# data[].attributes.headline
Warning message should only be played if High beam is on inappropriately.

# data[].attributes.subject
Warning message should only be played if High beam is on inappropriately.

# data[].attributes.body
If headlights are on, message re "For safety take off high beam" is played. This should require High beam to be on.

# data[].attributes.headline
Audible Signal when Lane Assist Looses track

# data[].attributes.subject
Audible Signal when Lane Assist Looses track

# data[].attributes.body
This is really sruprising that they didn't think of this as you can get surprised when the car just stops following the lane without letting you know. I know we don't have autopilot but lane keeping assist and Adaptive cruise control on the highway is very usefull but we need to hear when it disconnects. Tesla does it fine with the double "doo-doo"

# data[].attributes.body
- port Blind Spot Camera (side camera's) from the Atto to the Seal. I know we can have the camera's turn on by signaling at low speeds but you have to be bellow 15kmh for it to turn on. Feels like a bug.

- Google Maps (Play Services) port, as well as the Maps in the driver display

- Drivers profile with a shortcut. Where we can set our favorite settings to be changed when driver profile is loaded, either via screen or one of the Steering Wheel buttons

- also steering wheel favorite buttons need more choices instead of those 3. We now have 10 ways to mute the sound but only 1 way to turn of rear/side mirrors defrost

- automatic seat/steering wheel heating based on temperature with an On/Off setting or better with a set outside temperature trigger

# data[].attributes.body
Blind Spot Indicator on HUD should be Amber or Red, not Green.

# data[].attributes.body
The dampers can only be adjusted deep in the menus. No voice control, no bottom row icon button and no swipe down button. Essential for wallowing along freeway without shaking your bones to pieces. Add buttons and voice control to this function.

# data[].attributes.body
Needs an icon for the bottom row of selectable buttons. The front has a dedicated button, a bottom row button and one for the swipe down menu buttons. Only accessible from swipe down buttons.

# data[].attributes.body
System should charge for short time to determine charging speed AC (CS). Using CS & (Departure time (DT) - Condition period (CP)) establish charging start time so battery reaches SoC = 100% at DT-CP.

# data[].attributes.body
The latest OTA seemed to shorten the memory of TSR. Can the time be lengthened or better still be driver/operator amendable, settings Off, 1min, 2min, Perm/Next sign,

# data[].attributes.body
Have just installed a dashcam from Top BYD, all works after rebooting etc, yet the dashcam will not automatically record or loop, it will only record manually for the 40 seconds, 2 mins or 5 mins whichever you select, you have to open the app, press the record button yet it stops after the time has elapsed, does anyone know why this is happening?

# data[].attributes.body
Make Spotify handle multiple user accounts and easy switching between them like on startup, or just link it to the cars user profile

# data[].attributes.headline
Allow interactive maps to be a "wallpaper"

# data[].attributes.subject
Allow interactive maps to be a "wallpaper"

# data[].attributes.body
Allow interactive maps to be a wallpaper.

# data[].attributes.headline
Allow top row of 2506 Infortainment icons to be more customisable. 

# data[].attributes.subject
Allow top row of 2506 Infortainment icons to be more customisable. 

# data[].attributes.body
Allow all icons/sub icons to be hidden & sub icons to renamed. i.e. sub icons of group "maps" has a "work" icon. I no longer work & use this bookmark for different address, so name of icon is misleading.

# data[].attributes.headline
AUC/Automatic Recirculation and Smarter Climate Controls Program

# data[].attributes.subject
AUC/Automatic Recirculation and Smarter Climate Controls Program

# data[].attributes.body
I live in the tropics with varying high ambient temperatures and relative high humidity.

During both the day and night we require rapid cooling and climate control programming smart enough to sense when it needs to sufficiently blow high or low, alternate vent distributions, and quickly open and close air recirculation to prevent window fogging.

Let's say it is blazing hot at 40c outside and it suddenly rains, Seal's climate control is not smart enough to alternate these modes to keep comfortable temperatures and windows fog up rather quickly.

