic compound naming - this should be review. Work through the practice - you will also have some time when you finished with your quiz next class.

See resources column on Padlet for naming if you are less familiar with it!

# data[].attributes.body
Reviewing density calculations. Quiz next class - be prepared!

Starting with nomenclature (naming). Went over ionic compound naming - this should be review. Work through the practice - you will also have some time when you finished with your quiz next class.

See resources column on Padlet for naming if you are less familiar with it!

# data[].attributes.body
Reviewing metric unit conversions.

A quick overview/reminder of the concept of density and then doing calculations using it as a conversion factor.

We also did a quick bit on converting between Celcius and Kelvin temperature.

Quiz will be postponed until Monday. We will go over some density stuff next class, but start with some new material also - likely a review of naming.

# data[].attributes.body
Reviewing metric unit conversions.

A quick overview/reminder of the concept of density and then doing calculations using it as a conversion factor.

We also did a quick bit on converting between Celcius and Kelvin temperature.

Quiz will be postponed until Friday. We will go over some density stuff next class, but start with some new material also - likely a review of naming.

# data[].attributes.body
Reviewing metric unit conversions.

A quick overview/reminder of the concept of density and then doing calculations using it as a conversion factor.

Quiz will be postponed until Friday. We will go over some density stuff next class, and we will do a quick bit on converting between Celcius and Kelvin temperature. We will probably start with some new material also - likely a review of naming.

# data[].attributes.body
Answers to the questions on pages 28-30 of the "math interlude" package - handed out as a separate 2 sheets in class.

Errors:
Pg 30 q4. Should be not rounded since zero K is exactly - 273.1500000000... Degrees Celcius. The answer should be 248.226 K

# data[].attributes.body
Reviewing a few questions on unit conversions.

Looking at metric/SI units and conversions. Work through the rest of the booklet for next class. Plan on a quiz in 2 classes.

# data[].attributes.body
Covers everything in the "math interlude" package, including density/temperature additional pages. Emphasis will be on the newer content - unit conversions and density.

Day 1 - Fri, Feb 7
Day 2 - Mon, Feb 10 (see me after next class if you're in YOE)

# data[].attributes.body
Finishing up with intro to unit conversions and going through a few examples.

Looking at metric/SI units and conversions. Work through the rest of the booklet for next class. Plan on a quiz in 2 classes.

# data[].attributes.body
Finishing up with intro to unit conversions and going through a few examples.

Looking at metric/SI units and conversions. Work through the rest of the booklet for next class. Plan on a quiz in 2 classes.

# data[].attributes.body
Answers to questions on pages 24-26 of the "math interlude" package.

Errors:
1.e. should be 378, not 3780
1.j. should be 1.05x10^-3 or 0.00105 ng

# data[].attributes.body
Finishing up the penny lab - the follow-up questions are due next class.

Got started with unit conversions intro. Do the practice on pg 21-22. We will review and do metric conversions next class.

# data[].attributes.body
Answers to questions on pages 21-22 of the "math interlude" package.

# data[].attributes.body
Finishing up the penny lab - the follow-up questions are due next class.

Getting started with unit conversions. Review this and go through a few for practice. We'll spend next class on more examples and practice.

# data[].attributes.body
Finishing up the penny lab - the follow-up questions are due next class.

Getting started with unit conversions. Review this and go through a few for practice. We'll spend next class on more examples and practice.

# data[].attributes.body
Handed back
- Part 1 Test
- Concept maps
- Sig fig and measurement quiz

Come in to do corrections on sig fig quiz!

Discussed some of the gas behaviour examples. The worksheet was due today. Hand in ASAP.

Finished up with a quick first part of a 2 part lab. We will finish up next class.

# data[].attributes.body
Handed back
- Part 1 Test
- Concept maps
- Sig fig and measurement quiz

Come in to do corrections on sig fig quiz!

Discussed some of the gas behaviour examples. The worksheet was due today. Hand in ASAP.

Finished up with a quick first part of a 2 part lab. We will finish up next class.

If you weren't here today, come in to see your tests and quizzes. You can come in on Monday during tutorial time to do part 1 of the lab, or you can do part one in class on Tuesday and come outside of class to finish up.

