# data[].attributes.body
Visual: In this photo there is a lot of colour and tone i cant see much texture in this photo and i don't see a lot of pace either, in my opinion there is too much pink instead of any other colour in the photo.
Technical: Aperture and lighting could be the two main things used in this photo also the shutter speed had to be quick so that was no blurriness as the dog and man walked past in the photo.
Contextual: Why? i believe there may have been some type of fund raiser going on due to everything they are wearing is pink, or maybe it was promoting the fish and chip shop that was there.
How? I think the photographer had the camera on a tripod so that it wouldn't be too shaky also i think the photographer had to wait for a while for the weather to be good, Also i think they had a high shutter speed so when the guy and his dog was walking past it didn't effect the picture.

# data[].attributes.body
Visual: There is many colours in this but the ground is just grey and plain, so i think that makes the colours stand out more.
Technical: Exposure (lighting), aperture and probably photo shop techniques i think are used in this photo to maybe enhance it a bit more. Maybe used the gradient tool on Photoshop to make around the girl darker so that the light was mainly focused on the girl and her clothes instead of the grey floor.
Contextual: Why? I think the photographer did this to show types of fashion, to make a point not everyone likes the same thing or wears the same thing.
How? Well i believe they did it at dusk because they've used flash to make certain spots brighter, or to make the colour stand out more. Where? This could be anywhere in Essex but it looks like Harlow Harvey center.

# data[].attributes.body
Visual: There is small amounts  0f colour,  the clouds look very good as a background for the pole,  i feel the picture hasn't got much in it and looks lonely. Also the texture is very shiny/smooth and there's not a lot of space but your eyes still go to the pole/art in the middle of the photo.
Technical:  i think the photographer used Exposure and aperture, I think the shutter speed had to be a quicker than normal photos due to the clouds moving.
Contextual: Why? I think they took it because it is very art like statue/pole. How? Well i think they did it by either standing there and looking up waiting for the right moment to take the photo or they used a tripod pointing the camera, they probably had to change the exposure so it was perfect.
Where?  This is in front of sport direct in the Harvey center Harlow.

# data[].attributes.body
•objects
pine cone and a feather these are the two objects i used in my photogram.

•Darkroom
The dark room is used for photograms, filming processing and   Darkroom printing.

•Light source
You get rid of the filter so the image is exposed on the photographic printing paper, also the red light get put on whilst the paper is being taken out so the light doesn't expose the photographic printing paper.

•Sheet of glass
There is glass but i didn't need to use it to hold anything flat.

•Photographic printing paper
This only reacts with light so a red lightfliter won't affect this, it is used for photograms and darkroom printing.

•Thermometer
to check the temperature of the chemicals so it is the right temp for the paper to go in.

•Developer
You put the photographic printing paper into the developer and aggravate it leave it in the developer for 2 minutes but continually aggravate it for those 2 minutes.

•Stop Bath
This stops anymore developments happening to the photogram, you put the photogram or dark room prints in here for 30 seconds.

•Fixer
With the fixer you place the photogram in there for 5 minutes The fixer stabilises the image, removing whatever chemicals and enables the imaged to be fixed.

•Measuring cylinders
It measures out the water and chemicals so there the right amount  of the solution for developer, stop bath and fixer.

•Running water
This washes off any other chemicals that are left on the image this should be left in the running water for 15 minutes minimum.
•Developing trays
There are 4 trays big enough to fix around 4 medium sized photos/processes.

•Print dryer
This blows hot air over the image so it drys also you have to be careful of the rollers because the image could get stuck in it.

# data[].attributes.body
•Equipment needed
Universal Enlarger
Universal Developing Tanks and Spiral
Set Of Three 8" x 10" Trays
SafeLight
3 Measuring Cylinders
Chemical Mixer
Thermometer
Print tongues
Pair of flimp clips
Flim Squeegee

•The process
Dilute the chemicals. Most photographic chemicals come in concentrate form, which needs to be mixed with water Mix the water and chemicals together. then we make the developing, stop bath and fixer  once we did that we had to wait for them to be the right temperature Pop open the film canister, remove the film and load it onto the film reel, and place the reel inside the developing tank.This must be in complete darkness. No red safety lights. Then leave it for the right amount of time for each solution. once that is done pull out the reel and take out the film be careful not to put your fingers on it, and put a clip on the top of the film and a weight at the bottom, hang up to dry

•Chemicals
Paper developer concentrate
Fixer

•Problems
people could turn the lights on, film could be put in the wrong solution for the wrong amount of time.