On my 16 & 22 years old BMW (Best climate control systems for this weather in my opinion), the settings are as follows:

20.5c NSF + 18c OSF

Intensive Auto Mode

Recirc on AUC

Face Vent set All the way to Blue

Always cool the cabins quickly equally top to bottom, windows never fogs, and prioritises fresh air and switches quick enough with no exhaust fumes can be smelt during city driving.

Current Settings on my Seal AWD:

20c NSF + 22c OSF (AUTO)

Manual Recirculation override. (Necessary)

Below the set temp, the climate control blows at max all the time with windows fogging up very quickly, yet above that the climate control is not smart enough to blow the passenger cool comfortably.

I think Seal is equipped w/the necessary software and hardware to implement these features (Pollution detection sensors + various ambient UV and temperature sensors) so it could be done.

Or is it too much to ask?

# data[].attributes.body
Most cars that I've driven has this feature. When outside temp is bellow a certain temperature, 10 degrees for example, Seat, Steering Wheel and Rear window heating turns on by themselfs. It would be amazing to have this. Also the quick setting for Seats and Steering wheel on other models as well. Seal 6 doesn't have that with the latest update

# data[].attributes.headline
Add sound notifications for traffic light changes and lead car movemen

# data[].attributes.subject
Add sound notifications for traffic light changes and lead car movemen

# data[].attributes.body
I want the car to play a notification sound when a red light turns green, or when the car in front starts moving while waiting at a traffic light.

# data[].attributes.headline
Want a button to play the pedestrian warning sound only when needed

# data[].attributes.subject
Want a button to play the pedestrian warning sound only when needed

# data[].attributes.body
It would be great to have a button to play the vehicle approach sound only when approaching pedestrians, so we don't have to rely on the horn in quiet areas.

# data[].attributes.body
Not sure if the rest of the Community have experienced it, but when I use WAZE on my iPhone and set a route, the cars Apple Carplay failed to render the map, just shows a black screen with some map components visible on top of it. (Forces me to restart the Waze app on my phone then and try again) - Usually works after 2-3 attempts, but never happened before this update. V2.2.0

# data[].attributes.body
After updating my Seal U (electric) to v2.2.0 the (internal) navigation freezes. I Tried restarting the GUI but no effect. Android Car Navigation is still working

# data[].attributes.body
I like the dark mode but when you use Navigation you can barely see anything in sunlight. The option to change to a normal/daytime scheme for the app would be hugely beneficial.

# data[].attributes.body
It would be great to see the high beam indicator light on the Heads up Display

# data[].attributes.body
For now, lane assist on byd dolphin 2023 is not working very well, even leading to dangerous situations.

# data[].attributes.body
The blind spot indicators in the HUD are displayed in green. I suggest they should be colored orange. Semantically they represent a warning and require attention. Being green, they are too easy to mistake for ADAS symbols and thus be overlooked.

Considering the warning triangles in the side mirrors are already orange, the different color in the HUD is just a bit confusing.

# data[].attributes.body
I would like for a option to manually reset the tire pressure management system, recently I had my tires replaced and my TPMS still thinks the tires are in the wrong location and at the wrong pressure.

# data[].attributes.body
As some (sadly only very few) of the Posts have been fixed for quite a while (like Vmax for Assistend Driving) by BYD, but they are still in the "Feature Request"-column we can consider this board deprecated and nobody cares for this anymore, right?

# data[].attributes.body
If video is available should be visible in App.

# data[].attributes.body
Automatically display of the front camera (preferably with zoom on the traffic light) at the intersection when there is a traffic light.

Especially with the BYD Seal, the traffic light is often obscured by the mirror. At the moment you have to turn the camera on and off manually.

# data[].attributes.body
Since the latest update when using DAB I have to manually select favourites every journey

Notifications on maps work regardless if the option is selected or not

Silly things but attention to detail is a true sign of quality

# data[].attributes.body
To bring more safety it would be awesome that the car could turn the lights on when start to rain. Just put an option on multimedia to enable this feature

# data[].attributes.body
We could have a way to create profiles to set and configure many drive and car configurations by just changing profile, like. If I'm going for a long travel, select a profile that will already set the battery Save, change wheel and brake mode to sport, and car to sport mode, also setting some adas config to a specific configuration. The when in urban traffic, I could have another profile that will change many of those configs again, so you could change many configs with one touch instead of needing to go over many screens and changing things back and forth.

