# data[].attributes.body
make a sand castle

# data[].attributes.body
c.b Place the pan on a burner over medium heat. You can burn the sugar if you heat the solution too fast. Boil the mixture. This will cause the water to evaporate and sugar crystals to form on the sides of the pot.

# data[].attributes.body
sit in bleach and it will come out

# data[].attributes.body
put the sand it water scrub until it comes out with
j.b use filters to remove the sand from water

# data[].attributes.body
c.b  One of the easiest ways to remove hydrocarbons from water or coolant is by using a belt oil skimmer. It is a low maintenance, easy to use tool for removing oil from water or coolant. and collect the floating oil.

# data[].attributes.body
urdle that must be overcome to turn seawater into fresh water is to remove the dissolved salt in seawater. That may seem as easy as just boiling some seawater in a pan, capturing the steam and condensing it back into water(distillation)

# data[].attributes.body
boil the salt water then catch the water vapour and wait for it to cool down and you will get fresh water

# data[].attributes.body
Research any ideas other people have come up with which may be able to remove pollutants from the water filtered through. Photos, drawings and descriptions are helpful.

# data[].attributes.body
letting it sit for a while than it will go away

# data[].attributes.body
j.s- you can remove oil by burning it off with fire, freeze it and take It out or use a filter that filters oil out of water or some do it vice versa

# data[].attributes.body
M.G boil the water with soap