# data[].attributes.body
Add another canteen

Add more workers

Divide the lines

Preparations beforehand

Get rid of the line completely and just deliver the food to class

At two places for the lines to start from

Make it so that there is no ID check

No lunch orders to begin with

Go to the shops instead

China town

Make your food at school

Make your food at food tech

# data[].attributes.body
Have you ever had to spend half of your lunch waiting in line to get your food at the canteen? Well, my friends I will make that problem disappear. I will make another building specifically for the canteen to make sure you don't have to wait long. To make things even better I will increase the amount of staff working in the new canteen. Double production, Quicker lines, and better food.

What a deal am I right !!!!!

# data[].attributes.body
The spinoff project is assignment that is based on a issue that is in our community and we have to find a creative solution to it.

Then we have to design a informercial that shows what's the problem is and a solution to it.

In this assignment we have to add ETHOS,PATHOS,LOGOS.

# data[].attributes.body
for the first lesson, we were introduced to what action project was and what we do in the course itself.

After we were told why it's important too as it gives us the:

Entrepreneurship

21st Century Skills

Follow your interests

we were also introduced to our assignment in the fuiter:

Task 1: Spin Off Project

Task 2: INNOV8 Marketing Pitch

Task 3: INNOV8 Expo

# data[].attributes.body
for this we go into groups and innovated ideas and we pitched it to the class.

soon after we also worked in groups to respond to prompts that the teacher showed and to respond to it.

# data[].attributes.body
In the first week i have learnt what action project is about and what it improves in my learning moreover i have also learnt a few key concepts in brain storming ideas.

# data[].attributes.headline
What was the redesign your partners lunch time activity?

# data[].attributes.subject
What was the redesign your partners lunch time activity?

# data[].attributes.body
This activity consisted us on working with a partner and assessing what their lunch times were like and from this we recorded both positives and negatives .

after which were were to get all the negatives and find solutions to make their lunch time better.

After this we were to make a speech and pitch this to the class in a small presentation can include drawings and other images to support the pitch.

# data[].attributes.body
We were also made to show empathy and to work with the problem in a way which was empathetic too.

# data[].attributes.body
We also brainstormed a bunch of ideas for 1 idea which we deemed the most suitable one to solve and find a solution to.

# data[].attributes.body
This task consisted us on brainstorming up ideas on how to shave a monkey weather it was ethical or non ethical and was humane or not.

# data[].attributes.body
At first, we decided to make groups of 3 and then discussed problems in our area which in our case was in Gilles plains and was health and wellbeing.

after this, we delved into the problem a little more and decided to make this a part of our infomercial.

# data[].attributes.body
After doing research on our topic and deciding on making a fast food sort of outlet where you can exercise and eat healthy meals too.

From this we then made the script for out own separate roles and we started to make our video and film it.

# data[].attributes.body
after which we recorded all the segments which included a part with both ethos logos and pathos. we did this by including facts and also statistics as well as promotion. We also used interviews to add to it to make it more trustworthy.

# data[].attributes.body
However we did lack in where we didn't include music which did make it less attractive towards people to watch it and if they were to watch it to stay interested or invested in it.

# data[].attributes.body
Throughout this assessment, I have gotten a thorough understanding of how and in what sort of ways we can brainstorm ideas for our problem. Moreover to delve deeper into the problem itself to find the root causes and to also make simple solutions to those problems to help with the bigger problem itself.

I have also learned to work coherently with group members to come up with solutions to our problems.

# data[].attributes.body
This week for the first lessons the teachers explained and showed us what an infomercial is and how it uses ETHOS, LOGOS, and PATHOS to capture the audience and to also to make it more factual. Whilst also advertising your idea as the best idea.

# data[].attributes.body
In this task we are to find a global problem and delve delve into the causes of problem and who, why and how its effecting people around the world and specifically people too who live in a under developed countries.

We were to find this problem from one of the 17 goals on the un goals website, from this we picked one idea.

In addition to this we are to in the future make a presentation pitch a solution to his problem as a group with a solution which could i.e. be a modal online or handmade one.

we were to also present this on stage with actual judges and to back it up via possible investors and lots of benefits. Whilst also making it affordable for a idea which is starting out at first.

# data[].attributes.body
So far we have researched individual goals and made a small presentation on we were to present to our partners or classmates at our table about a solution to the problem. After which in the future we are to research in-depth to then form a solution that we back up with research to prove that it is a very good solution to the problem.

# data[].attributes.body
On which soon after chasing goups for hte project it self only consisting of max 4 peope and minimum of 3 people. with our gorup being 3 people

# data[].attributes.body
This is also done whilst keeping things relatively realistic and simple. as solving smaller problems and root causes of bigger problems help in solving the bigger problem. Whilst also making it accessible to the specific place that we are going to be focusing onto implement our solution.

# data[].attributes.body
United nations problems and we chose a topic to do research on topic of choice.

# data[].attributes.body
For instance while doing this research i discovered that countries which solely produce energy from fossil fuels are either remote islands for instance Tonga, or have their economy built based on fossil fuels as the cheapest and best way to produce energy.

# data[].attributes.body
After doing research and forming groups last term. Me and my group members started to work on getting together the base of our pitch for a small presentation we will do in front of the class in the future.