# data[].attributes.headline
Turn headlights automatically when raining 

# data[].attributes.subject
Turn headlights automatically when raining 

# data[].attributes.body
Would be awesome to automatically turn headlights on when start raining

# data[].attributes.body
depending on which remote is used to open the car, preset to that users seat position and android auto/car play connection

# data[].attributes.body
We travel quite a bit with our dogs, and while there is capability to switch on remote air con, turn of child presence, there is no official dog mode like is offered in other bands. I’d really like to see this for the Sealion and Shark range especially, as I’d working dog owners would be more likely to own these vehicles

# data[].attributes.body
Quite a BASIC feature, i know, but that REALLY limits the usability of the BYD that you cant use the CruiseControl while having a trailer (or Biker carrier) on.

# data[].attributes.body
Give Battery Health as a percentage. Preferably be displayed within menu on infotainment screen as not required while driving.

# data[].attributes.headline
Drive “D” to Reverse “R” sound alert change 

# data[].attributes.subject
Drive “D” to Reverse “R” sound alert change 

# data[].attributes.body
Change the reverse gear sound to something more attention catching, make it a voice or configurable.

There is a high risk now when trying to switch from D to R as it does not engage straightaway sometimes and the sound alert would help

# data[].attributes.body
With such a great large screen it should be able to maximise its use by being able to add floating(moveable) widgets/shortcuts.

# data[].attributes.headline
Audio warning when inappropriate action attempted.

# data[].attributes.subject
Audio warning when inappropriate action attempted.

# data[].attributes.body
Today I left the key inside the cabin and tried to lock car. Ofcourse, no lock occurred, leaving me scratching my head why no lock? Would be good if car could identify.

# data[].attributes.body
If we turn on AC heating, and after that heating seat, seat will not work, app will be showing wrong status. Need to refresh few times app, try few next times. Solution, turn on only seat heating, AC will work according to last settings. Problem is bigger when we would like to use function "one tap to.schedule". If we select seat +AC, seat will not work. If we selected only seat, app cannot save it.....useless function

# data[].attributes.headline
Trip A & Trip B should be both viewable & resettable from App.

# data[].attributes.subject
Trip A & Trip B should be both viewable & resettable from App.

# data[].attributes.body
Trip A & Trip B should be both viewable & resettable from App. Am ALWAYS forgetting to do it.

# data[].attributes.headline
Open condenser shutter when remote A/C activated.

# data[].attributes.subject
Open condenser shutter when remote A/C activated.

# data[].attributes.body
Open condenser shutter when Air Conditioning is activated remotely.

A/C doesn't work without shutter open.

# data[].attributes.headline
Remotely turning on A/C should open shutters.

# data[].attributes.subject
Remotely turning on A/C should open shutters.

# data[].attributes.body
Remotely turning on A/C, either Hot or Cold, either real time or scheduling, should open shutter in front of condenser at front of car.

# data[].attributes.body
It has been identified that front shutters in front of A/C radiator don't open if A/C alone is turned on via app.

Work around is to also turn on seat ventilation that triggers shutters to open.

Problem exists as you can't turn on seat ventilation to come on when A/C is Scheduled.

# data[].attributes.body
To add some feeling of uniqueness/customisation, I would love to see an appearance selector for the Seal.

It’s already available for other models, like the Atto 3 and as far as I know, there are no silver Seals available as a stock option. So it makes no sense to have the figure showing a silver model.

Would be great if we could change the colour to personalise it to our vehicles.

Better yet, would be great to have a colour wheel to select through (like Tesla). In case we ever get the car wrapped into a non-stock colour.

# data[].attributes.body
Rear view mirror manually dim(antiglare function)adjusted mirror on BYD IS piece of s***

# data[].attributes.body
Unsure if this was requested before or not. I noticed that my BYD Seal doesn't have a reverse sound that you normally would have in a normal car. Sure i am looking at the screen to see if its in drive or reverse but there's no beep say you are in reverse.

Unless this has been fixed on newer but my car version is on 1.4

# data[].attributes.body
Ability to change AVAS sound for ex. on spaceship or own mp3. Current is like from horror movie...

