# data[].attributes.body
Use enough tape around the corners so the base is strong and it will support the cup.

# data[].attributes.body
use an absurd amount of tape

# data[].attributes.body
Have a good base so it will support

# data[].attributes.body
Lower to the ground

# data[].attributes.body
different shapes like triangles are good to have

# data[].attributes.body
Taller bridges are stronger and use alot of tape

# data[].attributes.body
Make sure whatever is supporting your bridge, is strong, if you apply pressure to the bridge when there isn't a strong base it can collapse. Also make sure it isn't too high up.

# data[].attributes.body
To make strong of base, use a triangular base. Or you can use a pyramid base.

# data[].attributes.body
use triangles for base

# data[].attributes.body
Have a steady and sturdy base and use a rectangular or triangular shape make it as sturdy is possible.

# data[].attributes.body
Triangles help also a plan

# data[].attributes.body
add straws to support the base of the legs

# data[].attributes.body
Give alot of support on the bottom of the bridge.

# data[].attributes.body
make sure it does not fall.

# data[].attributes.body
Put most of your straws on the base and use lots of tape. To make it, put at least three straws and tape them together.

# data[].attributes.body
Have the base strong

# data[].attributes.body
Triangles and balanced base

# data[].attributes.body
to make a strong bridge make sure to have a sturdy base & you can try testing if it works by placing a few pencils in it

# data[].attributes.body
You need to have creativity, the maximum amount of straws, and as many tape you can put on the bridge, and a great base

# data[].attributes.body
You need to have a really strong base

# data[].attributes.body
To make a stronger bridge I would advise to make sure your bridge is low (but higher than 4 cm) and has a very sturdy base. Using triangle type shapes in your bridge will make it even stronger.

# data[].attributes.body
Short bridges with a lot of tape.

# data[].attributes.body
Make sure there is support at the bottom so it can stand. Also, a lot shorter bridges were sturdier

# data[].attributes.body
Short bridges work the best. Make sure to have a firm base.

# data[].attributes.body
Make sure it has multiple straws.

# data[].attributes.body
Make sure it has legs.

# data[].attributes.body
You should put a lot of support on bottom

# data[].attributes.body
The stronger the supporting straws the more longer and the more weight it holds

# data[].attributes.body
The cup should be right at 4cm don't make it up high like at 10cm.

# data[].attributes.body
Support it as best as you can. If you don't. Well, let's say you will have about twenty pennies.

# data[].attributes.body
Make a Base for bridge

# data[].attributes.body
Make sure that your legs of your are supporting the cup and they need to be strong

# data[].attributes.body
You need a lot of support on the base for the cup to stand up. If yoiu have a lower bridge, it will be

# data[].attributes.body
make a strong base and make sure your sup is strongly tapped to your bridge.

# data[].attributes.body
Have a steady base.

# data[].attributes.body
use lots of support on the base and keep it not to high up off the floor and don't cheat.

# data[].attributes.body
Shorter bridges are better for holding a bigger amount

# data[].attributes.body
Don't make the bridge's so tall, the smallest one's were the sturdiest

# data[].attributes.body
If I could change anything create a beam that is close to the ground

# data[].attributes.body
The lower the bridges are the more stable they are.

# data[].attributes.body
A beam bridge that is low to the ground is the way to go.

# data[].attributes.body
Tall bridges are not as stable as short bridges so use a short bridge next time.

# data[].attributes.body
The shorter bridges are more durable and have more of a chance of winning the competition than taller bridges because the legs are less sturde

# data[].attributes.body
I would say create a beam bridge. And don't make it super tall. Probably about 4 cm.

# data[].attributes.body
I found out that shorter is better. Our bridge was really tall, and it did not have support on the sides of the cup. This made the bridge tip over after only 4 pennies.

Make sure you put support on the sides of the bridge! Otherwise, it will tip over really soon.

# data[].attributes.body
put a lot of tape on your bridge