# data[].attributes.headline
arm up, and put the cords under the robot.

# data[].attributes.subject
arm up, and put the cords under the robot.

# data[].attributes.headline
back up when the robot gets close, and pick up the other robot with the arm.

# data[].attributes.subject
back up when the robot gets close, and pick up the other robot with the arm.

# data[].attributes.headline
ultra sonic sensor. You can defend by keeping your arm up.

# data[].attributes.subject
ultra sonic sensor. You can defend by keeping your arm up.

# data[].attributes.headline
Keep the arm up when not using, and make sure it it on a platform when you are porgramming or are not using it. Also use the ultra sonic sensor

# data[].attributes.subject
Keep the arm up when not using, and make sure it it on a platform when you are porgramming or are not using it. Also use the ultra sonic sensor

# data[].attributes.headline
back up when the robot gets close, and pick up the other robot with the arm.

# data[].attributes.subject
back up when the robot gets close, and pick up the other robot with the arm.

# data[].attributes.headline
ultra sonic sensor. You can defend by keeping your arm up.

# data[].attributes.subject
ultra sonic sensor. You can defend by keeping your arm up.

# data[].attributes.headline
put cords under the robot so they don't get run over because the robot won't work 

# data[].attributes.subject
put cords under the robot so they don't get run over because the robot won't work 

# data[].attributes.headline
Use the ultra sonic sensor to detect the lines that indicate the sumobot ring. You can program it to sense when another robot or other foe is close enough to attack and move away.

# data[].attributes.subject
Use the ultra sonic sensor to detect the lines that indicate the sumobot ring. You can program it to sense when another robot or other foe is close enough to attack and move away.

# data[].attributes.body
Put the cords under the robot so they don;t get pulled off, and raise the arm so it can defend its self

# data[].attributes.headline
use the sensors and back up when the robot gets close, also use good tires

# data[].attributes.subject
use the sensors and back up when the robot gets close, also use good tires

# data[].attributes.body
Put a ultrasonic sensor on the top of the robot, and have it set to a specific location to react to a certain attack.

# data[].attributes.headline
use the ultra sonic sensor to detect its surrounfing and use the moter and move steer blocks

# data[].attributes.subject
use the ultra sonic sensor to detect its surrounfing and use the moter and move steer blocks

# data[].attributes.body
Have 2 ultrasonic sensors, to detect the lines so that if it gets to close to the edge it will move away.

# data[].attributes.headline
you could get bigger tiers and make sure to keep the arm up

# data[].attributes.subject
you could get bigger tiers and make sure to keep the arm up

# data[].attributes.headline
back up when the robot gets close and use medium motor for the arm

# data[].attributes.subject
back up when the robot gets close and use medium motor for the arm

# data[].attributes.body
Assemble it right and dont pull on it to hard

# data[].attributes.headline
Use the arm to keep the other robot away so it can't fight back and push it out of the ring. Use the ultra sonic sensor to detect when the other robot is close enough to the outskirts of the ring for your robot to push it out.

# data[].attributes.subject
Use the arm to keep the other robot away so it can't fight back and push it out of the ring. Use the ultra sonic sensor to detect when the other robot is close enough to the outskirts of the ring for your robot to push it out.

# data[].attributes.body
Put the cords under the robot.

# data[].attributes.body
Use a touch senser on the arm, so the robot knows when to flip it up

# data[].attributes.body
put the arm down and make it go in a circle and rotate around the ring

# data[].attributes.body
put a ultrasonic sensor on the top.

# data[].attributes.headline
Keep the cords close to the robot's body and keep the arm straight in front of the robot to block other robots or foes from getting close enough to attack. Also, only add sensor and other attachments that are  completely necessary.

# data[].attributes.subject
Keep the cords close to the robot's body and keep the arm straight in front of the robot to block other robots or foes from getting close enough to attack. Also, only add sensor and other attachments that are  completely necessary.