# data[].attributes.body
Although this system is great security initiative it can do with refining. Key pad requires very precise number selection & slow input. Enlarge area of each number on keypad that is active & reduce time for each selection time take effect.

# data[].attributes.body
Display battery health. Doesn't need to always visible on driver's screen but should be visible (buried in infotainment screen).

# data[].attributes.body
Upgrade SOC settings so its possible to set it to 80% or 90% (now 70%) would be much better to drive more electric range.

# data[].attributes.headline
Allow sign in to google account for default maps

# data[].attributes.subject
Allow sign in to google account for default maps

# data[].attributes.body
Allow users to sign into their google account on the car navi system, this would then allow users to sync destinations from a mobile, access search history, favourite destinations etc.

# data[].attributes.body
Make 'keypad' more responsive. Currently, position of finger on digit has to be exact. Make area around digit that is 'active' larger.

# data[].attributes.body
I own a BYD Seal and would really appreciate the ability to display navigation instructions (turn arrows, directions) on the Head-Up Display (HUD).
This feature would significantly improve safety and driver comfort, as it keeps the driver’s eyes on the road.

Why is this important?
Competitors like Tesla (Model 3/Y), BMW, Mercedes, and Hyundai Ioniq 6 already offer HUD navigation as standard or optional. BYD should implement this to stay competitive and meet customer expectations.

Please prioritize this feature in upcoming OTA updates. Thank you!

# data[].attributes.body
One of the most useful and powerful updates would be that we can use split screen in combination with the settings screen, and actually with all installed apps and settings screens in both landscape and portrait mode.

# data[].attributes.headline
Pause CarPlay audio content when muting on starting wheel

# data[].attributes.subject
Pause CarPlay audio content when muting on starting wheel

# data[].attributes.body
When I need to turn music or podcast volume off using the starting wheel scroll button the volume goes to zero but the content continues playing. This function should pause the content and restart from the same position on the next push

# data[].attributes.body
when key is detected near car car unlocks

# data[].attributes.body
seat memory for sealion6!

# data[].attributes.body
Ability to group settings into modes so selection of mode will set said setting. Contents/importance of modes differs dramatically from owner to owner so leave contents up to owners. BYD should only be involved when setting is not available to owner.

# data[].attributes.body
Allow Passenger Temp Icon (PTI) to be removed to free up space. If PTI removed, Driver Temp Icon (DTI) will control passenger temp as well. Passenger can amend temp the long way. On stop/start both PTI & DTI should revert to DTI setting.

# data[].attributes.headline
MP3 Album Art Glitch: First Song Becomes the “Cover King”

# data[].attributes.subject
MP3 Album Art Glitch: First Song Becomes the “Cover King”

# data[].attributes.body
I’m old skool — I still rip songs, tag them properly, and load my MP3s to USB. But there’s a quirky bug on Media Center app. Whenever I create a folder with songs from different singers under one compilation, only the very first track in that folder manages to display its correct album art. Every other song just hijacks that same cover, even though each MP3 file has its own artwork properly embedded. For context, all songs are tagged with the metadata filled consistently: the album artist in the folder is set as “Various Artist,” the song artist field contains the actual singer’s name, and the album name is tagged as “90s Best.”

# data[].attributes.body
Ability to magnify view from cameras for close parking.

# data[].attributes.body
Rather than having to swipe down and deselect multiple features like Lane Departure, Speed or even delve into the sub menus for cross traffic front braking etc, which takes time especially when you are in a hurry, a single button which could be customised to perform multiple functions would be a great addition.

# data[].attributes.body
It would be nice to have a British (UK) voice option in addition to the American version as per Apple Maps and Google Maps.

# data[].attributes.body
In v2.0, the navigation app doesn't account for a recent charge and therefore won't allow you to navigate to your destination without another stop. The prompts can be turned off but this is not a fix it's a workaround.

# data[].attributes.body
On the Previous Car, Ioniq 5 you could se both AC and DC charging to %.

I charge my car overnight, it would be handy not to guess on the schedule to achieve the desired approx percentage.

unless i have missed it in car setting or App.