•Solutions
Make sure no one turns on the lights, put in the the right mixer for the right amount of time.

•Final outcomes
I think the final outcome was good i didn't have many over exposed photos or under exposed photos

# data[].attributes.body
•Equipment needed
Photographic printing paper, enlarger, sheet of glass, thermometer, developer, stop bath, fixer, running water, developing trays, measuring cylinders, and a print dyer.

•The process
Put the negative in the enlarger. Make sure the image is in the set square then the pull filter away to see if the image is close and clear enough to see. You higher and lower to focus the image.  then i set the timer before getting a test strip, i left it every 3 seconds once 3 seconds were over the first time i used a black board to cover some of the image so that it isn't affected. the first bit is exposed for 12 seconds. Then I took the test strip over to the developer and put it in and aggravated it for 2 minutes so it developed, i then out it in the fixer which is rubbed in the solution for 30 seconds i put the image into the fixer, and aggravated it a little every now and again for 5 minutes. Once the 5 minutes were up i took the image and moved it over to the running water. I didn't need to really aggravate it as it was only cleansing the image this needs to be in for 15 minutes minimum. once i have done this i found the right time which was 10 seconds as this gave me the right level of exposure to make the image more sharp.

•Chemicals
Developer( to develop the image), stop bath (to stop the image developing any further) and fixer (to curve image stopping it going brown).

•Problems
I faced many problems, many of my test strip were exposed, people turning the light on, tripping over bags that aren't properly put away, no gloves people get any chemicals on their hands.

•Solutions
i change the exposure so the image aren't black, put away bags so like under tables, wear gloves so you don't get chemicals on your hands.

•Final outcomes
I think the outcome was good but i could of exposed the image longer or left the image in the fixer a little longer.

# data[].attributes.headline
Contextual awareness in photography Task 5

# data[].attributes.subject
Contextual awareness in photography Task 5

# data[].attributes.body
Visual:  There isn't much colour to this picture just black and white it look drained and dead.
Technical:  PhotoShop techniques:  contrast and black and white  Lighting: I think they had to wait for a clear day to get this type of photo.
Contextual: why? i think it was taken to represent Harlow and where ever else is on the sign, in think it was a good idea as it also represents Essex.. How?  I think they looked around for a certain location, once they found that location they set up a tripod and waited for the right time to take the photo. Where? Tilegate road cords:
long 51.755665, latt 0.20989051 It has changed since the 1960s so it doesn't look the same.

# data[].attributes.body
To recreate this picture i will go to a fish and chip shop and take a picture of the fronton then building with people in-front of it.i will ask my friends if they could model for me.

# data[].attributes.body
to recreate this picture i will look at different types of sculptures around harlow, At dawn/dusk.

# data[].attributes.body
To recreate this picture i shall ask one of ym friends if they could model an outfit for me and sit on the floor like the person is doing in this picture.

# data[].attributes.body
to recreate this picture i shall find a landscape that may or may not have a sign in it i may not make it black and white. because i think colour would be better

# data[].attributes.body
1.    Photographer influences –
Jon Gibbs
2.    Layout – I shall be taking the photographs in landscape, because it shows more detail

3.    Messages/story – The beauty of harlow/essexs

4.    Equipment is needed & bookings  – Tripod and Camera

5.    Camera techniques –  aperture, and lighting

6.     Editing software - Black and white technique, so the image goes black and white but you are able to make certain part of the photo colour.

7.     Locations –  The forest near princess Alexandria hospital

8.     models – no models

9.    Make up/hair clothes – No make up/hair clothes

10.  Props – No props needed

11.  Transportation – i will walk there as its not to far.

12.  Shooting schedule -  Wednesday 13th April

13. Health & safety - Could be knocked over by cyclists, glass on the floor.

1.  Barriers – Weather could be bad stopping me from doing my photos.

# data[].attributes.body
in the focus group we gave each other points on what they could do with their photo shoot.

# data[].attributes.body
this is the the mood board i did on Essex culture

# data[].attributes.body
we also talked about our ideas with one and other