# data[].attributes.body
go straight a little bit and then stop and keep doing that

# data[].attributes.body
us the directions

# data[].attributes.body
to us the arm

# data[].attributes.headline
us the ultrasonic sensor and put the arm down.

# data[].attributes.subject
us the ultrasonic sensor and put the arm down.

# data[].attributes.headline
Use the ultra sonic sensor to detect when another robot is close, . Program the arm to move into a lower position and get under the other robot, then have it move up quickly and with a lot of force.

# data[].attributes.subject
Use the ultra sonic sensor to detect when another robot is close, . Program the arm to move into a lower position and get under the other robot, then have it move up quickly and with a lot of force.

# data[].attributes.body
make the bot go strait so it will run into the other bot.

# data[].attributes.body
don't let the other dot get close and when the dot gets close go after him.

# data[].attributes.body
if you add a ultrasonic sensor your robot will stop before impact with wall.

# data[].attributes.body
robot's body and keep the arm straight in front of the robot

# data[].attributes.body
us the ultrasonic sensor and put the arm down.

# data[].attributes.body
use the ultra sonic sensor to detect its surrounding and use the moter and move steer blocks

# data[].attributes.body
Use the ultra sonic sensor to detect when another robot is close, . Program the arm to move into a lower position and get under the other robot, then have it move up quickly and with a lot of force.

# data[].attributes.body
a shield to endure hits and to counter attack with push

# data[].attributes.body
a defense mechanismto avoid heavy hits

# data[].attributes.body
spin in a circle wear out opponent and then make big attack

# data[].attributes.headline
Adding a wall in front of your bot so it does not get hurt

# data[].attributes.subject
Adding a wall in front of your bot so it does not get hurt

# data[].attributes.headline
make sure you keep your arm up so it doesn't brake 

# data[].attributes.subject
make sure you keep your arm up so it doesn't brake 

# data[].attributes.headline
to put the chords under your robot because if you don't the wheel will go on it and your robot would not move.

# data[].attributes.subject
to put the chords under your robot because if you don't the wheel will go on it and your robot would not move.

# data[].attributes.headline
the arm to push the other robot. and sensor

# data[].attributes.subject
the arm to push the other robot. and sensor

# data[].attributes.headline
arms that raise half way and pushes the other bot out of the ring. 

# data[].attributes.subject
arms that raise half way and pushes the other bot out of the ring. 

# data[].attributes.headline
Build a big large wall to put on your arm. 

# data[].attributes.subject
Build a big large wall to put on your arm. 

# data[].attributes.body
Build a wall to put on your arm

# data[].attributes.body
A big arm.

# data[].attributes.body
Arms

# data[].attributes.headline
sensors so the sensor will know not to go out of the line.

# data[].attributes.subject
sensors so the sensor will know not to go out of the line.

# data[].attributes.body
use a ultrasonic sensor so it can see when a robot is coming so it can move

# data[].attributes.headline
ultrasonic sensor and to keep your arm down

# data[].attributes.subject
ultrasonic sensor and to keep your arm down

# data[].attributes.body
go full speed.

# data[].attributes.body
Figure out where the robot may be hit and try to protect that part of the robot. Don't put batteries because you might have to replace the batteries during a battle

# data[].attributes.body
use the sensors

# data[].attributes.body
make the sensor run into people

# data[].attributes.body
You can put a metal plate in front of it that extends and when the robot goes forward, your oponnent will be pushed out.

# data[].attributes.body
Add more legos to protect it you can also use the arm.

# data[].attributes.body
use the sensor to detect the line of the ring

# data[].attributes.body
If there is was a black circle you could program your robot that when it detects a black line to stay away. I could program the robot to back up when it detects something in front of it.

# data[].attributes.body
move until it finds an object in the ring

# data[].attributes.body
Your sensor and your arm on the robot will let it know when it approaches a wall.

# data[].attributes.body
You should use your move tank and the sensor.

# data[].attributes.body
I could build a stronger arm and that could attack the other robot.