# data[].attributes.body
Handed back
- Part 1 Test
- Concept maps
- Sig fig and measurement quiz

Come in to do corrections on sig fig quiz!

Discussed some of the gas behaviour examples. The worksheet was due today. Hand in ASAP.

Finished up with a quick first part of a 2 part lab. We will finish up next class.

If you weren't here today, come in to see your tests and quizzes. You can come in on Monday during tutorial time to do part 1 of the lab, or you can do part one in class on Tuesday and come outside of class to finish up.

# data[].attributes.body
Those who were in class either did the quiz or worked on the gas simulations.

If you haven't done the quiz, come during tutorial time.

The gas law data and graphs are due on Monday.

# data[].attributes.body
Due next class:
Day 1 - Fri, Jan 24
Day 2 - Mon, Jan 27

# data[].attributes.body
No prep, however if you are missing Fri, Jan 24 (day 1) or Mon, Jan 27 (day 2) please come in during tutorial time the day before your next class to do a short part 1 of the lab.

# data[].attributes.body
Those who were in class either did the quiz and/or worked on the gas simulations.

If you haven't done the quiz yet, come during tutorial time.

The gas law data and graphs are due on Friday.

# data[].attributes.body
Those who were in class either did the quiz and/or worked on the gas simulations.

If you haven't done the quiz yet, come during tutorial time.

The gas law data and graphs are due on Friday.

# data[].attributes.body
Those who were in class either did the quiz and/or worked on the gas simulations.

If you haven't done the quiz, do it in class Thursday or come during tutorial time.

The gas law data and graphs are due on Monday.

# data[].attributes.body
** Note: quiz postponed due to snow day - you will need to take it on Tues or Thursday next week. If you are missing both classes, come do it during tutorial time.

First, we went over some of the questions from last class.

Continuing on with scientific notation and examples of calculations with it. You should be able to do the practice on pages 15 - 16.

There is extra practice on pages 17-19. You should be able to do all this stuff for the quiz.

Introduced the virtual lab simulation activity for next week. You will have time to work on this on Tues and Thurs next week. It will be due on Mon, Jan 27.

# data[].attributes.body
Some took the quiz today, but next Wednesday (our next day 1) is also OK.

We did some review and introduced the virtual lab simulation with time to work on in class today and next class. It will be due next week Friday.

If you didn't take the quiz this class, you need to take it on Wednesday.

# data[].attributes.body
Some took the quiz today, but next Wednesday (our next day 1) is also OK.

We did some review and introduced the virtual lab simulation with time to work on in class today and next class. It will be due next week Friday.

If you didn't take the quiz this class, you need to take it on Wednesday.

# data[].attributes.body
SNOW DAY!!

Don't fret, we will postpone the quiz scheduled for Friday. Just make sure you're keeping up with what we've done in class so far.

# data[].attributes.body
** Note: quiz postponed due to snow day

Going over some of the questions from last class.

Continuing on with scientific notation and examples of calculations with it. You should be able to do the practice on pages 15 - 16.

There is extra practice on pages 17-19. Quiz next class. Expect some scientific notation, but a bigger focus on the stuff before.

# data[].attributes.body
**Note: quiz postponed due to snow day

Going over some of the questions from last class.

Continuing on with scientific notation and examples of calculations with it. You should be able to do the practice on pages 15 - 16.

There is extra practice on pages 17-19. Quiz next class. Expect some scientific notation, but a bigger focus on the stuff before.

# data[].attributes.headline
Measurement and calculations extra practice - Answers

# data[].attributes.subject
Measurement and calculations extra practice - Answers

# data[].attributes.body
Answers to the questions on pages 17-19 of the "math interlude" package.

Corrections:
4.e. Should be x10^-4 (not positive 4 as the exponent).
7.b. Should be 1280 (I added instead of subtracting the last number)
Sorry!

# data[].attributes.body
Going over the measurements you made last class and a few of the homework questions.

Learning how to do calculations with multiple steps and rounding answers properly with sig figs etc... You should be able to do pages 11-12 of the practice.