# data[].attributes.body
When I bought my BYD Seal car I wanted my Tesla reseller to show me the "SoH"(State of Health) value which should be around 98.5 - 99% (From what I have been told).

Unfortunately, they did not have the right OBD tests to show me this 🙂‍↕️.

It would be terrific if this battery health performance, could be enabled in the "Battery health Check" area in the car.

Some other EV manufacturers have this SoH feature build into the car operating system.

# data[].attributes.body
I have seen some impressive "Christmas Light" 🎄 show cases from Tesla cars when lights (in and outdoor) are moving to the sound of music.

I would like BYD cars to have the same option, by perhaps a special App in the car that enables this and can be turned on/off from the mobile BYD App.

# data[].attributes.body
It would be nice if there is a place where you can see the status of all feature requests, and in which upcoming release they are cobsidered to be released in.

It would also be nice with a "search function" in the various columns. E.g. Instead of the same feature functionality being requested by different people many times, with perhaps slightly different descriptions, only one feature request is made with many votes and comments. Currently, it takes me 20 minutes to scroll through all feature requests to see if any of the improvements I like to see, has been posted by anyone.

# data[].attributes.body
Just as Tesla cars, I would like BYD cars with added Dashcams to have the options to do Dashcam recording when the car is parked. E.g. An Enable/Disabled function.

It would also be nice if the dashcam can be accessed remotely (in a secure mode) with perhaps a timer function, so it times out after x minutes or when you close the app.

# data[].attributes.headline
Store tire sensors without the need to go to the shop

# data[].attributes.subject
Store tire sensors without the need to go to the shop

# data[].attributes.body
Currently when u switch from winter to summer tires this can only be done at a byd shop. Because only they can learn the new sensors .. this should be doable by the owner of the car

# data[].attributes.body
There should be an option to mirror/ show Android auto google maps on the beautiful instrument cluster also(the screen behind the steering wheel) - like in Volvos and some BMWs.

# data[].attributes.body
I own a Seal U and its just 7 months old but am already facing issues with the 12V battery. It runs flat often thus can't start the car. This july 2025 alone the 12V battery has died twice yet it's hot outside. .I drive distance like 140 km a day enough to charge the 12V but the 12V still fails. The service period changed from 20000km to 30000km. Dealer give all kinds of accuses to push it to service period at 30000km. Has anyone faced issues with 12V battery? How did you solve the problem?

# data[].attributes.body
Add the map in the cluster as in the Chinese versions, add more interactive interfaces in the speedometer (At the moment there are only 2), improve the driving modes interface(Something more interactive like presenting a diagram of the car with the respective colors of driving aggressiveness together with a sound appropriate to the driving style) for example.

In general Overall, Make an improvement to the interface more intuitive for the driver.

Allow access to YouTube while driving Allowing access to YouTube while driving is always better than having direct access to what we want to listen to rather than using paid apps like Spotify, and for those who don't pay, having to rely on limited access In certain situations

# data[].attributes.body
Auto lights on when auto wipers have moved 3/4 times in rain.

# data[].attributes.body
I hope this is possible for us

# data[].attributes.attachment_link.title
BYD God's Eye Self-Parking Tested! - Can This Car Really Park Itself Flawlessly?

# data[].attributes.body
I feel like fan speeds are a little weird. It almost always works at speed 2-3, 2 being too low and 3 being too loud. Speed 1 isn't used at all, speed 2 works well when you've been for a long time in the car, speed 3 is too much and it's really loud, 4-5-6 are obviously loud and I feel almost no difference between them

# data[].attributes.headline
Allow A/C temp shortcuts to be removed from icon taskbar.

# data[].attributes.subject
Allow A/C temp shortcuts to be removed from icon taskbar.

# data[].attributes.body
The A/C temp shortcuts are very big (limiting available space) on Infotainment icon taskbar.

Passenger shortcuts should be removable. If passenger shortcut is removed, driver's shortcut should work as "Sinc".

