# data[].attributes.body
When you are editing audio, it is very important that the audio flows and it isn't obvious that cuts have been made.
To make this easier, you adjust the blue bar on the top and make this shorter. This expands the audio and makes it easier for you to edit out specific points. This makes it easier to edit out the gaps between conversations, rather than cutting off the first sound by mistake and making it obvious a cut has been made.

# data[].attributes.body
You can keep an eye on how much your cutting by looking at the time limit on the screen. This is helpful if the audio can only run up to a certain time or you have to remove a certain amount of audio.

# data[].attributes.body
Copping on Adobe Premier Pro is actually quite simple. You need to drag and select the section you want, then press command X to get rid of the footage.

# data[].attributes.body
In order to fit the selected times, you can increase and decrease the volume if you cannot use more of the footage.
If it's less than 100 it decreases the speed, but if it's higher it increases the speed.
This can also be used to suit the tone of the scene. Since you can use the footstep walking sound effect to make it seem they are walking slower and quieter.

# data[].attributes.body
If you download MP4 clips rather than MP3. Editing audio is still very possible so not to worry.
Instead, what you will need to do is the usual "I" and "O" to crop out the footage you don't want. Then after you have dragged it onto your editing bar. Right click and select "unlink", then right click again on the top pale blue bar and click "cut". This will you leave you with the audio you want and you can edit this same way as you would an MP3.
A key difference is that the MP3 footage is green and the MP4 footage is blue.

# data[].attributes.body
The clips can be easily found if you search up their titles.
What you will need to do next is to copy and paste it onto your student drive by dragging it. After that you can delete the original on the mac. Then when you get the footage, all you need to do is to select "import files" and you can find it easily on your student account to use.

# data[].attributes.body
You can adjust the volume so the featured effects are not too loud or drown out the other.
You go on the audio gains by right clicking, then you put a minus before the number to lower the volume and you can raise it without including that. You can select the numbers that you indeed want by typing them in. The bigger the number, the bigger the sound increase/decrease will be.

# data[].attributes.body
Once you've placed your footage and realise that there is unwanted footage that needs to be removed. This can easily be tackled by the following.
By clicking on the side options, you can notice the razor tool. By clicking that or "C", you can access this feature. Once you've done this, hover over the part that you want to remove. Finally, left click and you can delete the remaining footage by right clicking and pressing "cut".

# data[].attributes.body
You will to include the audio clips you want by clicking "I" then "O" buttons. Once you have cropped it to what you want. You can then drag it into the position where you want the sound effect to take place.

# data[].attributes.body
In order to use sound effects for your assignment, you will need footage to use.
A common way of doing this is downloading the clips off YouTube. Since sound effects are easy to find this is simple to do.

# data[].attributes.body
Firstly, you start off by dragging the main visuals onto the editing software, you do not need to edit this.

# data[].attributes.body
With timing, you have to be careful that not only that all your clips flow, and make it difficult for the audience to tell that it has been edited.
But that it fits on the beat in order for it to work. It's also important that you are able to cut a 4 minute song into a 38 second opening.
You can move clips around and delete sections if necessary.

# data[].attributes.body
If your clips end up being too long after transferring and you need to trim them down in order for it to fit.
Then the razor tool will easily take care of this problem.
On the side section, there is a list of tool symbols. You will need to select the "razor" option. Then you hover and click on the part you want to edit out.
After this has been done and split. Right click on the one you want to remove and select "cut".

# data[].attributes.body
The footage you are going to use is in this section of the editing software.
In order for you to access it, you will have to click on it. This would show up on the edited side of the screen. Once you have completed this by pressing "I" and "O". Click on the video in the lower section screen shotted, and drag it over to where you place your clips for the main product.

# data[].attributes.body
This is extremely easy to do.
You play the audio until you find the section you want that would be suitable for the opening theme.
After this, you will need to press "I" for the starting point and "O" for the ending point, then you drag it onto the part of the opening that you want.