# data[].attributes.body
A highlight is a bright spot in a photograph. Normally it is assumed to be one of the brightest points in the image. Highlights are normally created by a bright or intense illumination or by various forms of diffusion or reflection.

# data[].attributes.body
It's important to know what shadows, midtones and highlights are in photographic terms when it comes to using Photoshop.

# data[].attributes.body
In photography, computing, and colorimetry, a grayscale or greyscale image is one in which the value of each pixel is a single sample representing only an amount of light, that is, it carries only intensity information

# data[].attributes.body
, panned, panning. 1. to photograph or televise while rotating a camera on its vertical or horizontal axis in order to keep a moving person or object in view or allow the film to record a panorama : to pan from one end of the playing field to the other during the opening of the football game.

# data[].attributes.body
Unintentional slight movement of a camera during photography or filming, liable to cause blurring of the image

# data[].attributes.body
a wide-angle lens with a field of vision covering up to 180°, the scale being reduced toward the edges.

# data[].attributes.body
Camera resolution is measured in megapixels (meaning millions of pixels); both image ﬁle resolution and monitor resolution are measured in either pixels per inch (ppi) or pixel dimensions (such as 1024 by 768 pixels); and printer resolution is measured in dots per inch (dpi)

# data[].attributes.body
Long-exposure, time-exposure, or slow-shutter photography involves using a long-duration shutter speed to sharply capture the stationary elements of images while blurring, smearing, or obscuring the moving elements.

# data[].attributes.body
Post-processing may refer to: Image editing in photography. Audio editing software in audio.

# data[].attributes.body
Time-lapse photography is a technique whereby the frequency at which film frames are captured (the frame rate) is much lower than that used to view the sequence.

# data[].attributes.body
In burst mode, several photographs are captured in quick succession by either pressing the shutter button or holding it down.

# data[].attributes.body
Exposure compensation is the control by which you temporarily adjust your camera's definition of what is "properly exposed".

# data[].attributes.body
The exposure triangle is a common way of associating the three variables that determine the exposure of a photograph: aperture, shutter speed, and ISO.

# data[].attributes.body
is a photographic technique in which exposures are made by moving a hand-held light source while taking a long exposure photograph, either to illuminate a subject or to shine a point of light directly at the camera, or by moving the camera itself during exposure.

# data[].attributes.body
A monopod is a single pole that is used to support a camera. A tripod is a three-legged frame that is used to stabilize a camera.

# data[].attributes.body
shutter speed or exposure time is the length of time when the film or digital sensor inside the camera is exposed to light, also when a camera's shutter is open when taking a photograph.

# data[].attributes.body
This means the camera will keep taking a picture until your finger comes off the shutter button. Bulb mode is mostly used for long exposures at night.

# data[].attributes.body
Motion blur is the apparent streaking of rapidly moving objects in a still image or a sequence of images such as a movie or animation.

# data[].attributes.body
is a still camera designed primarily for simple operation. Most use focus free lenses or autofocus for focusing, automatic systems for setting the exposure options, and have flash units built in.

# data[].attributes.body
A light meter is a device used to measure the amount of light. In photography, a light meter is often used to determine the proper exposure for a photograph

# data[].attributes.body
An electronic viewfinder (EVF) is a camera viewfinder where the image captured by the lens is projected electronically onto a miniature display.

# data[].attributes.body
is the general technique of taking several shots of the same subject using different camera settings.

# data[].attributes.body
Autofocus points are what the camera uses to focus on a subject.

# data[].attributes.body
this mode is usually symbolized with a little bulb and is for shooting indoors, especially under tungsten (incandescent) lighting (such as bulb lighting). It generally cools down the colors in photos.

# data[].attributes.body
the light in shade is generally cooler (bluer) than shooting in direct sunlight so this mode will warm things up a little.

# data[].attributes.body
this setting generally warms things up a touch more than ‘daylight’ mode.

# data[].attributes.body
the flash of a camera can be quite a cool light so in Flash WB mode you’ll find it warms up your shots a touch.

# data[].attributes.body
not all cameras have this setting because it sets things as fairly ‘normal’ white balance settings.

# data[].attributes.body
this compensates for the ‘cool’ light of fluorescent light and will warm up your shots.

# data[].attributes.body
this is where the camera makes a best guess on a shot by shot basis. You’ll find it works in many situations but it’s worth venturing out of it for trickier lighting.

# data[].attributes.body
Manual-enabled modes give the photographer control over the various parameters of an exposure.

# data[].attributes.body
refers to a setting on some cameras that allows the user to choose a specific shutter speed while the camera adjusts the aperture to ensure correct exposure

# data[].attributes.body
It walks you through it

# data[].attributes.body
Program mode has the camera calculate both shutter speed and aperture (given a manually or automatically selected ISO).

# data[].attributes.body
is one of the main settings on your camera, and it lets you manually control shutter speed, aperture, and ISO.

# data[].attributes.body
is a term used by graphic designers and photographers for a small image representation of a larger image, usually intended to make it easier and faster to look at or manage a group of larger images.

# data[].attributes.body
is an image stabilization technology that minimizes blur caused by camera shake.Another advantage of lens-based VR is that a separate algorithm confirms the stabilization effect when you press the shutter release button halfway, giving you the freedom to compose your image more easily.

# data[].attributes.body
Photo metadata allows information to be transported with an image file, in a way that can be understood by other software, hardware, and end users, regardless of the format.

# data[].attributes.body
A digital single-lens reflex cameras a digital camera that combines the optics and the mechanisms of a single-lens reflex camera with a digital imaging sensor, as opposed to photographic film.

# data[].attributes.body
photography, depth of field (DOF), also called focus range or effective focus range, is the distance between the nearest and farthest objects in a scene that appear acceptably sharp in an image.

# data[].attributes.body
The focal length of the lens is the distance between the lens and the image sensor when the subject is in focus, usually stated in millimeters (e.g., 28 mm, 50 mm, or 100 mm). In the case of zoom lenses, both the minimum and maximum focal lengths are stated

# data[].attributes.body
aesthetic quality of the blur produced in the out-of-focus parts of an image produced by a lens. Bokeh has been defined as "the way the lens renders out-of-focus points of light

# data[].attributes.body
The aperture stop of a photographic lens can be adjusted to control the amount of light reaching the film or image sensor.

# data[].attributes.body
A camera mode dial, is a setting on some cameras that allows the user to set a specific aperture value (f-number) while the camera selects a shutter speed to match it that will result in proper exposure based on the lighting conditions as measured by

# data[].attributes.body
The f-number of an optical system such as a camera lens is the ratio of the system's focal length to the diameter of the entrance pupil  It is also known as the focal ratio, f-ratio, or f-stop.

# data[].attributes.body
a dark reddish-brown pigment obtained from the inky secretion of the cuttlefish. 2. any cuttlefish of the genus Sepia.