# data[].attributes.body
If PIN is NOT set to mandatory, then key must be present.

There should be an option that either the "PIN must be entered" or the "Key must be present" NOT BOTH

# data[].attributes.body
Would be great to adjust the aircon speed and not only the temperature from the app.

# data[].attributes.headline
Engine sound simulation through sound system

# data[].attributes.subject
Engine sound simulation through sound system

# data[].attributes.body
The idea would be to be able to have a simulation of the sound of a combustion engine through the sound system, as other brands already do, such as the Hyundai Ioniq 5.

# data[].attributes.body
After upgrade no longer able to ask the car to lower the windows to "20%, 40%" etc

# data[].attributes.body
After upgrading to new version the Auto headlight can no longer be turned off.

Even if the stalk is set to off the headlights automatically turn on.

# data[].attributes.headline
Passenger Seat Belt Warning without any passenger

# data[].attributes.subject
Passenger Seat Belt Warning without any passenger

# data[].attributes.body
I'm from Portugal. Passenger seat belt warning always ringing and showing, even with no passenger seated. The only way to stop is to fasten passenger seat belt. Already booked with BYD for June to check.

# data[].attributes.headline
Camera turning on when blinking to left or right

# data[].attributes.subject
Camera turning on when blinking to left or right

# data[].attributes.body
That could be one thing which can increase the safetyness when driving if you can see in the centre screen too that is safe to turn. Probably no big issue to bridge this into table

# data[].attributes.body
There should be a software update that allows us to leave our car after X (adjustable) amount time to autolock. The timer should trigger after meeting the criteria of the car being turned off and with the user leaving the vehicle and closing the door.

# data[].attributes.body
Please add an auto parking feature so my wife will let me buy this car

# data[].attributes.body
It would be great if the car automatically unlocked as you approached and locked when you walked away, without needing to press any buttons. Many modern vehicles already offer this kind of seamless experience. Since the car already has proximity sensing, enabling this behavior should be relatively straightforward. Ideally, the door handle would also pop out automatically, so there’s no need to touch or press anything.

# data[].attributes.body
Would be great if Adaptive Cruise Control can be switching back to Normal Cruise Control.

# data[].attributes.headline
Youtube Music instead of spotify or amazon music. 

# data[].attributes.subject
Youtube Music instead of spotify or amazon music. 

# data[].attributes.body
Maybe woluld be great if YT Music appears like Spotify on the Apps dashboard.

# data[].attributes.body
On navigation auto zoom was disabled, I would like to use my own zoom ratio, but always goin' back to auto zoom automatically.

# data[].attributes.body
Please please please!

# data[].attributes.body
It would be nice to be able to add Android Auto apps to the home Screen and not just Spotify.

# data[].attributes.body
Might be a location thing but there is no Charge Scheduling on my app.

# data[].attributes.headline
Voice command for Android Auto Waze and YouTube Music

# data[].attributes.subject
Voice command for Android Auto Waze and YouTube Music

# data[].attributes.body
I might be missing something but I can't use voice control to activate and navigate with Waze or select tracks with YouTube Music.

# data[].attributes.body
This may not be for all but I find the Speed Set indicator for cruise control to be a bit small and the contrast against the background a bit too light. I would like it a little bigger and bolder. It's also a a little behind the steering wheel. For me not so easy to see the numbers clearly. Yes I wear glasses to read but not drive.

# data[].attributes.body
When accelerating hard and you let go off the speeder, the car continues to accelerate for a short while. That is very dangerous and can cause an accident.

# data[].attributes.body
When I tap the indicator (which gives 3 flashes) and I start changing lanes - the lane assist tries to push me back in my lane.

It should recognise the indicators are flashing and I want to change lanes.

# data[].attributes.body
When restarting the car, some settings (ADAS, AC preferences) are reset, so you need to set things up again - annoying!

# data[].attributes.body
Improve ghost braking by incorporating speed & distance into equation, if slight braking is all that is required don't apply 'hard'.

# data[].attributes.body
should have an option to pre heat the battery while driving so when you stop for a quick dc charge the battery would be already in its optimal temperature for a fast charge and not coldgate

# data[].attributes.headline
Create Definitive list of Audio commands

# data[].attributes.subject
Create Definitive list of Audio commands

# data[].attributes.body
Create a definitive list of audio commands i.e. "Hey BYD"