# data[].attributes.body
Step 3

# data[].attributes.body
Step 3

# data[].attributes.headline
Step 4                                        How to check the frame rate 

# data[].attributes.subject
Step 4                                        How to check the frame rate 

# data[].attributes.body
Go into the menu. scroll down to other functions tap on other functions and scroll down till you find record setup tap on this. it should then bring up Record format. If you are in the UK select 25p

# data[].attributes.body
How to format an SD card
click the menu button on screen on the camera. Then tap the arrows on screen till you find other functions. tap on this option. then scroll through the options till you find format media. Tap this option it will then show a screen showing both SD cards tap on which card you wish to delete content a screen will pop up asking if you want to format the card tap yes.

# data[].attributes.body
How to use earphones to monitor sound levels from the microphone.
Plug in the microphone into input one or two (input 1 is at the front of the camera). (Input 2 is located above the headphone input). then plug your headphones in to the imput below the second mic input. find the switches next to sound wheels and flip the switch to 48 vaults.

# data[].attributes.body
How to correctly connect the camera to a tripod.                                           use the screw from the tripod plate and screw it in one of the hollow holes at the bottom of the camera. (Hint) use a coin to tighten the screw.
on the opposite side of the tripod plate that you screw into the camera there is an arrow showing which way the camera should face.
then slide the tripod plate on to the tripod and tighten the hatch so that the plate is secure to the tripod. to release the camera press the red button on the side and slide the tripod plate out.