At the end, briefly introducing scientific notation. There are a few practice questions on the bottom of page 15 that you can work on for next class.

We will be having a quiz in a couple of classes.

# data[].attributes.body
Answers to practice questions found on pages 15-16 of the "math interlude" notes.

# data[].attributes.headline
Quiz - measurement, sig figs, sci notation

# data[].attributes.subject
Quiz - measurement, sig figs, sci notation

# data[].attributes.body
Day 1 - Wed, Jan 22 (if not written yet)
Day 2 - Tues, Jan 21 or Thurs, Jan 23

# data[].attributes.body
Going over the measurements you made last class and a few of the homework questions.

Learning how to do calculations with multiple steps and rounding answers properly with sig figs etc... You should be able to do pages 11-12 of the practice.

At the end, briefly introducing scientific notation. There are a few practice questions on the bottom of page 15 that you can work on for next class.

We will be having a quiz in a couple of classes.

# data[].attributes.body
Going over a few of the homework questions.

Learning how to do calculations with multiple steps and rounding answers properly with sig figs etc... You should be able to do pages 11-12 of the practice.

At the end, briefly introducing scientific notation. There are a few practice questions on the bottom of page 15 that you can work on for next class.

We will be having a quiz in a couple of classes.

# data[].attributes.body
Started by reviewing measurements and sig figs homework.

Most of class was making measurements using chemistry lab equipment.We will go over it next class and discuss.

The lesson today was on significant figures in calculations - specifically the rules used when adding/subtracting and multiplying/dividing operations.

Work on the questions on rounding and simple calculations on page 10.

# data[].attributes.body
Started by reviewing measurements and sig figs homework.

Most of class was making measurements using chemistry lab equipment.We will go over it next class and discuss.

The lesson today was on significant figures in calculations - specifically the rules used when adding/subtracting and multiplying/dividing operations.

Work on the questions on rounding and simple calculations on page 10.

# data[].attributes.body
Started by reviewing measurements and sig figs homework.

Most of class was making measurements using chemistry lab equipment.

The lesson today was on significant figures in calculations - specifically the rules used when adding/subtracting and multiplying/dividing operations.

Work on the questions on rounding and simple calculations on page 10.

# data[].attributes.body
Answers to practice questions found on pages 10-12 of the "math interlude" notes.
(correction for 2 f. has been added)
Note that 3. n. has an error. The answers should be 1140, not 123.

# data[].attributes.body
Welcome back!

Tests have been marked and grades posted. Hope to be able to hand them back by next week just waiting for a few more to get done.

Today we started fresh with some new stuff. Taking a step back to focus on math skills before applying them to chemistry. It's quite important to your success in the rest of the year, so make sure you're practicing and keeping up!

We did making measurements and and determining number of significant figures. Work on questions on pages 4, 5, and 7 from the new package. Answers will be posted shortly.

# data[].attributes.body
Answers to practice questions found on pages 4, 5, and 7 in the "math interlude" notes.

# data[].attributes.body
Welcome back!

Tests have been marked and grades posted. Hope to be able to hand them back by next week just waiting for a few more to get done.

Today we started fresh with some new stuff. Taking a step back to focus on math skills before applying them to chemistry. It's quite important to your success in the rest of the year, so make sure you're practicing and keeping up!

We did making measurements and and determining number of significant figures. Work on questions on pages 4, 5, and 7 from the new package. Answers will be posted shortly.

# data[].attributes.body
Welcome back!

Tests have been marked and grades posted. Hope to be able to hand them back by next week just waiting for a few more to get done.

Today we started fresh with some new stuff. Taking a step back to focus on math skills before applying them to chemistry. It's quite important to your success in the rest of the year, so make sure you're practicing and keeping up!

We did making measurements and and determining number of significant figures. Work on questions on pages 4, 5, and 7 from the new package. Answers will be posted shortly.

# data[].attributes.body
Test today. Also due: concept map. If you haven't yet, please hand in tomorrow.

Have a fantastic break and see you again in the new year!

# data[].attributes.body
Test today. Also due: concept map. If you haven't yet, please hand in tomorrow.

Have a fantastic break and see you again in the new year!