# data[].attributes.body
G3:

1. Muhammad Shazli Bin Mohd Husni
2. Natasha Ismaliyana Binti Ismail
3. Noor Imran Bin Noor Zam
4. Nor Zahirah Binti Osman Yazid
5. Puteri Nur Farzanah Faghira Binti Kamarudin

# data[].attributes.body
3 route to become Professional Engineer (PE)
Route 1: Professional Assessment Exam (PAE) organised by BEM
Route 2:Professional Interview (PI) organised by Institution of Engineer Malaysia(IEM) / MySET
Route 3: Professional Engineer Exam by Oversea Body .Example: Charted Engineer

# data[].attributes.body
G6
1.  LEE LAI YENG
2.  LIVENESHWARRAN A/L P SANDRA
3.  MOHD MUBASHIR BIN KUNJI MOIDIN
4.  MUHAMAD ATIQ AZFAR BIN AWIS KHARNI
5.  MUHAMAD HAIKAL ASYRAF BIN MUHAMAD FAUZI

# data[].attributes.body
1. MUHAMAD ROSZAINI HAFIZ BIN MAT ROSMAN
2. MUHAMMAD AFIQ IQBAL BIN ZULKIFLI
3. MUHAMMAD AIMAL ZIKRY BIN MOHD NIZAM
4. MUHAMMAD NUR AMIR BIN CHE HAMID
5. MUHAMMAD ZAMIR FATHI BIN MOHAMMAD EFFENDI

# data[].attributes.body
1.Qualifications
- After  graduation, an engineer needs to register with Board of Engineers Malaysia to be a graduate engineer.

2.Experience
- After a few years of practical  experience (supervised by a professional engineer or under mentorship program), the graduate engineer can apply to sit for a Professional Interview (with IEM or direct BEM).

3.Documentation
- If he/she passes the Interview,
he/she can apply to BEM to be a Professional Engineer that entitles him/her to use the title P.Eng.

# data[].attributes.body
G4
1. Rachel Lam Xuan Thong
2. Saw Aik Hong
3. Siti Syakirah Binti Zainaddi
4. Song Jia Xun
5. Afiq Danial Bin Omar

# data[].attributes.body
G5
1. Aliff Aiman bin Leman
2. Andrea Cheang Sheau Shyuan
3. Arfan bin Azman
4. Hanifatul Hairah binti Mohd Hanif
5. Laranya A/P Ravi

# data[].attributes.body
1) An engineer needs to register with Board of Engineers Malaysia after their graduate in order to be a graduate engineer.
2) Practical  experience either supervised by a professional engineer or under mentorship program for a few years are needed, then  the graduate engineer can apply to sit for a Professional Interview with IEM or direct BEM.
3) If the graduate engineer passes the Interview, they can apply to BEM to be a Professional Engineer that entitles them to use the title P.Eng.

# data[].attributes.body
1. Career Development
- A (Professional Engineer) PE license can serve as a deciding factor during the hiring process. When a company is choosing between two equally qualified applicants where the only difference is one has a PE license and the other des not, the hiring manager is more likely to choose the licensed candidate as this highlights one's leadership potential and demonstrate a higher commitment to their profession.

2. Prestige
- When one earn a PE license, one's status is something that can set the person up for success now, and in the future. As licensed professionals, PEs often command greater respect from the public and in the engineering company that understands PEs status the best, those that hold a PE are highly respected.

3. Authority
- For most of the engineers, having a PE license is a requirement to advance and gain greater responsibility. Only a licensed engineer can seal, sign and submit plans and drawings, oversee work in private sector, or serve as a fully qualified expert witness. Many government agencies and academic institutions emphasize the importance of a PE license.

4. Flexibility and security
- A PE license can provide greater job security during industry downsizing or outsourcing. It can also be expand your career options outside the traditional corporate environment by enabling one to start our own business. In order to become an engineering consultant or private practitioner, a PE license is a requirement.

