# data[].attributes.body
https://www.google.com/search?hl=en&tbm=isch&q=post+and+beam+bridge&oq=&gs_l=&safe=active&ssui=on#imgrc=B-ttGLRkDw_QmM%3A
and
https://www.google.com/search?q=pennies&rlz=1CALEAA_enUS710US710&source=lnms&tbm=isch&sa=X&ved=0ahUKEwj2gbCbmtnPAhXGeSYKHaakBa0Q_AUICCgB&biw=1366&bih=631&safe=active&ssui=on#imgrc=rnJ9AaRhiib8NM%3A

# data[].attributes.body
Some things that I would do differently this time would be to try and make  a truss bridge because last time the structure was not well put together with the beam bridge so next time I would either try to make the bridge hold more by being more sturdy or try to make an truss bridge.
Yes I would make a truss bridge or a beam bridge if I had to make a different bridge. I would make that whole lot more with support then I had with my first bridge.
Evaluate yourself. Did you collaborate and work well with your partner? What are some things you can do better next time? my partner and I worked well together even though he was absent most of the time when he was here we shared ideas back and forth and went along with what we thought would work the best. Some better things for next time is to read through the criteria carefully and not rush it.

# data[].attributes.body
My model has three beams as it support system, the beams are made out of rolled up paper. The deck of the bridge is named out of folded up pieces of paper. The pieces of paper that make up the bridge is folded because we thought that folded up pieces of paper should make it able to hold more pennies. The we put pieces of paper on the bottom of the bridge to hold everything in place.
For the penny stack the result that I got was four pennies stacked.The result for the penny spread the pennies that would be there is the amount of four.

# data[].attributes.body
Some of the challenges that my partner and I faced were not meeting the criteria that said that the boats needed to fit under the bridges and they had certain areas and lengths were the boats had to measure to fit underneath the bridge. So my partner and I had to restart are whole design with scrap pieces of paper left over from the first bridge design. Some constraints that I had to design around was only being able to use four sheets of paper and two, twelve inches of tape. We also had to make two paper cups ( or boats). I also was not allowed to use any objects other then the paper and the tape.
The criteria that each group in the class had to meet was that you had to be able to slide the paper cup, which in this case was also known as the boats, underneath the paper and tape bridge. We also had to use the criteria on how much of each supply that we got from the teachers.

# data[].attributes.body
Some ideas that me and my partner had was to make a suspension bridge. Another possibility would be to make a beam for the bottom of a beam bridge with rolled up paper.  The bridge that my partner and I decide to build was the beam bridge. We decided on the beam bridge because we felt that it was the most  sturdy and the bridge that would hold the most weight.

# data[].attributes.body
The initial problem that my partner and I were trying to solve was that we needed to make a bridge that could hold lots of cars {or pennies} ans with the pennies on the paper it would not  fall or break.