# data[].attributes.body
At first, we decided to make a small wind turbine that harnessed the wind to produce energy and plan to send this to Tonga.

Tonga is a small isolated island in the south-east of Fiji. The main source of power for the people of Tonga is fossil fuels.

As shown by the information above tonga heavily relies on fossil fuels to give them power to run their communities.

The main reason we wanted to send small portable wind turbines was to help them go full clean energy. To do this we decided that we must start small.

# data[].attributes.body
We did some planning and research on if our product will be viable and if transportation of this good would cause problems or not. We also deduced that since Tonga receives a lot of wind, we thought that small wind turbines will allow them to produce a descent amount of energy to run their houses on.

# data[].attributes.body
In this week we still continued on with our pitch up until week 4. this week though we did encounter some problems and we did change our idea quit a bit. yet still we managed to get research done on our new topic.

# data[].attributes.body
At first, we were going to go with just making a portable wind turbine that people could assemble by themselves and could supply a descent amount of energy too.

However, with careful research, we discovered that our idea had a bunch of flaws. which range from :

expenses

size

transportation

availability

production

inefficiency(main problem)

These were mainly due to the size and bulkiness of having a mini wind turbine with us. Furthermore, size and transportation fees will further stop production as mass transportation of the goods will cost more than what they are sold for.

# data[].attributes.body
one major issue we encountered was efficiency. through out making the pitch we discovered that tong was a island which is covered in sunlight and since they receive so much of it using solar panels would be far more efficient and with cost for materials and shipping it far outweigh the pros from the cons and was the superiors choice for our product to be.

# data[].attributes.body
From this, we also decided to expand and broaden our product to a wide range of customers/buyers. Focusing on one island isn't going to solve much of a problem in renewable energy.

Since our solar panels are module and are 25%cheaper than your conventional solar pannel it is a far better investment for those who want to start off with renewable energy and know that they won't be wasting thousand of dollars on solar pannels

# data[].attributes.body
Modular

You can take multiple of our solar panels and connect them from end to end to increase efficiency.

Portable

Our solar panels are small roughly being about a allowing you to put them in any space. For instance a balcony on an apartment and if u don't have much space in your back yar deather, Your front garden or even a front porch.

and since ours is comes with a small box with all the parts you can take it with you camping or any other place you want to travel even putting it on your electric vehicle to charge while on a long road trip.

Cheap

Made from aluminum and other cheap yet strong materials size also allows to cut down on wasted materials allowing it to be cheaper. (25% than a regular solar pannel)

efficient

It produces a great 5KW of power per solar panel being able to decently power your house and other appliances you may have it plugged into.

# data[].attributes.body
In this week we finalized our presentation with all our information and our script as well as a presentation.

# data[].attributes.body
After listening to other presentations and waiting on our turn we presented. From which we talked about our issues and what solutions we came up for it along with our product which at the time was designed in fusion 360.

We sowed and stated all of this in our slides

# data[].attributes.body
along with our scrip we made a small presentation to go with it showcasing our product our solutions and the problems which our solutions are for.

# data[].attributes.body
Addressing the problem and showing the solutions to them as shown in the image above.

# data[].attributes.body
Showing costs for consumers and staring price for our business,as well as funding and marketing.

# data[].attributes.body
Efficiency of our design features and ECT

# data[].attributes.body
After pitching to the class and our teachers they gave us some pints to improve on and to add to our presentation before the Expo.

# data[].attributes.body
Cost benefits

Talk about the environment (add environmental benefits to reducing carbon)

Logo

Efficiency (selling)/comparison

Rehearse

Product design

Explaining in clarity about the differences

Make brochures

Make website

Redesign Sunblox on fusion

Develop efficiency slide

# data[].attributes.body
From week 5 through out seven we worked on just adding more information to our slides and working on our 5 minute presentation if were were to get into the finals.

As well as our one minute presentation.

# data[].attributes.body
In this pitch, we addressed all the problems and solutions, benefits and purpose of our product.

# data[].attributes.body
this is just a much more simplified version of the 5-minute pitch to address people and to pitch to customers.

# data[].attributes.body
As shown in the image this was going to be our final product

# data[].attributes.body
Along with the production of our pitches we made a few posters to showcase information to people walking past us and to capture their attention with bold fact or relatable problems.

# data[].attributes.body
the poster also addresses our marketing plans our prices and the efficiency of our solar panels. It also has sleek color patter to it to make it look sleek and to grab their attention.

# data[].attributes.body
along with our other poster which showcases lots of information about our product and its purposes for people to look at and instantly get their attention.

# data[].attributes.body
With this we also added a brochure for our customers to take a close up look at and read some important facts and information about our product as well as advertising it.

# data[].attributes.attachment_link.title
Green and Peach Plants Playful and Illustrative Landscape University Research Poster

# data[].attributes.body
We aimed for a minimalistic look which captured the audience and the judges.

# data[].attributes.body
On this week Thursday was when we presented. we presented to both the judges and parents and teachers. Our posters were all hung up and we were well organized.

# data[].attributes.body
Furthermore when the judges came over to judge us we explained our product well and showed the problems we are trying to fix showing them the solutions and then the product it self. Showing how efficient, portable and modular it is. As well as answering any questions they had for us.

# data[].attributes.body
From this experience i gained a lot of knowledge on presenting and talking about a product as well as what challenges i may face through doing it.