5. Work anywhere in the Asian/world
- Since the PE and Fundamentals of Engineering (FE) exams along with the minimum registration requirements are standardized nationally, professional engineers can work in any state they choose. Although a professional engineer must register with the state's board of engineering and may need to complete additional requirements, PE licenses generally can be used throughout the country.

# data[].attributes.body
Professional Engineer is a term referred to a qualified engineers practicing with license from the Board of Engineers Malaysia (BEM). Is is also known as PE. PE is a person who is governed by regulatory laws when performing his duties as an engineer. To become a professional engineer, we must have sufficient experience in terms of complete training in all aspects of professional engineering in a certain amount of time. PE only can be upgraded from graduate engineer and not register as a PE.

# data[].attributes.body
Professional Engineer is known as PE and it is referred to qualified engineers practicing with license from the Board of Engineers Malaysia. A professional engineer is a person who is governed by regulatory laws when performing his duties as an engineer. Only graduate engineer who demonstrate his capabilities as engineer for a sufficient period of time are permitted to be upgraded to professional engineer.

# data[].attributes.body
1. Passed the Professional Assessment Examination conducted by the Board of Engineer Malaysia(BEM)
2.  As corporate member of IEM and fulfilled the requirements as below:
- obtained 3 years practical experience which included:

at least 2 years of general training

at least 1 year of professional career development and training

at least 1 year of the above training must be obtained in Malaysia under the supervision of a PE in the same branch of engineering.

- attended satisfactorily the required courses determined by BEM.
3. PE from an oversea Regulatory Body.

# data[].attributes.body
1. Mirza Syazana Bt Mohazrifi
2. Amisha Bt Nazari
3. Mohamad Aziat Bin Muhamad
4. Md Fuzaimi Izani bin Md Fauzi
5. Ku Muhd Husaini bin Ku Halim
6. Haizatul Aqilah Bt Mat Sidek

Who is the Professional Engineer

A Professional Engineer(PE) is an engineer who has been licenced to practise engineering by a state board of registration. The PE licence is the engineering profession's highest level of competency, a mark of accomplishment and quality assurance. The first step toward that aim is passing the FE Exam. To become a certified Professional Engineer, you must follow these four steps:
-Complete an engineering programme that is ABET-accredited.
-Pass the FE (Fundamentals of Engineering) test with flying colours.
-For four years, you'll be an engineer.
-Pass the PE test (Professional Engineer) (you cannot take the PE exam without first passing the FE exam).

# data[].attributes.body
PE stands for Professional Engineer, and it refers to certified engineers who hold a licence from the Malaysian Board of Engineers. When fulfilling his or her obligations as an engineer, a professional engineer is bound by regulatory legislation. Only graduate engineers who have demonstrated their engineering ability for a sufficient period of time may be promoted to professional engineer.

# data[].attributes.body
Group 8
1. MUHAMMAD ZHAFFUAN hensem BIN MOHD SHAH
2. NIK NADZIRIE BIN NIK KAMARUZAMIL
3. NUR SYAKIRAH BINTI TAJUDIN
4. NURUL 'AAISYAH BINTI KAMALUDIN
5 NURUL ANIS BINTI FADZIAL
6. SATES RAJ A/L JAYARAJ

# data[].attributes.body
Professional Engineer is known as PE and it is referred to qualified engineers practicing with license from the Board of Engineers Malaysia. A professional engineer is a person who is governed by regulatory laws when performing his duties as an engineer. Only graduate engineer who demonstrate his capabilities as engineer for a sufficient period of time are permitted to be upgraded to professional engineer.

# data[].attributes.body
1. Passed the Professional Assessment Examination conducted by the Board of Engineer Malaysia(BEM)
2.  As corporate member of IEM and fulfilled the requirements as below:
- obtained 3 years practical experience which included:

at least 2 years of general training

at least 1 year of professional career development and training

at least 1 year of the above training must be obtained in Malaysia under the supervision of a PE in the same branch of engineering.

- attended satisfactorily the required courses determined by BEM.
3. PE from an oversea Regulatory Body.